This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of patchouli oil. This standard applies to patchouli oil. QB/T 2522-2001 Patchouli Oil QB/T2522-2001 Standard download decompression password: www.bzxz.net

Classification number Y41
Purchase number 9479~9482—2001
Light industry standard of the People's Republic of China
QB/T 2519~-2522—2001
Standard for spices
Allyl acetate
Linalyl acetate
Spearmint oil Patchouli oil
2001-11-15 Issued
China Light Industry Federation
2002-05-01 Implementation
QB/T2522—2001
Alternative number: 9482—2001
Patchwork standard: original national standard GB11535—1989, revised on the basis of the original national standard GB11535—1989 (issued by the National Light Industry Standard No. 1112, the content of which is the same as before). This standard adopts 1503757:978. Standard technical index [03757:1978 Guang Yao Xiang Lei (lin acid, ester value, test method deep use snow material general test method, the general test method for the vast majority of the relevant standards for the effectiveness of the use of. Technical standard Appendix A is a reminder of the appendix.
This music lift mountain China Light Industry Federation Industry and Resources Department of the main center of the standardization center. The standard by the upstream fragrant sand filling institute,! \ door flower sound material shares company tribute single. Individuals: Xu Yi, Xu Cai Gou, Zhuang Xinjun, Lin Jieyi. Standard practice in short! From the original snow home 1 bureau installed light 1 standard Q/3767-9! Issued by the ticket.
-YYKNKA
Chinese People's Technology and State Light Industry Industry Standard
Patchouli Oil
QR/T25222001
neq 180 3757:1978
QH/T3767:1999
This standard specifies the technical requirements, test methods, inspection plan and marking, packaging, transportation and storage of sesame oil. This standard is applicable to sesame oil.
Cited Standards
The following clauses are included: they constitute the text of this standard through reference in this standard. When this standard was published, the version referred to was revised. All standards will be released, and parties using this standard should consider the possibility of using the latest version of the standard.
CR/T 14454.2
OB/T 14454.3—1993
GB/144±4.4—1993
GB/14454.5-1993
G3/T 14455.7-1993
GB/ 14455.4-1993
GBT539-1989
3 Definitions
Method for determination of refractive index
Microdetermination of photometry
Evaluation of density in ethanol
Determination of relative purity
Separation and analysis of spices by aerosol chromatography 3. : Yellow balsam pear
A kind of aromatic herb Pogosteunoncahlin (Blaneo) Bantham, grown in China, prepared by steam treatment, with its leaves expanded.
4 Technical requirements
4.1 Technical specifications shall be as follows: Provisions, Table 1
Item name inspection
Relative density, Z2
New light grid number, 20℃
Light intensity, 20℃
: V process alcohol connection degree, 20
Technical standard approved by China Light Industry Federation on November 15, 2001
Energy accumulation
Red color to single color
Characteristics The leaves have a general fragrance with a slightly cerebral aroma. The odor point is 955-0.983
1.5050--1.3120www.bzxz.net
Test details 1 Volume mixed drop 0% (V/V 14% he accumulated cattle. Present as a clear liquid
2002-05-01 Harmful application
5 Test method
5.1 Color verification
According to GB/1144 54.3 Determination.
5.2 Evaluation of aroma
Determined according to GB14454.2
5.3 Determination of relative density (20/20℃)
Determination according to GB/T14455.4,
5.4 Determination of the index of decomposition (20℃)
Determination according to GB14454.4,
5.5 Determination of optical rotation (20℃)
Determination according to GBT14454.5
5.6 Evaluation of the latent value in 90% (V/V) ethanol (20℃ Determination according to GB/T14455.3,
:, oil content is not determined by one) 6 Inspection rules
6.1! The whole production plant inspection department is responsible for the inspection: the production plant guarantees the product of the household factory All meet the requirements of this standard. 6.2 The acceptance unit has the right to inspect the quality of the received products according to the various specifications of this standard to see if they meet the requirements of this standard. Each batch number shall be accepted once, and different batch numbers shall be accepted separately. 6.3 Sampling method: For each batch of packaging units, 3 samples shall be taken from 100 units, and 3 samples shall be added from outside for more than 100 units. When sampling the packaging, the appearance shall be checked for moisture and impurities, and then the sample shall be fully mixed. Then 50mL of the sample shall be drawn from each glass sampling tube, injected into the sample warmer and mixed evenly, and respectively put into two clean and dry glass bottles with sandpaper. The bottles shall be marked with: manufacturer name, product name, production phase, batch number, quantity and sampling date. The bottles shall be used for inspection and retained for future reference.
6.4 If one of the indicators in the acceptance results does not meet the requirements of this standard, The factory may retest the two pieces of goods at a time. If the retest results still show unqualified indicators, the batch of products cannot be accepted. 6.5 When the supply and demand parties have a complete product quality agreement, the two parties may set up a joint venture or a statutory testing agency. Marking, packaging, transportation, storage
.1 Marking
The product packaging should indicate the product name, manufacturer, brand, trademark, batch number, net weight, date of production and product standard number. If there are special requirements, you can make a separate agreement with the manufacturer. 7.2 Packaging
Guangyuxiang should be packed in clean iron or iron with a clean surface. Each batch of products leaving the factory should be accompanied by a quality certificate, which includes: manufacturer name, product name, date of production, batch number, trademark, and proof that the product quality meets this standard.
7.3 Transportation
During transportation, the product should be loaded and unloaded lightly, and should be protected from exposure to sunlight and rain. The product should comply with the regulations of relevant departments. 22
YYKNKA-
Q0/T 25222001
The product should be stored in a dry, ventilated, shaded warehouse to prevent contamination by foreign air. Under the transportation conditions that meet the requirements, the packaging is neat and not self-sealed. The product shelf life is two years. 5
A1 Working conditions
QB/T2522—2001
Appendix A
(Appendix shown)
Guangdong sesame oil type gas cotton chromatogram (area-mass spectrometry)A1.1 Column: block column, length 3m*4m, inner diameter 3mmA1.2 Phase: Carbowa 20M, 5%-u% Chmsorb WAWDMESo-80LA1.3 Chromatographic oven temperature: linear program temperature increase from 70℃ to 200℃, 2℃/minA1.4 Inlet temperature, 230℃.
A1.5 Detector temperature, 230℃.
11.6 Grid: Hydrogen flame purifier, A17 Carrier gas: Oxygen.
A1.8 injection volume: 0.2uL:
2 Guang Yao Xiu Bo typical phase anxious map (area normalized activity) see country 11: 2-, 3β-%, 4-: 5- Guang Cun
6-2-lithene: 7—% dangerous not travel: 5— seasonal alcohol Figure A! " Xiang Chong typical gas negative spectrum (area normalized method) 24
-YYKNKA-
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.