JB/T 6382.4-1992 Cone seal welding type cone thread 90. Elbow pipe joint
Basic Information
Standard ID:
JB/T 6382.4-1992
Standard Name: Cone seal welding type cone thread 90. Elbow pipe joint
Chinese Name:
锥密封焊接式锥螺纹90。弯管接头
Standard category:Machinery Industry Standard (JB)
state:Abolished
Date of Release1992-07-14
Date of Implementation:1993-07-01
Date of Expiration:2007-09-01
standard classification number
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:Mechanical Industry Press
other information
Focal point unit:Xi'an Heavy Machinery Research Institute
Introduction to standards:
This standard specifies the classification of cone-seal welded cone thread 90° elbow pipe fittings. JB/T 6382.4-1992 Cone-seal welded cone thread 90° elbow pipe fittings JB/T6382.4-1992 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
Cone-seal welded cone thread 90° elbow pipe joint subject content and scope of application
This standard specifies the classification of cone-seal welded cone thread 90° elbow pipe joints JB/T6382.4-92
This standard is applicable to cone-seal welded cone thread 90° elbow pipe joints in pipeline systems with oil and gas as the medium, with a nominal pressure PN≤16MPa and an operating temperature of -25~+80℃.
Cited standards
GB1414
GB2346
GB5865
Ordinary thread size series for pipe screw ends Hydraulic and pneumatic systems and components Nominal pressure series Lubrication systems and components Basic parameters
GB/T12716
560°conical pipe thread
JB/T6386Www.bzxZ.net
3Product classification
Technical conditions for cone seal welded pipe joints
The types and dimensions of cone seal welded cone thread 90°elbow pipe joints shall be as specified in the drawings and tables. S
Approved by the Ministry of Machinery and Electronics Industry on July 14, 1992, and implemented on July 1, 1993
Outer diameter of pipe
Marking method
Pipe joint
3.3 Marking example:
Z1 1/4
JB/T6382.4-92
JB/T6382.4
Standard No.
Outer diameter of pipe, mm
Product name
Outer diameter of pipe D. Cone seal welded type cone thread 90° elbow pipe joint with a diameter of 20mm: Pipe joint 20JB/T6382.4
Technical conditions
Technical conditions of cone seal welded type cone thread 90° elbow pipe joint shall comply with the provisions of JB/T6386. Additional Notes:
This standard was proposed and managed by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Xi'an Heavy Machinery Research Institute of the Ministry of Machinery and Electronics Industry. The main drafter of this standard was Zhao Hongzhang.
O-ring
11.2×1.8
11.8×2.65
23.6×2.65
36.5×2.65
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.