GB/T 15531-1995 Belt drive pulley center distance adjustment limit values

Basic Information

Standard ID: GB/T 15531-1995

Standard Name: Belt drive pulley center distance adjustment limit values

Chinese Name: 带传动带轮中心距调整极限值

Standard category:National Standard (GB)

state:Abolished

Date of Release1995-04-02

Date of Implementation:1996-01-01

Date of Expiration:2009-03-01

standard classification number

Standard ICS number:Mechanical systems and general parts>>Flexible transmission and conveying>>21.220.10 Belt transmission and its parts

Standard Classification Number:Machinery>>General Parts>>J18 Chain Drive, Belt Drive and Key Connection

associated standards

alternative situation:Replaced by GB/T 15531-2008

Procurement status:＝ISO 155-89

Publication information

publishing house:China Standards Press

other information

Release date:1995-04-02

Review date:2004-10-14

Drafting unit:Standardization Institute of the Ministry of Machinery Industry

Focal point unit:China Machinery Industry Federation

Publishing department:State Bureau of Technical Supervision

competent authority:China Machinery Industry Federation

Skip to download

Introduction to standards:

This standard specifies the adjustment limit values of the center distance between two transmission pulleys. This standard applies to the determination of the adjustment limit values of the center distance between the following two transmission pulleys: a. Crowned pulleys for flat belts; b. Pulleys for single V-belts, multiple V-belts or combined V-belts; c. Pulleys for synchronous belts (trapezoidal teeth). GB/T 15531-1995 Adjustment limit values of the center distance between belt drive pulleys GB/T15531-1995 Standard download decompression password: www.bzxz.net