GB/T 15233-1994 Packaging unit dimensions
Basic Information
Standard ID:
GB/T 15233-1994
Standard Name: Packaging unit dimensions
Chinese Name:
包装 单元货物尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1994-09-02
Date of Implementation:1995-04-01
Date of Expiration:2008-07-01
standard classification number
Standard ICS number:Packaging and transportation of goods>>55.020 Packaging and transportation of goods
Standard Classification Number:Road and water transport>>Road and water transport>>R08 marking, packaging, transportation, storage
Publication information
publishing house:China Standards Press
Publication date:1995-04-01
other information
Release date:1994-09-28
Review date:2004-10-14
Drafting unit:Institute of Standards and Metrology, Ministry of Transport
Focal point unit:National Packaging Standardization Technical Committee
Publishing department:State Bureau of Technical Supervision
competent authority:National Standardization Administration
Introduction to standards:
This standard specifies the maximum bottom plane dimensions of a packaged unit of goods during the circulation of goods. This standard applies to single goods transported by road, rail, water and air. GB/T 15233-1994 Package unit dimensions GB/T15233-1994 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Unit load size
Packaging--Unit load size
This standard is equivalent to the international standard ISO3676 "Unit load size for packaging". 1 Subject content and scope of application
This standard specifies the maximum bottom plane dimensions of packaging unit loads during the circulation of goods. This standard applies to unit loads transported by road, rail, water and air. 2 Reference standards
GB1834 Minimum internal dimensions of general containersGB2934 External dimensions of intermodal flat palletsGB4122 General terms for packaging
Rigid rectangular transport packaging dimensions
GB4892
GB13201 Cylinder transport packaging dimensions series Bag transport packaging dimensions
GB/T13757
3 Terms
3.1. Distribution of goodsGB/T 15233-94
The process of transporting products from their place of origin to their destination, including basic elements such as packaging, unit load, transportation, loading and unloading, and storage. 3.2 Unit load
A group of goods or packages are fixed together by one or more means to form an integral unit to facilitate loading and unloading, transportation, stacking and storage. bzxz.net
3.3 Plan dimension
The rectangular dimension formed by four vertical planes intersecting each other perpendicularly on a horizontal plane. These four vertical planes can contain unit cargo placed freely on the horizontal plane (see figure). Approved by the State Administration of Technical Supervision on September 28, 1994 and implemented on April 1, 1995
4 Maximum plan dimension of unit cargo
The maximum plan dimension of unit cargo is shown in the table below. Serial number
Note: α Unit cargo plan length dimension 5--Unit cargo plan width dimension. 112
GB/T15233-94
Maximum bottom plane dimensions of unit cargo
Maximum bottom plane dimensions of unit cargo
Dimensions (a×b)
1200×1000
1200×800
1140X1140
Allowable deviation
Additional instructions:
GB/T15233-94
This standard is proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Packaging Standardization. This standard is drafted by the Standard Metrology Institute of the Ministry of Transport. The main drafters of this standard are Xiong Caiqi, Wang Wei, Li Jianhua, Zhang Jin, and Sun Xiqiu. 113
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.