GB 16487.8-1996 Standard for environmental protection control of imported waste Waste motors GB16487.8-1996 Standard download and decompression password: www.bzxz.net

GB16487:8-1996 | | tt | Environmental pollution caused by hazardous waste entrained in the environment. This standard will be implemented on a trial basis from August 1, 1996. This standard is proposed by the Pollution Control Department of the National Environmental Protection Administration. The National Environmental Protection Administration is responsible for interpreting this standard. com1 Scope
National Standard of the People's Republic of China
Environmental Protection Control Standard for Imported Waste
Electricity
Waste
(Trial)
Machine| |tt||Environmental protection control standard for imported scrap material
Scrap motor
GB16487.81996
This standard specifies the entrainment and radioactive contamination in imported scrap motors that may affect the environment Control requirements. This standard applies to the import of scrap motors.
2 Reference Standards
SN0577--1996 Inspection Regulations for Imported Scrap Electric Motors (Trial) GB8703--88 Radiation Protection Regulations
SN0570--1996 Inspection Regulations for Radioactive Contamination of Imported Scrap Metals (Trial) GB5085.3-1996 Hazardous Waste Identification Standard Leaching Toxicity Identification GB1301591 Polyzobiphenyl-containing Waste Pollution Control Standard GB/T15555.1~15555.12--1995 Solid Waste Leaching Toxicity Determination Method 3 Definition
This standard adopts the following definitions :
Entrained waste
refers to the waste materials that are mixed into imported scrap motors during the collection, packaging and transportation processes and cannot be directly utilized as raw materials (excluding the packaging of imported scrap motors and those in the transportation process) other substances that need to be used). 4 Control standards and requirements
4.1 It is prohibited to mix imported waste motors with entrained waste whose concentration of harmful substances in the leachate exceeds the identification standard value in GB5085.3-1996.
4.2 It is forbidden to mix waste with polychlorinated biphenyl content exceeding the control standard value in GB13015-91 into the waste motor. 4.3 Imported waste motors are prohibited from being mixed with entrained waste whose leachate pH value is ten or greater than 12.5 and equal to or less than 2. 4.4 Radioactive waste is prohibited from being carried in imported scrap motors. 4.5 The radioactive material pollution control indicators in imported scrap motors should comply with the requirements of GB8703-88 regarding the control level of radioactive material pollution on the surface of objects.
4.6 The total weight of the following wastes contained in imported scrap motors shall not exceed one ten thousandth of the weight of imported scrap motors. Approved by the National Environmental Protection Administration on July 29, 1996 and implemented on August 01, 1996
a)
b)wwW.bzxz.Net
Explosive waste;
Asbestos waste;
Incineration disposal residue;
e
d)||tt ||e)
f)
g)
h)
GB16487.81996
Beryllium, hexavalent chromium, arsenic, selenium,, antimony , tellurium, mercury, lead and its compound waste, waste containing fluorine, cyanide, phenolic compounds; various liquid wastes;
Clinical waste:
Kitchen waste, bathroom waste,||tt || Sealed containers, etc.
4.7 In addition to the wastes listed in the above items, other entrained wastes in imported waste motors that cannot be directly used as raw materials during their processing and utilization (such as waste wood blocks, waste paper, slag, mud and sand, waste fiber , waste glass, cement blocks, stripped rust, waste plastics and waste rubber, etc.) the total weight shall not exceed 2% of the weight of imported waste motors.
5 Inspection
5.1 The inspections in Articles 4.1 and 4.3 of this standard shall be carried out in accordance with the provisions of GB/T15555.1~15555.12-1995. 5.2 The inspection in Article 4.2 of this standard shall be carried out in accordance with the provisions of GB13015--91. 5.3 The inspections in Articles 4.4 and 4.5 of this standard shall be carried out in accordance with the provisions of SN0570---1996. 5.4 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of SN0577--1996.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.