GB/T 15247-1994 Quantitative analysis of carbon in carbon steel and low alloy steel by electron probe - Sensitivity curve method (calibration curve method)

Basic Information

Standard ID: GB/T 15247-1994

Standard Name: Quantitative analysis of carbon in carbon steel and low alloy steel by electron probe - Sensitivity curve method (calibration curve method)

Chinese Name: 碳钢和低合金钢中碳的电子探针的定量分析方法灵敏度曲线法(检量线法)

Standard category:National Standard (GB)

state:Abolished

Date of Release1994-10-17

Date of Implementation:1995-06-01

Date of Expiration:2009-04-01

standard classification number

Standard ICS number:Metrology and measurement, physical phenomena>>Optics and optical measurement>>17.180.30 Optical measuring instruments

Standard Classification Number:Instruments and meters>>Optical instruments>>N33 Electronic optics and other physical optics instruments

associated standards

alternative situation:Replaced by GB/T 15247-2008

Publication information

publishing house:China Standards Press

other information

Release date:1994-10-17

Review date:2004-10-14

Drafting unit:Central Iron and Steel Research Institute, Ministry of Metallurgy

Focal point unit:National Microbeam Analysis Standardization Technical Committee

Publishing department:State Bureau of Technical Supervision

competent authority:National Standardization Administration

Skip to download

Introduction to standards:

This standard specifies the electron probe quantitative analysis method for carbon in carbon steel and low alloy steel. It is suitable for a quantitative analysis method for carbon in carbon steel and low alloy steel using an electron probe spectrometer, and is also suitable for a scanning electron microscope with a spectrometer. GB/T 15247-1994 Electron probe quantitative analysis method for carbon in carbon steel and low alloy steel - Sensitivity curve method (calibration curve method) GB/T15247-1994 Standard download decompression password: www.bzxz.net