Some standard content:
1Cs 59.145. 35
Classification number: Y48
Reservation number: 157342C05
Light Industry Standard of the People's Republic of China
0B/T1616-—2005
Replacement of QB1616—1992
Sports glovesbzxz.net
Sports glovc
2005-03-19 Release
National Development and Reform Commission of the People's Republic of China 2005-09-01 Implementation
This standard is a revision of QB/T1616-1992 sports gloves. This standard is related to QBT16161992, and its main features are as follows: it clarifies the national standards, defines "not suitable for professional sports suits with special requirements for certain types of materials", introduces "flat leather", and stipulates the leather raw materials in the requirements: it adds stitch length and body length requirements, and makes changes to the original requirements; it adds "individual quality standards" for factory inspection:
QB/T1616-2005
一… In order to meet the requirements of my country's market economy and regulate the product market, it refines the type inspection requirements and divides them into "routine type inspection" and "special type inspection": in the batch determination regulations of type inspection, it strictly stipulates the quality standards for re-inspection, and refines the markings and labels, packaging, transportation and storage; it adds Appendix A "Special type inspection" "Appendix A of this standard is a protective appendix.
This standard is the China Light Industry Federation. 1. National Standard Promotion Technical Committee (SAC/TC252) National Standard Technical Committee Secretariat of the National Standardization Technical Committee, the National Standardization Technical Committee. Drafting persons: Zhao Yeping, Li Ma, He Mingdang: This standard was first issued in November 1992. This is the first revision of this standard since its implementation. It represents the light industry standard B/T1616-1992 issued by the Ministry of Light Industry. 1 Scope
Sports gloves
QB/T1616-2005
This standard defines the classification, requirements, test force method, air inspection process, inspection, packaging, transportation, etc. of sports gloves. Storage. Standard application - usually in motion.
Wood standards are not suitable for special uses and requirements of professional sports. 2 Normative referenced documents
The following documents are not referenced by the wood standard and become the subject of the wood standard. It is a referenced document, and all subsequent revisions (excluding the period) or revised versions are not applicable to this standard. However, the parties involved in this standard should consider whether the latest versions of these documents can be used. For referenced documents without a period, the latest version is applicable to this standard. Q/T2704-For use with safety
QB, T271 Physical and mechanical test of leather for determination of natural knives: double secretion period 3 Classification
3.1 According to the selection process, it is divided into visible type and required type 3.2 Nuclear materials are divided into natural leather, artificial leather, combined year, textile 3.3 According to the shape of the product, it is divided into type:
4 Requirements
4.1 Specifications
Type should comply with the specifications of Table 1 and Table 2: Bow-shaped gloves Specifications and allowable size deviations (I) The middle position is the main position.
Design Institute
Local allowable size deviation
QB/T1616-2005
2 Bow-shaped gloves Specifications and allowable size deviations (I) Type
When the type is light, the allowable size should be derived from Table 3 and Table 4.725
Straight gloves Specifications and allowable size deviations () Table 3
4.2 Materials
4.2.1 Leather raw materials
Select according to the provisions of QB/T2704. 4.2.1.1 Leather thickness not less than 0.45mm 4.2.1.2 Section surface suitable for type gloves specifications and allowable size deviation (a) type single groove crown 3 steam difference The difference is required for the customer to determine the production difference for the unit of gross meter. The product parts are smooth and clean, consistent, without transmission of the main parts, no obvious small part of the price, slight price residue, etc. Real bag surface, crack rolling, single pulp phenomenon: color parts are all hooked, no joint production, 4. 2.1.3 leather body
soft, elastic, comfortable to touch, 4. 2. 1. 4 although early
no oil, the allowable internal knife depth is less than one-third of the good hall, but it must be filled. 1 2. 1. 5 incision
forehead color hair surface color parts are basically consistent,
4.2.1.6 to the left of the two sets of the appearance of the state. 4. 2. 2 scum leather. Synthetic leather raw materials
QB/T1616-2005
Selected according to relevant standards, soft and sturdy, surface and base materials are changed, the outer layer is not sensitive, and the surface has left spots. 4.2.3 Fabrics of medical textiles
Weight: one, warp needle sand weave, tight elasticity: sand jumping, no silk 4.3 Accessories
4. 3. 1 Lining material
Long, wide, elastic and correct, comfortable, full of air, can be dense with fabric, half-whole white without twisting this sensitive help:
4.32 Zipper
Heart, hold teeth, pull together smoothly.
4.3.3 Buttons and other accessories
Real installation, make it visible, no hair: large rust: the same special installation department price place, caused by. 4. 3. 4 Logo
External method, whole, installation, flat, firm. 4.1 Mandatory requirements
4.4.1 Wall appearance
After the top tile, the uniform, neat, bottom, buttocks membrane, stitching smooth without wrinkles, heavy line one stitch code. 4. 4. 2 Needle spacing
thread 1 certificate 12/30mm~15 needles/30mm, thread-=5 needles/30mmm-17 years/30mm4.4.3 Five fingers
finger measurement. Flat style less than 30~
4.4.4 Mouth
width "evenly arranged, symmetrical
4.5 Overall appearance
style, tightness ratio, thread head arrangement, whole without buckle, flow, uniformity, zipper head purchase secret, strict inspection and taste, etc.
5 Test force method
5.1 Device
, small 0.5
5.2 Specification
English hand row, Zhou Gongmai value 0.5mm steel plate ruler method test room, product width, use the measuring plate under the pressure of the set, through the book containing medicine structure: finished product main parts measurement diagram see Figure, Figure 23
QB/T1616—2005
Figure 1 Bow type gloves main parts measurement diagram
Figure 2 Straight type gloves main parts measurement diagram 5.3 Raw materials
Standard station, before production, inspection, finished products only confirm the appearance. 5.4 Stitch length
Score within .5 of the steel core six in the main position of the test 5.5 requirements of the other items
test, sensory and a ruler test.
6 Inspection rules
6.1 Group batch
QB/T1813-2005
Use the same raw materials as the center: a product produced by the same production process is grouped into one inspection batch or one inspection batch B.2 Factory inspection
6.2.1 The product is inspected before delivery. After passing the inspection, there is no mark (or control mark) on the product! 6.2.2 Inspection items
Specification, early, distance, appearance, etc. 6.2.3 Inspection content and
quality are inspected in reverse order, and the quality, thickness and epidemic prevention are not grouped for state inspection. Each batch has 3 inspections. 6. 2, 4 Qualification judgment
6.2.4.1 Single-piece judgment rules
If there is one item that does not meet the general standard, the original product will be unqualified. In addition, the product will not pass the quality inspection.
6.2.4.2 Batch judgment rules
If there are ten special inspection and supervision personnel (such as ten different inspection and supervision personnel), the batch of products will be judged to be qualified. 6.3 Special type inspection
According to the regulations of the purchase.
6.4 Conventional type inspection
[One of the circumstances, the company that should conduct type inspection) product structure, process, building materials, production version changes: b, strict product long brush production (six above) and national quality technical supervision agency to conduct type inspection fee requirements: stop routine production, each square at least escape type inspection. 6.4.1 Sampling quantity
The product quality of the factory inspection table is compared, [the following is required: 1 pair per case: 64.2 Qualification determination
6.4.2.1. The single pair of judgment standards is just
standards, and there is an unfair trap in the degree and distance standard: this product is unqualified. Dam collapse, degree, correct scanning all the standards, other indicators are not qualified for more than three of the top indicators, then the product is not qualified. 6.4.2.2 Batch demarcation rules
Involving testing, it is called qualified production, 9% and above), then the batch of products will be judged as: the qualified rate does not reach %, the re-inspection qualified rate reaches 5 years (and above), the batch production qualified: 6
QB/T1616—2005
For marking, labeling, packaging, transportation, storage 7.1 Marking
7.1. The qualified products have the following marks: Product certificate (or inspection 7.1.2 The product name, product number, color, quantity, material, standard number, and ex-factory date shall be indicated on the packaging. 7.2 Labels
Product labels shall include the following: product name, standard number, product number, material (fabric, lining, qualified inspection mark) and product unit (sales order). 7.3 Packaging
1.3.1 Each set is firmly connected to the bottom set, and the lining between the sets is clear. 7.3.2 The inner packaging is packed in paper boxes or paper bags. The box type is the same as the box type. 3.3 The outer packaging is made of perforated cartons. The carton should be lined with oil paper, and the outside of the box should be sealed and tied with material packing tape. 7. 4 Transportation, storage
During transportation and storage, the product should be protected from sunlight and rain, and should be kept away from high temperature environments. It should be well ventilated and dry, mosquito-proof and moisture-proof. It should be kept away from chemicals, and should avoid liquefied substances and sharp objects. 6
A.1 Applicable scope
National emergency inspection and quality inspection.
A.2 Requirements
Appendix A
(Normative Appendix)
Special type inspection
Basis of the standard type inspection 1: It should comply with the provisions of Table A. Table A. 1
Leather tear strength/N
Q/T1616-2005
Note: The tear test piece is directly sampled from the delivery set, and the sample is collected from the leather sample supplied by the company and the returned sample cabinet. The sample should be in accordance with the certification of 270.
A.3 Test method
According to the provisions of 27, take samples from the leather sample supplied by the company or from the palm (or back of the hand) vertically, take samples from each, and check with QH/T2711. The average value is taken: A.4 Judgment
Leather tear strength index is unqualified, that is, the product is judged to be unqualified.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.