The external dimensions of the bidirectional thrust angular contact ball bearings specified in this standard adopt the external dimensions of similar bearings in the world. This standard will replace all the contents of JB/T 6362-92, expand the size range of the 2344 and 2347 series, add the size tables of the 2349 and 2349X series, and incorporate JB 5386-91 into the technical requirements for finished products of bidirectional thrust angular contact bearings Incorporated, the size range is expanded, and the bearing preload grouping section is added. This standard specifies the overall dimensions and finished product technical requirements of 2344, 2347, 2349, and 2349X series bidirectional thrust contact ball bearings for machine tool spindles. This standard applies to the manufacturing, inspection and acceptance of bearings. JB/T 6362-1995 Rolling bearings Bidirectional thrust angular contact ball bearings for machine tool spindles JB/T6362-1995 Standard download and decompression password: www.bzxz.net

JB/T6362 | | tt | Shou. This standard replaces the content of JB/T6362-92 "Rolling Bearing Bidirectional Thrust Angular Contact Ball Bearing Outline Dimensions", expands the size range of the 2344 and 2347 series, adds the size tables of the 2349 and 2349X series, and replaces the J13538691 machine The technical requirements for finished products of bidirectional thrust angular contact ball auxiliary bearings in "Supplementary Technical Conditions for Ball Main and Auxiliary 1 Precision Rolling Bearings" are opened and expanded to a wide range of sizes. The provisions for grouping of preloaded bearings are added.
This standard will replace JB/T6362·92 and partially replace JB5386--91 from the date of implementation.
Appendix A of this standard is a reminder appendix.
This standard is proposed by the National Rolling Bearing Standardization Technical Committee. This standard is administered by the Luoyang Bearing Research Institute of the Ministry of Machinery Industry. This standard was drafted by: Harbin Bearing Co., Ltd. This standard was drafted by: Yong Taifang, Pang Jun. This standard was first formulated in 1992.
515
1 range
Machinery Industry Standard of the People's Republic of China
Rolling bearings
Bidirectional thrust for machine tool spindles
Angular contact ball bearings| | tt | (hereinafter referred to as the bearing) overall dimensions and finished product crystal technical requirements.
This standard applies to the manufacturing, inspection and acceptance of bearings. 2 Reference standards
The provisions contained in the following standards constitute provisions of this standard through reference in this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties using this standard should explore the possibility of using the latest version of the standard listed below. GB/T 272---93
GB 307.284
GB 307. 3---84
Rolling bearings
Code method
Tolerance measurement method
Rolling bearings
Rolling bearings
--General technical requirements
GB 308 -89±
Rolling bearing steel balls
R 4199-84| | tt | Symbols, definitions and abbreviations
The symbol is shown in Figure 1.
This standard adopts GB4199 and the following symbols and definitions. d: Nominal inner diameter of the shaft washer
di: Nominal outer diameter of the shaft washer
dsinax: Maximum single outer diameter of the shaft washer
D: Nominal outer diameter of the seat washer
B: Nominal height of the shaft ring
C: Nominal height of the seat ring
A: Bidirectional thrust angular contact ball bearing seat ring single height deviation T': Bearing nominal height
△: Bidirectional thrust Deviation of single height of angular contact ball bearing T1: actual height of the bearing after preloading (without inner spacer ring) T:: actual height of inner component (quotient of two shaft rings + height of inner spacer ring) r; end face of shaft ring Nominal chamfer size
Ministry of Machinery Industry approved on 1995-06-16
516
1996·07-01 Implementation
ruain:" minimum one-way size|| tt |
S:: Variation of the thickness of the raceway of the double-direction thrust angular contact ball bearing shaft ring relative to the bottom surface S.: Variation of the thickness of the raceway of the raceway of the two-way thrust angular contact ball bearing relative to the bottom surface Basket: After the bearing is preloaded, Deviation of deformation d.
d,
Figure 1
4 code
230000 type two-way thrust angular contact ball bearing code method except as follows (G13/T272 In addition to the provisions of JB/T2974, the preload is as follows: a) New preloads are not marked with a code
h) All other groups of preloads are added with a group number after the tolerance grade code. For example, \/UP5" means [JP-level tolerance is the preload bearing of Group 5.
c) The special preload is represented by the letter \G” plus the preload value (unit N) after the tolerance level. 5 Dimensions
5.1 The overall dimensions of the bearing are shown in Table 1 ~ Table 4.5.2
The nominal contact angle of the bearing is 60°.
44 series
Table!
Bearing code
231405
234406
234407
234408
234409
234410
234411
234412
234413
234414|| tt||d
25
30
35
40
45
50
55||tt| |60
65
70
D
17
55
62
68
75
80
90
95
100
110
T
28
32|| tt||34
36
38
38
14
44
44
d una||tt ||40
47
53
58.5
65
70
78
83
88
97
7
8
8.5
9
9.
9.5
11
11
11
t
1.4
16
17
18
19|| tt||19
22
22
22
2.1
0.6
1
1||tt| |1
1
1. 1
1. 1
1.1
1.
nm
ta| |tt||0.15
0.15
c.15
0. 16
h.15
0.15
03. 3| |tt||0.3
. 3
0.3.
234421
234422
234124
234426
234428
234430
234432
234434|| tt||234436
234438
234440
234444
231448
234452
234456
234460||tt| |234464
231168
234472
234476
284480
长戚代号
23-4705
234706|| tt||234707
234708
234709
234710
234711
234712
234713
234714||tt| |234715
234716
234717
234718
234719
518
d
75
80
85
90
95
100
105
110
120
130|| tt||140
150
160
170
180
190
200
220||tt| |240
260
280
300
320
340
360
380
400
27
32
37
42
47
52
57
62|| tt||67
73
78
83
88
93
98
D||tt| |115
125
130
140
145
150
160
170
180
200
210
225
240
260
280
290
310|| tt||3.40
360
400
420
460
180
520
540||tt| |560
600
D
47
55
62
68
75
80
90
95
1.00
110
115
125
130
140|| tt||145
JB/T 6362---1995
表1（完）
注1mae
48
54||tt| |54
60
60
60
66
72
72
84
84
90
96
108
120
120
132
144
144|| tt||164
164
190
190
212
212
212
236||tt| |102
110
115
123
128
133
142
150
160
177
187
200
212
230
248
258
274|| tt||304
322
354
374
4.06
426
459
479||tt| |499
532
表247系列
ed
28
32
34
36||tt| |38
38
44
44
-44
48
48
54
54
60
60
40
47
53
58.5
65
70| |tt||78
83
88
97
102
110
115
123||tt ||128
12
13.5
13.5
15
15
15
16.5
18
18
21
21
22.5
24
27
30
30| |tt||33
36
36
411
41
47.5
47.5
53||tt ||53
53
59
B
8.5
9
9.5
9.5
11
11
12
12
12
13.5
13.5
15
15| |tt||(
24
27
27
30
30
30
33||tt ||36
36
42
42
45
48
54
60
60
66
72
72
82
82
95
95
106| |tt||106
106
118
C
14
16
17
18||tt ||19
19
22
22
22
24
24
27
27
30
30
rou
1.1
1.1
1.1
E， 5
1. 5
1. 5
2
2
2.1
2.1
2.1
2.1
2.1
2. 1
2.1
3
3
3
3
3
3
3
3| |tt||3
3
Precrnin
o.6
1
1
1
1| |tt||1.1
1. 1
1.1
1. 1
1.1
1.1
1. 1||h||1.5||h||1.5||h||mm||h||suin||h||0. 3
0.3
0.3
0.3
0.3
). 3
0.6
0. 6
0.6
0.6
0.6
0.6
0.6
0.6
(3.6
0.6
0.6
1
1
1.5
1.5
1.
1.5
1.5
1.5
1.5
mm
rxmin
0.15
0.15
0.15|| tt||0. 15
0.15
0.3
(3. 3
0.3bZxz.net
0.3
0.3. |234722
231724
234726
234728
234730
234732
234734
234736
234738
234740
234744
234748
234752
234756
234760
234764
234768|| tt||234772
234776
234780
小明代号
234905
234906
234907
234908||tt ||234909
284910
234911
234912
234913
231914
234915
234916
234917
234918
234919
234920
234921
234922
234924
d
103| |tt||109
114
1.24
135
1.45
155
165
176||tt ||187
197
207
228
248
269
289
310
330
350
370
390
410
25
30
35
40| |tt||45
50
55
60
65
70
75
80||tt ||85
90
95
100
105
110
120
D
150
160
170
180
200
210
225
240
260| |tt||280
290
310
340
360
400
420
460||tt ||480
520
540
560
600
D
42
47
55
62
68
72
80
85
90
100
105| |tt||110
120
125
130
140
145
150
165||tt ||JB/T 6362
1995
表2（完）
T
60
66
72||tt| |72
8.4
8.4
90
96
108
120
120
132
14.1
144
164
164
190
190
212
212|| tt||212
236
de
133
142
150
160
177||tt| |1.87
200
212
230
248
258
274
304
322
354
374
406
426
139
479
499
532|| tt||49系列
表3
ct 4m x
22
26
28
28
28
32
32
32
38
38
38
44
44|| tt||44
48
48
48
54
37
43
49||tt| |54
59.5
64
72
77
82
89
94
99
106
111
116
126
131
136
150
3|| tt||15
16.5
18
18
21
21
22.5
24||tt| |27
30
30
33
36
36
41
41
17.5
47.5
53
53
53
59
5.5
5.5
6.5|| tt||7
7
7
8
80
8
9.5
9.5||tt| |9.5
11
11
11
12
12
12
13.5
3t| |tt||33
36
336
42
12
45
48
54||tt ||60
60
66
72
72
82
82
95
95
106
106
106
118
C
11
11
13| |tt||14
14
14
16
16
16
19
19||tt ||19
22
22
22
21
21
2-1
27||tt ||1. 5
2
2
2
2
2. 1
2.1
2. 1
2.1
2. 1
2.1
2.1
3
3
3
3
3
3| |tt||3
3
3
T'srrin
0.6
0.6
1
1| |tt||1.
1
1
1
1
mn
:-
09.3| |tt||0.6
0.6
0.6
0. 6
09.6
3. G
3. ti
.6
0.6
G.6
0.6
1
1
1.5||tt| |1. 5
1.5
1.5
1.5
1.5
1. 5||ht||1.5||ht||mm||ht||rixanin||ht||0. 1
(. 1
).
(0. 3
(). 3
0. 3
0.5
0.5
0. 5||tt| |0.5
(3. 5
. 5
0.5
0.6
.6
(. 6
(.6
0.6
.
519
北京代号
234926
234928
234930||tt| |234932
234934
23-1936
234938
231941
234944
231948
231952||tt| |234956
234960
234961
小明代号
234920X
234921X
231922x
234924X
234926X
234928x
23.1930x
234932X
231934x
234936X
234938X
234940x
231944X
234948X
231952X
234956X
231960X
234964X
130
110
150|| tt||160
170
189
190
20
220
240
260||tt| |280
300
320
104
109
114
124
134
144
155
165
175
186
196
207
227
247|| tt||269
289
310
330
1830
190
210
220||tt| |230
250
260
280
30m
320
360
380
- 120
10
D
140
145
150
165
180
190| |tt||210
220
230
250
260
280
300
320||tt ||360
380
420
440
JB/T6362.1995
表3（完）
in..| |tt||60
50
72
72
72
.
8
96||tt ||96
96
120
1201
1-4-1
14.4
G3
173| |tt||100
200
210
227
237
252
272
292||tt ||328
348
381
40.1
表149X系统
T
48
48||tt ||4.8
54
60
60
72
72
72
84
84
96
96
96
120
120
141
144
rd isma
126
131
136
150
163
173
190
200|| tt||210
227
237
252
272
292
328
848||tt| |384
404
R
15
18
18
18
21
21
24
21
21
30
30
36
36
3|| tt||12
12
12
13.5
15
15
18
18
18
21
21
24| |tt||24
24
30
30
36
36
注：此系列代号不间于JB/ T2974的结果，X运动内迈制作与49系纳不间。6 最作
最新在线：
电影开发234420/UF5
JB/T6362-1995
7 technology这样
7.1 公司公差按表5、表6的设计。520
30
30
36
3ti
36| |tt||12
12
S
18
60
60
72
2||tt ||2.1
2.1
24
27
30
30
36
36
36
42
12
18
48
18
60
GO
72| |tt||72
.
2
2
3
1
-
1. 5
1. 5
2
2
2
2
2
2
3
7| |tt||1
1
1
-
-
1
1
1||tt ||mm||hh||.||hh||. t
3.b
0.6
.6
1
1
1
1||tt| |运动
30
50
80
120
180
h/mm
250||tt| |315
到
30
50
80
120
180
250
315
400
da
上自看
表5
JB/T6362--1995
SP.UP级开合及长圈公差
SP级
s..s.
下自线
8
10
- 12
: 15
.-18
22
25
30
上偏药
.
2
13
.+ 3
1 4
5
:
下偏下
-- (
11
14
18
--21| |tt||26
303
35
ax
3
3
+
5||tt ||5
7
7
注：47系系和4-X系列按对版的44和9系系内很方法。 编
SP、UP级座圈公差
表6
D/mm
超送
30
50
80
120| |tt||150
180
250
315
400
500
7.2
求。|| tt||7.3
7.4
7.5
到
50
80
120
150||tt| |180
250
315
400
500
630
上自定
2
24
28
-33
33
-· 37
1
- 46
- 50|| tt||55
Anar
下偏萃
27
-33
38
--- 4 4||tt ||. 46
-52
tt||. 64
tt||77
下偏降| |tt||.10
i.
15
18
2
上佩差
S.ts||tt ||Tix
1.5
1.5
8
sp.up挌
比偏
简
：| |tt||2
：
15
下偏落
1r
rt
2
TE| |tt||图像采川7GCr15或电影脱气GCr15. Hot handling quality should be in line with JB1255中公差电影的4、2级图像的要国川的图像的微信的要来生电影电影手机。其全在在线由电影）设计时间电影。 电影成品电影电影由电影，海店电影电影。 SP、UP class 起集产品电视电油酸按GB307.3中可以4、2级工业的设计7.6
Bearings of G5 class above (含G5级) steel. 7.7
7.8
7.9
值按表7。 pre-loaded荷less than 2000N（公司2000N），值的：！m： more than 2O0N值的t1.5um。
521
8
内经化号
避
09
13
It
19
2.
09
13
t
19
24
26
34
40|| tt||56
68
80
1
195
190
490
49||tt| |785
785
980
1470
1470)
1960
1960
B/T6362||tt ||表7
2
196
295
685
980
980
1175||tt| |1470
1470
1960
1961
2450
2450
1995
辅承在设计荷表| |tt||图
295
490
980
1470
1470
1960
1960||tt ||1960
2450
2945
3435
3925
8.1 小明的5.,S。 言按图2.图3会生核电影，图2
8.2 可以的下载公差按图4电影的数机。图4
8.3 按7.1和7.The test load recommendations for method 2 are shown in Table 8. 522
contained
3
390
590
1175
1765|| tt||1765
2150
2150
2450
2945
3925
1905
5885||tt| |1.90
68
1375
2060
2160
29.45
2945
2945
3925
1905
5885
6865
Picture 3
590
833
1670
2· 450
2550
3.135
3925
3525
1905
5883
6865
7850| |tt||6
785
980
N
1960
2945
2945
4:115| |tt||1415
1905
5885
6865
7850
8830
over
over||tt ||30
50
80
120
180
315
i/mm
JB/T6362· .1995
Table 8 Measurement load table
to
30
50
80
120
180|| tt||315
100
Note: 47 series and 49-X series are searched according to the corresponding inner diameter of 44 series and 49 series. 8.4 The deformation deviation of preload is measured according to the method shown in Figure 5. Figure 5
8.5 The measurement methods of other tolerance items are in accordance with the provisions of GB307.2. Inspection and Packaging
9
9.1 Bearings should be 100% inspected.
9.2 After passing the inspection, a certificate of conformity will be issued according to the following content: a) Bearing code:
b) Technical standards director;
c) Tested bearing number; || tt | |150
200
250
300
4g=T --T:
f) amp, ompS, S actual measured values.
9.3 Qualified products are individually boxed after being cleaned to prevent traps. The bearing rings and rolling element components should be separated by pads. 523
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.