This standard applies to machine-blown glasses for holding beverages, but not to goblets or deep-cut glasses. QB/T 3558-1999 Machine-blown glasses QB/T3558-1999 Standard download decompression password: www.bzxz.net

Classification number: Y22
Light Industry Standard of the People's Republic of China
QB/T3558-1999
Represented by ZB/TY 22H-1986
Machine Blown Glass Cup
Published on April 21, 1999
Published by the State Bureau of Light Industry
Implemented on April 21, 1999
QB/T3558--1999
The technical standard is the original professional standard ZB/TY22001-1986 Machine Blown Glass Cup, which was converted to QB/T3558-1999 through the publication of Document No. [1999] 112 of the Light Industry Administration, and the internal standard remains unchanged. The standard is proposed by the Industry Management Department of the State Bureau of Light Industry. This standard is issued by the National Center for Standardization of Fireworks. This standard was drafted by Haibo Glass Products Co., Ltd. The main authors of this standard are: Han Peihua, Wu Saiding, Yao Guanling, Cha Zhisong, Xie Pianpan. This standard is based on the original light industry standard 2/TY22001-1% machine-blown glass issued by the Ministry of Light Industry.
Light Industry Standard of the People's Republic of China
Machine-blown glass cups
This standard applies to machine-blown cups for beverages, not to goblets and deep cups. Classification
! .! According to the variety, it is divided into two types: machine-blown cups and machine-blown or thick-bottomed cups. 1.2 The capacity is divided into three categories: less than 142mL, 142mL~284mL and less than 284mL. 2 Technical requirements
Specifications Capacity tolerances should be in accordance with Table 1 and Table 2. 1
Top H name
Standard
Specification
Cup
Pressure
Pressure name
142 mL
≤142ml
Method: Machine cough search bottom Huai Jing An said to choose the public base towel according to the response of both parties. 22
Physical and chemical properties should comply with the provisions of Table 3.
Project name
Thermal color change performance
Sweet water performance
2.3 External quality early in accordance with Table 4 implementation,
State Light Industry Bureau 1999-04-21 approved
Machine blown cup
Recall the thick bottom cup
142 ml ~284 rnl.
142 ml--284mil
QB/T3558-1999
Generation ZBT22001-19B6
Not more than 0.5mgNa,0/gx
Light and natural not more than 1250m
Optical path difference not more than 1550m
1999-4-21Implementation
Item name
Two-safety
How low is the cup
Not ()
QH/T3558-1999
Length 21mm~4.0mm, not popular 2.0mm is not much (^)
K degree, 1. 1 mm--z. 0mm
Descending gas dry
Length standard 0.5mm--1.0mm
Length less than 0.5m dense
*(pieces)
ten (pieces)
distance from the standard 1 length is less than 0.8mm
no more than ten)
length less than 1.0mm is less than (pieces! Length less than 1.0mm
Length less than 1.5mm
tooth more than half
K difference is -0. The 5mm
controller can be within
mm from your mouth
and the 300mm daily double
machine can be at the bottom of your
no more than {pieces)
no more than (pieces)
1 more!
Size (mm)
Not less than (m)
Not less than (mm)
Not less than (mm)
Not less than (mm)
Not less than (mm)
Not less than (mm)
Not less than (mm)1.1 mm~1.4 mm
Not less than (mm)
Cup mouth height 1.5mm~2.0 mm
Not less than (mm)
Cup mouth height 2.0 mm not higher than (mm)Double wine head
Drip head
TYKoN KAa
142 ml,--2B4ml
no obvious silk
not allowed
you can have
this is allowed
this is allowed
not allowed
not allowed
>284mL
item name
handling ball codebzxZ.net
my gas pool
normal period difference
exceeding error
change against this support
obvious
change, hair, my block
normal!
QB/T3 558—1999
轰4 (Continued)
国吹原送不系你底人于0mm机收怀。 Note 2: The number of small bubbles in the small generation is relatively small. 3 Detection method
1-2mL--29ml
Not evaluated
>284mL
According to the Q3/T3561-1999 wave elimination cup inspection period method (i.e. the original 2B/1Y22004-1986 return glass cup inspection method).
4 Acceptance rules
4.1 Delivery within a time 4.2 Take 100 pieces of each batch of products for quality inspection. If the inspection rate exceeds 7%, take additional pieces for inspection. If the product still does not meet the requirements, the product will be reported for inspection. Only qualified products will be selected (re-inspection rate calculation formula:
first board inspection + 100 pieces
second inspection + 100 pieces
x 1003%)
4.3 Take 100 pieces of each batch of products for quality inspection. If the quality is not met, take additional pieces for inspection. Let the customer test, if the test is still unsatisfactory, the batch of products is unqualified. 4.4 Each batch of products is tested for water resistance, if it is unqualified, the batch is unqualified. 5 Packaging and marking
51 The goods are packed in the same way as the specified number, and the label and the cup are used to avoid contact between the two: 5.2 Marking
5. The packaging must also indicate: the manufacturer's or other country's name, product name, patent number, format, number, weight, size, packaging specifications, and the two ends of the outer packaging should have "discrimination" and "caution" marks that are not easy to be removed. According to the requirements of the goods, the outer side of the inner packaging box shall be marked with: product name, model. 6.1 Transportation 8.1. Prevent moisture and strong vibration during transportation. It is forbidden to put similar materials together. It is strictly forbidden to contact with oxidants. 1.2 When transporting, the box should be placed in the main position, and the colored label should be exposed. Pay attention to light handling. 6.2 Storage in the warehouse must be a certain distance from the ground, pay attention to dry wind, and the stacking height should be in accordance with the regulations. Note: The shelf life is not less than half a year. The specific shelf life shall be agreed upon by the local factories. YKoNrKAa
A1 White lamp
Bright material cup colorless avoidance period.
42 Transparent pimple
Uneven vitreous body:
A3 Miscellaneous particles
Opaque and shaped debris.
A4 Cup mouth
QB/T 3559-1999
Appendix A
(Supplement)
Product disease term explanation
The cup mouth is not round, the difference between its maximum diameter and minimum diameter. A5 Cup height is low
Only the difference between the highest and lowest parts of the cup body, A6 Cup mouth thickness difference
: Only the difference between the cup body at the top and the bottom. 47 Thickness difference of cup bottom
“The difference between the bottom of the cup and the bottom of the cup. A8 Dripping head
Cup [1 Sleeping water shape
A9 Wave mouth
Cup! Uneven, wavy:
AO mold printing
The imprint of the record pattern in the cup body.
411 Pull mouth
The mouth produced by the joint mouth process. 412 Rubbing
The cups are worn together, leaving a lusterless edge on the cup body, scratches
QB/T355a.-1999
The wound left by the collision between the cup and the cup.B
YKoNKAa
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.