GB/T 2885.3-1981 Basic parameters and dimensions of single-side curved track side-dumping mine cars for metal mines
Basic Information
Standard ID:
GB/T 2885.3-1981
Standard Name: Basic parameters and dimensions of single-side curved track side-dumping mine cars for metal mines
Chinese Name:
金属矿单侧曲轨侧卸式矿车 基本参数及尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-02
Date of Implementation:1982-07-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Mining and Mineral Products >> 73.100 Mining Equipment
Standard Classification Number:Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-12-31
Review date:2004-10-14
Drafting unit:Beijing Nonferrous Metallurgy Design and Research Institute
Focal point unit:National Technical Committee for Standardization of Mining Machinery
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 2885.3-1981 Basic parameters and dimensions of single-side curved track side-dumping mine cars for metal mines GB/T2885.3-1981 standard download decompression password: www.bzxz.net
Some standard content:
The People's Republic of China
National Standard
Metal mine single-side curved track side-discharging mine car
Basic parameters and dimensions
GB2885.381
This standard applies to underground metal mines (or other mines with similar ore properties and mining methods), transporting ore, waste rock or other materials along underground tunnels and surface industrial sites. 1. The basic parameters and dimensions of metal mine single-side curved track side-discharging mine cars shall comply with the provisions of the table. Note: This figure only indicates the size symbol
Published by the State Administration of Standardization
Proposed by the State Administration of Nonferrous Metals Industry and implemented on July 1, 1982
Drafted by Beijing Nonferrous Metallurgy Design and Research Institute, a total of 3 pages, page 2
YCC2-6
YCC2-7
YCC4-7
YCC4-9
Load
GB2885.3-81
Overall dimensions
Note: ①Height H and traction height h are calculated from the rail surface (when empty). ②Load is calculated based on the loose specific gravity of the material = 2.5t/m. Height
Traction high traction
ikAoNrkAca
Unloading angle
(not small
(not large
The model of the single-side curved rail side-unloading mine car for metal mines is specified as the marking example:
Volume 2m3, gauge 600mm metal mine single-side curved rail side-unloading mine car YCC2-6 mine car GB2885.3-81
Total 3 pages Page 3
Gauge code: 6 means 600mm
7 means 762mmbZxz.net
9 means 900mm
Volume code (m3)
Mine car code
Single-side curved rail side-unloading code
Metal mine code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.