This standard is formulated for the first time. This standard specifies the test equipment, sample pretreatment, sample quantity, test steps and test report for the drop test of large packages of dangerous goods. This standard is applicable to the drop test of large packages of dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. Its relevant technical content is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21584-2008 Drop test method for large packages of dangerous goods GB/T21584-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the test equipment, sample pretreatment, sample quantity, test steps and test report for the drop test of large packages of dangerous goods. This standard is applicable to the drop test of large packages of dangerous goods. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and is not equivalent to it. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations", and the degree of consistency is not equivalent. The relevant technical contents are completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard: Lv Gang, Wang Libing, Zhao Lihua, Xu Chuanlai, Wang Xiaobing, Li Xueyang.
This standard is formulated for the first time.
GB/T4122.1 Fundamentals of packaging terminology
GB/T4857.5 Drop test method for packaging for transport (GB/T4857.5-1992, eqvISO2248:1985)
GB19270.1 General safety rules for inspection of dangerous goods packages for water transport
GB19432.1 General safety rules for inspection of large packages of dangerous goods

1S 13.300
.. . ..
National Standard of the People's Republic of China
G8/T 21584---2008
Dangerous Goods
Drop Test Method for Large Package
Daattots ods-Test method for drop f large package2008-04-01Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Administration of Standardization of the People's Republic of China
2008-09-01Practical
321584-200a
This standard specifies the construction specification template for the transportation of slightly dangerous goods, and the technical content is almost completely consistent with the above, and the standard text format is modified according to the price of 8/? 1.120. This standard is formulated for the European Union. www.bzxz.net
Drop test method for large dangerous packages
/2*5B8.--2#8
This standard specifies the test quantity, test collection and test method for large dangerous packages. This standard also includes the normative reference documents for the test of large dangerous goods.
The following are the only terms and conditions of this standard: you can order (not including the customers)! Please consult this document for the new version of GB/T4122u American terminology GBT A857 shipping documents G3 14270. GB1132 risk of physical damage GB/T412 packaging 1CE19432 hree peckauiags 4001 area or volume over the item storage documents belonging to the period of learning, its use of all previous interesting, knock the silver according to the agreement of the preparation of the new version of the new management of love 7. 5---1002.e41 130 2218:1985) Inspection safety regulations
sales teaching
health design mechanical method packaging, its cold and hot children's whole process refers to the external release of the explosive components, packaging active heat open closed stomach basket air 3.3
maximum permissible quality
mutna perapissthie gross mass magic body and actual auxiliary equipment and structure of the quality of the clothing you still wear quality (except for tea collection version of the open type of packaging)
joint drop test
standard capital·propose material: sea chemical capital
drop the packaged product from a specified height to a fixed level, to assess the packaged product's ability to withstand the test and the protection of the internal teaching,
avoid falling away from the distance irop heigh,
Sugar Ya equipment releases when the test is close to the lowest point of the platform and away from it, 4 test equipment is the whole
Joint test equipment selection will be 0B:T457.5 provisions G3/T 21584-2008
Xie Shi Ming is not a horizontal surface when the test does not move, and the court requires: the whole according to the known properties of the test product
love is the biggest of our rights, in order to ensure that the test sample is completely dropped to the platform before shooting: in the second formation of the platform, the horizontal height of the two points is difficult to exceed the difficulty of the good effect of the control you do not exceed 1! m4. 2 The lifting device
In case of doubt or drop in the waist, the original lock test sample is not damaged, 4.3 The radiant device
Your whole test group product practice is carried out, the test details are not healthy, the three girls are all children, and the cost information is guaranteed. 5 Test steps
5.1 Sample preparation
51, #For the large comfortable equipment provided by the operator, the new quality and materials should be observed, and the test should be carried out according to the requirements. The length of the child's body should not be lower than the maximum length of the child's body, and the face of the person should not be slightly larger than the maximum length of the person's body. 5.1. The good large packaging will be mentioned as an example of liquid and sharing. The blue body will be evaluated on the test urine. 5. 1.3 The inner packaging will be stored in the teaching materials according to the text. In order to find other objects that fall, this low micro-test shall not make the test invalid. You still use other sweet items you want to put in the inner packaging. The selected inner packaging and items have certain material characteristics (such as photo, etc.). 5. 1.4 The full evaluation uses additives, such as lead. In order to achieve the total rat-repellent effect of the whole package, the best way to do this is to minimize the impact on the whole package. 1. The large package has a large adhesive coating on the outside of the bag. You can consider the strict design of the outer bag to reduce the intake of the items. In the test sequence, the test column and the inner health are the most reduced or the city is beautiful. The fruit has the most happiness and joy of avoiding the particle intake. The pre-temperature flow treatment tight fittings can be considered. 5.1.6 The test wave body should be kept liquid, and if necessary, the swimming bed agent can be added. 5,? Turn the manned waist in the light solution environment and the corresponding environment with the release volume to 2 plans, select the good environment course magic 23120 and the relative explosion degree 012 or send heat: degree % + 2 agent relative degree is ± 2 road source degree 27 = 2 and the relative time intensity 86 times out of 2% according to the Yin complex on the whole light may be strong for the development of health is the home of the promotion of the period of technical assistance, point its level and value to make the speed limit on the bar within: the correct test risk reduction should be taken care of the wash shadow chrysanthemum.
5.2 Sample number exposure
Dangerous awakening group joint war test sample quantity is 5. 3 drop core degree
, 3 Lin free degree of injustice package 1
assistant! Joint drop height
packaging case!
Note: T, the packaging is carried out according to the a cavity 2 ℃.
The packaging is selected according to the a cavity 2 ℃.
5.3.2 The large packaging of the simulated sugar is selected, and the relative density and maturity of this material are replaced by another material. It is best to use water to reduce the density of the selected material () not more than 1. , drop height read the table! ! GB/1 21584---2006
If the relative density of stolen goods is calculated according to Table 2 (please add the fifth decimal place) to calculate the distance between the goods and the children
, 0, H-type bags are G1370.
5.4 Test points
Extremely nourishing
Ancestor teaching clothes
Single dumpling In order to ensure the quality of the packaging, the bottom of the packaging should be hard, inelastic, smooth, flat and flat to ensure the easiest place for the person to take photos. The name of the test sample, the number of questions, the name of the enterprise, the test time, the source of the test conditions and the handling time of the test equipment. The low density observed in the test can help explain the phenomenon of the test: the test method used is consistent with the technical standard: "test group period, test person signature test method, F GB/T 21584-2008 CIMC People's Vegetable and Garden Chuangjia Standard Hui Hsiao ... 8008
Xuechang Hall Publishing House issued by the respectful
Beijing Fuwai Sanxiebei #15
Number code: 10004:
Domain se.ec
Tel: 8332394668517548
China Standard Design Service Confidential Service Management
New Research Hot
No 80×3 2301/15 4.6 characters 7 characters 2% August edition
year # use you
number: 15508 number: 1-31840 set meal 12.00 yuan like bone print packing # can our company distribution center exchange
copyright special ointment slow rights will be investigated
report phone: (010168533533
800778517
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.