HG/T 2457-1993 General Rules for Inspection, Marking, Packaging, Transportation and Storage of Pigment Products HG/T2457-1993 Standard Download Decompression Password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
General Rules for Inspection, Marking, Packaging,
Transportation and Storage of Pigment Products
1 Subject Content and Scope of Application
This standard specifies the general rules for inspection, marking, packaging, transportation and storage of pigment products. This standard applies to pigment products.
2 Referenced Standards
GB191 Pictorial Marking for Packaging, Storage and Transportation
GB1250 Method for Representation and Determination of Limit Values ​​GB9285 Sampling of Raw Materials for Paints and Varnishes 3 General Rules for Inspection
HG/T 2457—93
3.1 The quality of pigment products shall be inspected in accordance with the provisions of the corresponding national standards, industry standards or enterprise standards. 3.2 Product inspection is divided into type inspection and factory inspection. All technical requirements listed in the product standard are type inspection items. Under normal production conditions, the interval (cycle) of type inspection shall be specified. In addition, new products should be tested for type identification; when the formula, process, and raw materials of the product change, when the product resumes production after a long period of suspension, or when the national quality supervision agency proposes type inspection requirements, type inspection should be carried out.
Product standards should also clearly specify the items of factory inspection, that is, the various tests that must be carried out when the product is delivered. 3.3 Before leaving the factory, the inspection department of the manufacturer should conduct batch inspections according to its product standards (a certain number of products produced under consistent conditions or aggregated in a prescribed manner is a batch). The manufacturer should ensure that all batches of products leaving the factory meet the technical requirements of its standards. The products should have a certificate of conformity, and if necessary, a product quality certificate, instructions for use, and precautions should be attached. The quality certificate should at least include the following contents:
Product model, name, grade and standard number; manufacturer name and trademark;
Batch number and effective storage period;
Inspection results or proof that the product meets the technical requirements of the standard; e.
Inspector signature and inspection seal;
Inspection date.
3.4 ​​The product shall be sampled in accordance with the relevant provisions of GB9285, and the number of samples taken shall be specified. After the samples are mixed evenly, they shall be divided into two dry, clean ground-mouth brown glass bottles. Labels shall be affixed to the bottles, indicating: sample model, name, production batch number and quantity, sampling date and name of the sampler. The bottle shall be sealed and stored for future reference, and the other bottle shall be used as a sample for inspection. 3.5 The receiving department has the right to inspect the product in accordance with the provisions of the product label. If it is found that the quality does not meet the technical requirements, the supply and demand parties shall jointly re-take double samples for re-inspection in accordance with GB9285. If it still does not meet the provisions of the product standard, the product shall be a substandard product. 3.6 The supply and demand parties shall inspect and check the packaging, quantity and marking of the product. If it is found that the packaging is damaged, the quantity is inconsistent, the marking does not meet the regulations, etc., the relevant departments shall be notified in time for handling. Approved by the Ministry of Chemical Industry of the People's Republic of China on June 29, 1993 and implemented on April 1, 1994
HG/T2457-93
3.7 When a dispute arises between the supply and demand parties over product quality, the product quality supervision and inspection agency shall conduct arbitration. 3.8 The inspection results shall be determined in accordance with the rounded value comparison method in GB1250. 4 Marking
The packaging container of pigment products shall be printed with firm and clear markings, including: a.
Manufacturer name;
Product name;
Registered trademark;
Standard code of the product;
Model;
Quality grade;
Production batch number;
Net weight,
Production date;
The "*Afraid of moisture" mark specified in GB191.
5 Packaging||t t||5.1 The packaging materials (or containers) of pigment products must be moisture-proof and pollution-proof. They should not have physical or chemical reactions with the pigment products and should not affect the product quality. Www.bzxZ.net
Pigment products can be packaged in one or more of the following containers as needed. a.
Iron barrel;
Wooden barrel;
Cardboard barrel;
Fiberboard barrel;
Plastic woven bag,
f. Multi-layer kraft paper bag.
All the above packaging containers must be lined with plastic film bags or take other moisture-proof measures. 5.2 The appropriate packaging quantity of each pigment should be specified. 5.3 The packaging should be accompanied by the product logo (see Chapter 4). Transportation and storage
Pigment products should be stored in ventilated and dry places according to grade, classification and batch. It is strictly forbidden to contact with items that may react with the product, and attention should be paid to preventing 6.1
6.2 Any product that leaks out of the packaging container shall not be put back into the packaging container. 6.3 Transportation, packaging During unloading, the product should be loaded and unloaded gently to prevent the packaging from being contaminated and damaged. The product should be protected from rain and sunlight during transportation. 6.4 It should not be transported together with items that may deteriorate the product or damage the packaging. 6.5 It should comply with the relevant regulations of the transportation department. Additional remarks:
This standard was proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee on Paint and Pigment Standardization. This standard was drafted by the Paint Industry Research Institute of the Ministry of Chemical Industry. The main drafters of this standard are Su Mei and Wu Liangjun. 1262
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.