Standard ICS number:Paint and pigment industry >> 87.080 Ink, printing ink
Standard Classification Number:General>>Economy, Culture>>A17 Printing Technology
associated standards
Publication information
publishing house:China Standards Press
ISBN:155066.1-18923
Publication date:2003-01-01
other information
Release date:2002-06-13
Review date:2004-10-14
drafter:Wang Xiaoping, Liu Shubin, Wang Jingxian, Yan Yuhua, Gao Lisheng
Drafting unit:Ministry of Public Security Anti-counterfeiting Product Quality Supervision and Inspection Center, Beijing Zhongbiao Guoan Anti-counterfeiting Technology Company
Focal point unit:National Anti-Counterfeiting Standardization Technical Committee
Proposing unit:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
This standard specifies the terms, definitions and abbreviations, product classification, requirements, test methods, as well as marking, packaging, transportation and storage requirements for thermochromic anti-counterfeiting inks. This standard applies to thermochromic anti-counterfeiting inks for various printing plates. GB/T 18752-2002 Thermochromic anti-counterfeiting inks GB/T18752-2002 Standard download decompression password: www.bzxz.net
This standard specifies the terms, definitions and abbreviations, product classification, requirements, test methods, as well as marking, packaging, transportation and storage requirements for thermochromic anti-counterfeiting inks. This standard applies to thermochromic anti-counterfeiting inks for various printing plates.
Some standard content:
1CS 87. 080 National Standard of the People's Republic of China GB/T18752—2002 Heating color variable anti-counterfeiting printing ink 2002-06-13 Issued People's Republic of China General Administration of Quality Supervision, Inspection and Quarantine 2003-01-01 Implementation GB/T1B752—2002 Regulatory References Terms and Definitions Product Classification Test Method Marking, Packaging, Transportation and Storage TY KANTKA & GB/T18752—2002 This standard only specifies the quality requirements for the anti-counterfeiting characteristics of thermal color-changing anti-counterfeiting inks. Therefore, it needs to be used together with the relevant requirements (such as the reduction and display of various printing methods such as lithography, gravure printing, silk screen printing, etc.) during testing. This standard was proposed by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. This standard is under the jurisdiction of the National Anti-counterfeiting Technical Committee. The basic units of this standard are: the Anti-counterfeiting Product Quality Supervision and Inspection Center of the Ministry of Public Security, Beijing Zhongbiao Guoan Technology Co., Ltd., and the drafters of this standard are: Yu Xiaoping, Liu Shubin, Wang Shuzi, Yue Yuhua, Gao Lisheng GB/T18752—2002 Thermosensitive anti-counterfeiting ink is a new product in a series of anti-counterfeiting inks. This standard is formulated to standardize the product quality of thermal anti-counterfeiting inks and put forward the requirements for anti-counterfeiting characteristics, so as to facilitate future quality supervision. The applicable temperature range specified in this standard exceeds the appropriate temperature range of 330°C specified in TGB/T17004-1997. This standard describes the anti-counterfeiting properties of thermal sensitive anti-counterfeiting oil display and the characteristics of oil penetration as two parts, with the focus on the anti-counterfeiting properties of thermal sensitive anti-counterfeiting oil display. The requirements for the characteristics of the oil itself are not further specified because the characteristics of the oil itself can refer to the corresponding current national standards and inspection bases for the printed version. KAoNTKA& 1 ScopebzxZ.net Thermochromic anti-counterfeiting ink GB/T18752--2002 This standard specifies the terms, definitions and abbreviations, product classification, requirements, test methods, and marking, packaging, transportation and storage requirements of "Thermochromic anti-counterfeiting ink". This standard is applicable to all kinds of thermochromic anti-counterfeiting inks of different printing plates. 2 Normative references The following clauses become clauses of this standard through reference in this standard. For all referenced documents with a date of reference, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who have reached an agreement based on this standard shall study whether the latest versions of these documents can be used. For all undated references, the latest version shall apply. The new version is applicable to the following specifications. GB/T17001.1-199—Printing inks Part 1: Fluorescence emission (offset printing, letterpress printing) Specifications QB/359—Printing inks Product classification Nomenclature and serial numbers 3 Terms and definitions The following technical specifications and definitions apply to this standard. 3.1 Heating color variable anti-counterfeiting inks heating color variable anti-counterfeiting inks that can produce a changing effect when the overflow changes. 3.2 Reversible and irreversible thermal color variable anti-counterfeiting inks revereed and irreversed heating color variable anti-counterfeiting inks Iak When the humidity changes, the ink that can change color is reversible. On the contrary, it is irreversible. 4 Product classification 4.1 Products are classified according to the apparent color of the color change under natural light, the color before the heat-sensitive color change, and the reversible and irreversible properties. 4.2 Product classification method: Color after change Color before change Ink type (printing version) Thermochromic properties Thermochromic anti-counterfeiting ink (RM is the first letter of the pinyin of the word "thermosensitive") Note: Use the alphabet or the following letters to express it, 1 GB/18752-2002 Product type Table 1 is the first number system planning. Thermal change properties Talk about male god related (printing city) Oil surface color Table 1 Product model end puncture rule table Resistant thermal color change oil Unsuitable thermal color change oil According to the provisions of QB/T3ST Technical provisions of QB/T597 Health: RMt-P3-1 The product is a color-changing white flat printing reversible thermal color change oil, 5 requirements 5.1 The product's service item oil quality indicators must meet the corresponding non-printing version of the printing design certification standard technical requirements of the product's potential sensitivity oil requirements must meet the provisions of Table 2. 5.2 Table 2 Thermal color change anti-counterfeiting performance technical indicators Thermosensitive color change temperature (C:) Ethanol resistance Gasoline resistance Standard sample refers to the warranty sample produced by the same batch without environmental testing. 5.3 Thermal single color change anti-counterfeiting performance is determined in accordance with the requirements of Table 3 and Table 4. Standard +Standard oil sample Degradation 3 Irreversible thermal color change printing oil anti-counterfeiting performance determination method Small reversible color change under natural conditions || tt||Abstract has changed Discrimination shows change Course color is only state-owned crazy selection Comprehensive color is completely eliminated Table 4 can send heat-sensitive color change printing oil egg anti-counterfeiting performance grading method reversible heating before and after color change 5.4 Counterfeit special parts grading method Love before heating Effective big change Clear product change Color has changed Original color has no change Maintain the continuous stability of anti-counterfeiting characteristics and the internal safety level is divided into A,,,,E. 5.4.1 Maintain the continuous stability of anti-counterfeiting performance grading method see the current provisions of Table 5: 5, 4.2 European fast hair has doubtful methods than the provisions of Table 5 2 TY KAoNTKA&- Emotional safety Change Original color only retains the female frequency Color is completely lost 6 Test method Table 5 Maintaining the continuous qualitative characteristics of anti-power characteristics and anti-safety period pet sensitive method Maintaining the continuous qualitative characteristics of the injury characteristics 6.1 Detection of the quality of the oil display of the thermal color-changing anti-injury oil GH/T18752—2002 Fake safety period 1 yearTE year 6 months≤1 year months 1 monthT3 months ≤1 month The oil index of thermal color-changing anti-counterfeiting oil shall be tested according to the corresponding standard requirements of other versions of oil. 6.2 Thermal color temperature 6.2.1 Principle The thermal temperature of thermal color-changing anti-counterfeiting oil refers to the temperature at which the color of the oil changes under the change of temperature (i.e. the critical temperature of color change). 6.2.2 Instruments and materials (a) The temperature control box should be accurate to ±0.03°C); b) Ink knife; ) Non-fluorescent material. 6.2.3 Test steps 6.2.3.1 Place the heat-sensitive anti-counterfeiting oil on a flat paper or use a proofing machine to make a sample, place it at room temperature for 24 hours, dry it, and make four samples at the same time, one of which is used as a standard sample and stored at room temperature. 6.2.3.2 Place the sample in a heat-sensitive oven and heat it step by step (the heating intensity can be adjusted as needed). After the color changes, record the color change. 6.2.3.3 Make three parallel measurements and calculate the temperature deviation. 6.3 Ethanol resistance The ethanol resistance of heat-discoloring anti-counterfeiting oil shall be tested according to the requirements of 7.3 in GB/T17001.1:1997. 6.4 Gasoline resistance The gasoline resistance of heat-discoloring anti-counterfeiting oil shall be tested according to the requirements of 7.4 in GB17001.1:1997. 7. Packaging, storage and storage 7.1 Packaging 7.1.1 The packaging of letterpress and lithographic inks shall be in boxes or iron packaging, and then put into the outer packaging. 7.1.2 The packaging of gravure oil shall be in airtight packaging or plastic packaging, and then put into the outer packaging box. The packaging regulations for flammable goods shall be implemented according to 7.2 Storage requirements: From the date of production, the effective storage period is half a year. 7.2 Marking, transportation, storage The marking, transportation and storage of thermal color anti-counterfeiting oil shall comply with the requirements of Chapter 7 of G/T17007.1-1997. Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.