title>JB/T 3411.13-1999 Die Jacket Dimensions - JB/T 3411.13-1999 - Chinese standardNet - bzxz.net
Home > JB > JB/T 3411.13-1999 Die Jacket Dimensions
JB/T 3411.13-1999 Die Jacket Dimensions

Basic Information

Standard ID: JB/T 3411.13-1999

Standard Name: Die Jacket Dimensions

Chinese Name: 板牙夹套 尺寸

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1999-05-20

Date of Implementation:2000-01-01

standard classification number

Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools

Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories

associated standards

alternative situation:JB 3423-1983

Publication information

other information

Focal point unit:Mechanical Science Research Institute

Publishing department:Mechanical Science Research Institute

Introduction to standards:

JB/T 3411.13-1999 This standard is a revision of JB 3423-83 "Die Jacket Dimensions". Only the following points were modified during the revision, and the main technical content remained unchanged. ——Writing format; ——Standard plus English name; ——Related reference standards and related content; ——Thread drawing method. This standard specifies the type and size of die jackets. JB/T 3411.13-1999 Die Jacket Dimensions JB/T3411.13-1999 Standard download decompression password: www.bzxz.net

Some standard content:

[CS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T 3411.1-3411.16—1999
Accessories ofgeneral purpose parallel lathes1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
1 Scope
Machinery Industry Standard of the People's Republic of China
Clamping bush for thread cuttiag dieDimensiunsThis standard specifies the types and sizes of thread cuttiag die. 2 Types and sizes
Types and sizes shall be as specified in the following figures and tables. h/2
Basic scale
3 mark
Suction limit deviation H9
.a.052
Mark shows protection:
Basic sizewwW.bzxz.Net
d=20mm, =5mm, 0=36mm die production: bottle tooth clamp changes to 20×5×36JB.T3411.13—1999 National Machinery Industry Bureau 1999-45-20 approved 16
d325mm
Ultimate protection household
J3411.13—1999
Replace B3423—83
2000-01-11 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.