GB/T 15049.8-1996 CAD standard parts graphic file geometry and characteristics specification retaining ring GB/T15049.8-1996 standard download decompression password: www.bzxz.net

CS_35-240.50
National Standard of the People's Republic of China
GB/T15049. 3~15049.9—1996
CAD standard parts file-
Specification of geometry and characteristics
CAD standard parts file-
Specification of geometry and characteristics Parameters1996-10-23 Released
National Technical Supervision Bureau
1997-05-01 Implementation
GB/Jiang 15049.8-1996
During the original formulation of DNV11 series standards, due to the conversion mechanism, only some of its standards and similar standards were produced in text. The rest were directly developed as standard software. This prohibits us from setting the corresponding DNV11 standard as the basis when we are waiting for the standard. The compilation of the DINV11 series of standards that have been formed is based on the compilation of the national standards of China.
This standard does not follow the principle of the national standard system of DINV4021 series standards, and is compiled and formulated according to the specific situation of the national standards of my country. The technical contents of this standard such as "division, inspection, name and other technical contents are equivalent to DINV4UH1 series standards: the specific descriptions of this standard such as "property name, model characteristics table", "medical shape whole part", "pregnancy characteristics table" and so on are in full compliance with the relevant provisions of Chinese standards GB/T1C091.1 and 6/11505.1. The cloud series standards will be formulated and published in accordance with the planning of my country's national standardization main parts department. This combined volume consists of the following seven separate parts: GB/T0-9.3-1996 CAD standard parts drawing files geometry and characteristics specification (MIVTTNV4001-1e16:1937) GB/T15U44-3 CAD standard parts drawing files geometry and characteristics specification (AGVDLV4001-1902:1988) GB150-9.5-1996 (A1) standard parts drawing files geometry and characteristics specification (A14001-1996:201389) R/T15049.6-1996 CA standard parts drawing files geometry and characteristics specification (eqDIN 100:1996) 11:1992)
GB;T15049.7-1995CA[Standard parts - Shape and shape specification 4001.eil 2:1988)
GB/T1501S.R-.199iCAD elastic shape file - directional graphics and characteristics of screws (eqyDINV
GB: T15049.1_99SCA standard parts - Geometric shape and shape specification 4c0_. Teil 15, 1Ux8)
This standard is proposed and drafted by the China Institute of Standardization and Information Technology. The main authors of this standard are Tai Guangguo, Li Weilai, Hong Xue, and Bao Shenping. This standard is entrusted to the China Institute of Annotation and Information Classification and Coding. 156
National Standard of the People's Republic of China
CAD standard parts file-Specification of geometry and parameterization
CAD standard parts file-Specification of geometry and parameterization
1Scope
CB/T 15049-81995
This standard specifies the standard description of the G/T1CAD standard parts graphics series. This standard uses the preparation of the relevant files and 2D and S-sequential graphics programs related to the CAD product library to ensure the acquisition of complete standard support and its standard shape display. This standard is applicable to computer-aided design, computer management of products, etc. The production standard does not apply to the production and inspection of this standard part. 2 Reference standards
The following standards contain The provisions that constitute technical standards by reference in this standard are valid when this standard is issued. All standards will be revised: the parties to this standard should discuss the possibility of missing the latest versions of the following standards. GBT1001.1139 Definition and principle of standard table of things GB/T15049.1-94 General rules for the preparation of CAD standard parts 3 Product standards handled by GB8R366 Dimensional enclosure CB 884-86
Push the block
G885-86
Screw with lock
Shooting block
GB 891-86
Tan Ding tightening shaft end sex diagram
Deep inspection scene fixed shaft belt over diagram
GB 8S2.1-RS
A elastic finger wet A type
GB 694.=-86
Pull through the spring block
GS4.2-rail spring block diagram
8 hole wire retaining ring
GB SS5. :
6B855.2-3% Rail Pin Stop
696-86 Open Stop Drawing
G362: Steel Consumption Drawing
63560-According to the Appropriate Drawing
4 Characteristics
The characteristics and technical codes of this standard are in accordance with GE/110091.1 and GB/1501.: The principles of the regulations were approved by the State Administration of Technical Supervision on October 73, 1996 and implemented on May 1, 1997||tt ||4.1 Block characteristics name
Equal property name
Nominal point diameter (inner)
Public point diameter (diameter)
Study or wire point diameter
Table principle
Iron tight hole pad
Figure feeling
Lock diagram deepening
Locate pin hole diameter
Center hole diameter
Center hole diameter
Balance angle
4.2 Block characteristics table
GB/T 15049. 81996
Forget 1 shallow circle characteristic name
Character code
Center distance
Equivalent name
Through the radius
Working hole diameter
Working hole semi-light
Opening actual opening height
Head diameter
Head head
Only. Head
Center height or actual center distance
National front radius
Diameter setting
Matching parts 1
Difficult accessories 2
Matching parts 3
Matching parts 4
GB/T 15049. 8
Purchase with original specifications
5.1 Document inspection
G/T 15049.B—1996
KIA.L.ALS,AAB?
AA-2SAAL
KSA.S.AAA.AAB:AAC,AAD)
DAA-IAAG-AAF)Z2
KE(H,I'.E.AAE.AAF.AA.AAD)| |tt||K2(A.-AAA-AAH:
N4A.C.AAA:
AAAA)2
HB.E.AA:,AAJ.AAK.AAL.AAM.AAX.AAUr
KRB.L.AAF.AAH1
KIIB.L.AAL.AAJ.AAR.AAL.AAM.ALN.AAP.AAU.AAK)KRCAAN)
K11(ACAAA.AA J.AAK.AAL.AAM.AAV.AAP.AAO.AAK)AAA
EI3TA,C,AAN!
KI4A.L.AAA.AAK.AAN.AAS)
KI5IA.C.AAT:
5.2 Back-up Ring Thing Characteristics Table
ID.NN'GB AR3 S6'
I.NT. Pin collar retaining ring
GB/T 15049.8 --1996
KLGA.CD.AAN)
TT).NTH.VTE GR B83—86—$A.*ID.AD.1927.5,01
ID.VD,E81.1
m,FA,1CN400008R88 000GC5
ID.FD.2.1
GE,KI,RI-\DSKI\.
GE,FA,DRK1
GE.SM.D8K1'GB10091', 2
(Special transport items
MM,SM.-: 35,I,0.H
MM.SM... 20.E.0.J
MM.GM.-. 5O.-.1.AAA
6O.ELAAB
The number of students waiting to be born
79,1.1.CAA
,AAA,AAB
, Male ball diameter (diameter)
, material
, surface treatment"
, exterior color
, tight aperture"
shooting rate 1 (year GB117)
AAB CAA
.'di,'mn'
ZA,DA,1
GB/I 15049.8—1996
DA，1，10,1,8，10,20,3，3×12c
Item: "The first row of the holding item column\2A，DA， The third character of 1 is a numerical value, which corresponds to the number of rows of the specific data in the code. The more rows of data there are in the product, the less the bit is recovered, and only one bit is output. The first line of data in the transport product is used as a sample, so the verification item number starts with T, next company.
11.NN.'GB 854 - B6'
IDT, block||tt ||1N.H,INB\File Map GB 884—86—$Am,4,1997.06.01
ID, VD,$50619.1
T,FA,1,CN40000888ED3000Y
GE.KT.KT=DRK2\
GE.PA.DR2A
GE.SM,K2,GBiC3911
Special column description
MM,SM,1,4G.1.0,J
MM.GM.1,5o,IIAAA
60.1.1AAB||tt ||MIM.FM.1.
.IICAA
C Persistent Data Items
ZA,DAI
DA,,IU,1,
“Nominal diameter (inner diameter
original standard”
material”
“Tai Er treatment| |tt||, outer diameter"
, feeding hole diameter
, matching parts 1 (cover nail GB7
AAB CAA
,do\,'mm| |tt||ID,NN,'GB 8856
, Locking ring with locking ring
GB/T 15C49. 8—1996
ID.NB.Nn=\ GH 88=—86—SA.\T.AD,1987.06.01
ID,VD,950318,1
D,FA:1,CN40000EBBS 00000r
ID.FD.2.1
GE,KT,KT=TD8K3\
GE,PA,DSK3,A
GE.SM,DRK3.GBiSa',
AAA,AAB,AAC,AAD
VI+DA.A ,13 ,C .12 .AAA .13 .AAB,12 AAC ,F3.1,AAD ,F3.1CAA .A6 ,CAB.13c
Mental persistence description items
7A,MM,Jn
13+1,0,
50,1.-.AAA||tt| |MM,FM ,I:
70.1..AAC
B0,1,1.AAD
SC.1:1,CAA
JCa.1.I.GAR|| tt||C Special data items: AEIUNR, A, 1, nominal diameter (inner diameter), surface treatment, outer diameter ||, tight hole
, burning round finger spot
, deep"
matching parts 1GB
matching parts 2 iron wine GB921)
I 'aor,'mm'
JD.NN.GN886—86
Heart N auxiliary shoulder block diagram
CE/T15049-8—1996
IED.NB. NB-\shoot EGR886-8-A.\! ID.AD.19E7.06.
D.VD.SSCR:A.1
ID.FA:1,'CN400008888030000
GE,KT.KT-\DRK4\| |tt||CE,PA.D8K4| |tt||GE,SM.DaK4,GB1UU9I1
VI,DA,A
C. Persistence description item
ZA,MM,6
M.SM ,1.
FO,I.1.AAA
Central characteristic number!
GC.1.1,CAA
INR FAA
ZA,DA,1
，male ring diameter (inner diameter)
，surface texture"|| tt||Matching parts 1 (shoulder)
C AAA CAA
130，4,35,32
ID,NN,GB R21-86
'd 'mem?
I''mm*Www.bzxZ.net
GB/T 15049.8—7996
N.Screw lamp fastening mail cat face
TD.NB,'TF( E.NE. 0. 0)NB-\File map GB S186$ B.\ID,NR,IF (F. EQ. ​​UU)NB=\File display GB 85i—85—B$B. *1[D.AD.1SE7.05.0]
ID,VD,S5815,1
ID,FA.1'CN400008888UEUJUO
GE,ET+TF(E.NE. 0.0)KT=\DEK5*GE.KT,IF(E.EQ.0.UKT ='D8Kf\
GE.A.DRKSE.CEAAE
GE,PA,DBKS,BC
GF.SM.DSK,'GB:0391'.1||tt| |GE.SM,DKS,GHIOI',1
C characteristics describe this
.AAH +F3.1 .CAA I2
20.1.1 heart
MM,GM,I,
6J.1.1,AAE
MMGMI:
MM+FM+1,| |tt||Gate characteristic data items
73,1,J.AAF
B0.1,1,AAG
30,1.1.AAH
InO,IICAA
110.1-1,CAR
120.1.-.CAC| |tt||Nominal diameter (rural diameter)
, flow distance
"surface treatment"
, positioning pin hole diameter
"center hole diameter"| |tt||, constant angle diameter of center hole
, matching part 1 (shaft diameter ≤=)
, matching part 2 screw GB819)
matching part (pin G119)
，AAF
，'mm
'errm'
'di''nrn'
,'D'mm'
AAC AAH CAA LAB CAL
AE IDNR FA
BCEAAE
ZA,DA,I
TA2X10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.