GB/T 5008 This part specifies the specifications, dimensions, terminal positions, etc. of lead-acid batteries for starting. This part applies to exhaust (liquid-flooded) lead-acid batteries and valve-controlled (with gas recombination function) batteries with a rated voltage of 12V for starting, ignition and lighting of various automobiles, tractors and other internal combustion engines. This part does not apply to batteries used for other purposes, such as: batteries for starting railway internal combustion engines. GB/T 5008.2-2005 Product Varieties and Specifications of Lead-acid Batteries for Starting GB/T5008.2-2005 Standard Download Decompression Password: www.bzxz.net

ICS 29.220.20
National Standard of the People's Republic of China
GB/T5008.2—2005
Generation (T/8.2)
Lead-acid starter haiteriey--Kinds of products and specifications2005-01-18Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2005-08-01Implementation
CB/T 50C8.22005
Hot use document
Gong Zhongzheng model
Battery specification and shape
Battery book method
([3T59086 starting equipment carrier battery is divided into three parts: the first part: starting body carrier battery technical specifications: the second part: starting piece acid steam electric diagnosis strict 5 varieties and specifications: the third part, starting or H-salt acid electric injection Rui ten small and marked as the second part,
part and /,—: compared with the above changes,
appropriate weight range has a change:
CB/T 5006.2--2305
In addition to the color of the battery type and the storage service of the maximum 20% customer use of the system 1EC600S5:233 starting book acid battery part: beautiful requirements and test methods for compensation points:
This part is based on the actual mouth of the mouth · generation extraction 3［>8.21s91.
This part is proposed by the China Electrical Equipment Industry Association. This part is issued by the National Decoration Government Storage Battery Standardization Technical Conference. This part of the flow of the flow of the power saving fence Shenzhen Institute of Science and Technology
This part of the flow of the flow of the flow: Institute of Jingping.bzxZ.net
This part of the first standard is the internal revision of the exchange of feelings: -G/T 0308.7198:CR/T ECC8.219911 Model
Starting lead-acid battery
Product variety and specifications
G/T(H)R This part specifies the specifications of the starting lead-acid battery, the size, terminal position, etc. GB/T5008.2-2005
This part is applicable to exhaust (sound-sensitive) lead-acid batteries (hereinafter referred to as electrostatic batteries) and control (with gas-controlled function) type batteries with a rated voltage of 12V, for starting, ignition and lighting of various vehicles, control engines and their low-voltage internal combustion engines. This part is not used for other purposes. Battery for starting internal combustion engines. 2 Normative references Documents
The following minor clauses are applicable to the authors of this part: All referenced documents shall not be used for any subsequent revisions (excluding the revised version) of this part; however, the parties to this part may use the latest versions of these documents. All referenced documents with different dates are applicable to this part: JB25 Heating and Steaming Self-Battery Product Model 5
3 General Battery Model
General Battery Model shall comply with the provisions of JB25S9 standard, and the battery specifications and dimensions shall comply with the provisions of Table 4. The diameter of the plastic shield shall comply with the provisions of Table 3: The plastic shield shall comply with the provisions of Table 3. Table 1
Leakage voltage industry:
2h rate expected reverse customer volume:
Supply capacity
(gas type)
Electric property!
Outline size/
:B/T 50DS.2-2005
Predetermined voltage
: Clothing small size Internal size: Look at the battery and fixed moon jade with grapes?
Xinshan Lake
175:862
With dynamic 4, system [,
Maximum size/:u
Maximum size mm
5 Terminal position
s. Terminal position center type as a~d):
52 Terminal with the same specification method of the selected Sichuan only use the factory name battery
Figure 2 above specification
National 3 solid
Ceramic 4 type specification
CB/15008.2--2305
Half estimate for the whole
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.