HG/T 2606-1994 Rubber Single Screw Extruder Product Quality Grading and Inspection Rules HG/T2606-1994 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
HG/T2606-94
Rubber Single Screw Extruder
Product Quality Grading and Inspection Rules
Published on April 8, 1994
Implemented on October 1, 1994
The Ministry of Chemical Industry of the People's Republic of China published the Chemical Industry Standard of the People's Republic of China
Rubber Single Screw Extruder
Product Quality Grading and Inspection Rules
Title Content and Applicable Model
HG/T 2606-94
The standard specifies the product quality assessment indicators and evaluation methods of rubber single screw extruder (hereinafter referred to as extruder) in accordance with HG/T2395 "General Rules for Product Quality Grading of Rubber Extruders". This standard is applicable to the assessment and evaluation of the product quality of hot-feed, cold-feed (including exhaust-feed) rubber single screw extruders. The Eastern Standard is not applicable to the product quality rating of pin-type cold-set material dispensing machines and rubber filters. Applicable standards GB10481 Technical conditions for rubber single-screw extruders GB10432 Rubber single-screw dispensing machine series GB/T13306 Labels HG/T2108 Determination of sound pressure level of rubber machinery noise ZBG95010 General technical conditions for painting of rubber and plastic machinery ZBG95012 Testing methods for rubber single-screw extruders t||HG5-1541 General technical conditions for rubber machinery appearance HG5-1543
3 Main assessment contents
General technical conditions for rubber machinery packaging
Approved by the Ministry of Chemical Industry of the People's Republic of China on April 8, 1994 and implemented on October 1, 1994
3.1 Design structure and control of products (see Table 1) HG/T2606-94
Quality island characteristics|| tt||Mass disc characteristics
Feeding part
Cold feed
Extruder
Screw speed
Hot feed
Extruder
Temperature control
Temperature control accuracy ℃
Pressure in die head
Importance
Category code
Superior product
Quality characteristic value
First-class product
Other The structure should enable stable conveying and uniform feeding of rubber materials. The screw speed should have stepless adjustment function and display device, which are the same as the requirements of cold feed extruder. Qualified products comply with the provisions of Article 3.4 of GB10481. The head, body and screw of cold and warm feed extruders can automatically adjust and display the temperature respectively. Hot feed extruder allows manual control. Cold feed extruder should have a head pressure indicator. Comply with design. Check drawings and objects. (1) Check drawings and objects. (2) Measure screw speed according to 3.1 of ZBG 95012. Check drawings and objects. Check design documents and objects. 3.2 Product performance (see Table 2). Quality characteristics. Maximum extrusion capacity. Rubber temperature at die outlet ℃. Unit rubber power consumption kw-h/kg. |Assembly (see Table 3)
Quality characteristics
Importance
Specification code
Quality characteristics
Quality characteristics
Screw and bushing
Distribution of fitting clearance along the
circle
Temperature control, pneumatic,
hydraulic pipeline system
Sealing
Importance||t t||Category code
HG/T2606-94
Quality
Superior product
First-class product
Qualified product
Conform to the provisions of Articles 3.1 to 3.3 of GB10482
Conform to the provisions of Article 3.3 of GB10481
Reduce by 1 according to the provisions of Article 3.13 of GB10481 5%
Superior product
Quality disc characteristic value
First-class product
The minimum value of the single-side clearance of a screw with a fixed shaft end structure shall not be less than
1/4 of the maximum value of the single-side side clearance
Qualified product
The minimum value of the single-side clearance of a screw with a fixed shaft end face structure shall not be less than
1/4 of the maximum value of the single-side side clearance 1/5 of the maximum value
The screw of the floating structure shall not scratch the inner surface of the sleeve. It complies with the provisions of Article 3.12 of GB10481
Inspection is in accordance with the law
Inspect according to Article 3.4 of ZBG95012
Inspect according to Article 3.2 of ZBG95012
Inspect according to Article 3.2 of ZBG95012||tt ||Article 3.5 Inspection
Inspection method
Inspect according to Article 2.3 of ZBG95012
3.4 ​​Parts (see Table 4)
Quality characteristics
Screw outer diameter tolerance
Bushing inner diameter tolerance
Roughness Raum
Screw thread working surface
Bushing inner hole surface
Nitriding hardness HV
Nitriding layer depth
Roughness Raum
Nitriding hardness HV
Nitriding layer depth
HG/T2606-94
Quality characteristics
Importance
Category code
※When treated by other methods, the corresponding hardness of nitriding treatment should also be achieved. Quality characteristics
Superior products
First-class products
Qualified products
Comply with Article 3.10
of GB10481
Comply with Article 3.8
Comply with Article 3.9 of GB10481
General measuring tools
Measure the actual object
Inspect according to Article 2.1 of ZBG95012
According to ZBG9501 2
Article 2.2 Inspection
Test sample
3.5 Quality characteristics of purchased electromechanical supporting components (see Table 5)
Quality characteristics
Main electromechanical
Supporting components
Quality of parts
Safety and environmental protection (see Table 6)
Painting,
Quality characteristics
Noise level of idling
Pressure level dB(A)
Interlocking control
Importance
Category code No.
Quality characteristics
Importance
Category code
Appearance and packaging (see Table 7)
Quality characteristics
Quality characteristics
Painting, rust prevention and
Machining surface
Appearance quality
Inside the product
Cleanliness
Packaging quality
Random delivery
Technical documents
Importance
Category code
2606 -94
Quality Special
Superior
Can ensure the quality of the whole machine
Superior
First-class
Can ensure the quality of the whole machine
Superior
First-class
Qualified
Can ensure the quality of the whole machine
Qualified
Conforms to GB10481 Section 4.4 regulations
Superior products
First-class products
Qualified products
Painting shall be in accordance with ZBG95010, and anti-rust materials shall be applied after cleaning the machined surface
Comply with HG5-1541
No stagnant water, no residual debris, etc.
Comply with HG5-1543
Comply with GB/T13306 requirements
Complete, unified, correct, clear,
Comply with relevant standards
Inspection methods
Inspection vouchers
Or physical objects
Inspection methods
According to HG/T2108|| tt||Regulations for inspection
Inspect the physical object
Inspection method
Inspection according to standards
Inspect the physical object
Inspection according to standards
Inspect the physical object
Inspect the physical object
3.8 User evaluation (see Table 8))
Quality sustainability
Product quality level
Quality nature
Key points
Category code
Quality characteristic value inspection record sheet (see Table 9)
Quality considerations
Importance
Category code
4. Evaluation of product quality grade
Superior product
G/T2606-94
Superior product
Prohibited product
Qualified product
Users recognize that the product has reached the corresponding grade level. Table 9www.bzxz.net
Quality characteristic value
Qualified product
4.1 Evaluation method of product quality grade (see Table 10) Importance category
Quality grade
Superior product||t t||First-class products
Qualified products
Superior products
First-class products
Cumulatively reached
Qualified products
Superior products
Cumulatively reached
Cumulatively reached
Superior products
Inspection method
Check user feedback
Feedback materials
Evaluation results
Qualified products
First-class products||t t||Qualified products
Year, month, day
All met
One defect is allowed
Two defects are allowed
4.2 Summary of product quality and grade evaluation table (see Table 11) Manufacturer name
Product name
Specification model
Product number
Completion date
Quality characteristics
Importance
This product's evaluation grade| |tt||Quality Manager
Additional Notes:
This standard was proposed by China National Chemical Equipment Corporation HG/T2606-94
Product Drawing Number
Factory Number
Item Number
Superior Products
First-class Products
Qualified Products
Unqualified
This standard is under the jurisdiction of the National Rubber and Plastic Machinery Standardization Technical Committee Rubber Machinery Standardization Technical Committee. This standard was drafted by Shenyang Rubber Machinery Factory, and the main drafter of this standard is Sheng Guihua.
People's Republic of China
Chemical Industry Standard
Product Quality Grading and Inspection Rules for Rubber Single Screw Extruders HG/T2606-94
Editor China National Chemical Equipment Corporation
Postal Code 100011
Printed by Beijing Institute of Chemical Technology Printing Plant
Copyright reserved
Format 880×1230
First Edition March 1995
No Reprinting
16-909
13.5 thousand words
First Printing March 1995
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.