GB/T 15305.1-1994 Coated abrasives - Dimensions and tolerances of sheet-shaped abrasive cloth and sandpaper
Basic Information
Standard ID:
GB/T 15305.1-1994
Standard Name: Coated abrasives - Dimensions and tolerances of sheet-shaped abrasive cloth and sandpaper
Chinese Name:
涂附磨具 页状砂布砂纸 尺寸和公差
Standard category:National Standard (GB)
state:Abolished
Date of Release1994-01-02
Date of Implementation:1995-09-01
Date of Expiration:2005-12-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Cutting Tools>>25.100.70 Abrasives
Standard Classification Number:Machinery>>Process Equipment>>J43 Abrasives and Grinding Tools
Publication information
other information
Review date:2004-10-14
Drafting unit:Zhengzhou Abrasives and Grinding Research Institute
Introduction to standards:
GB/T 15305.1-1994 Coated abrasives - Dimensions and tolerances of sheet-shaped abrasive cloth and sandpaper GB/T15305.1-1994 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Coated abrasives Abrasive sheets---Dimenstonsand tolerances
This standard is equivalent to the international standard ISO2235-1993 Sheet abrasive sheets-Subject content and scope of application
This standard specifies the dimensions and tolerances of sheet abrasive sheets. This standard applies to sheet abrasive sheets for manual grinding. The dimensions and limit deviations of sheet abrasive sheets shall comply with the provisions in the following table. Width × length
230×280
115×280
115×140
140×230
93×230bzxZ.net
70×230
70×115
Additional remarks:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Standardization of Abrasives and Grinding Tools. This standard was drafted by the Zhengzhou Abrasives and Grinding Research Institute. Approved by the Guohao Technical Supervision Bureau on December 20, 1994 GB/T 15305.1—94
—Marking, dimensions and tolerances
Limit deviation (width or length)
1995209-01#苑
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.