Some standard content:
1C.S55.200
Machinery Industry Standard of the People's Republic of China
JB/T9084-1999
Labeling machine
Labeling machine
1999-07-12 Issued by State Bureau of Machinery Industry, implemented on January 1, 2000, JB9084-1999. This standard is a revision of ZBA84001-89 (Labeling Machine 3). During the revision, only the relevant regulations were edited, and the main technical content remained unchanged. This standard replaces ZBA84001-B9 from the date of implementation. This standard is proposed and managed by the Liquid Packaging Machinery Standardization Subcommittee of the National Packaging Standardization Technical Committee. The responsible drafting units of this standard are: Shanghai Light Industry Machinery Technology Research Institute, Machinery Standardization Research Institute, and the main drafters of this standard are: Sun Chuan'e, Qu Minyang, Hu Youwen, Qian Chongda. 1 Scope
Machinery Industry Standard of the People's Republic of China
Labeling Machine
Labeling Machine machine
JB.T9184-1944
2BA8400189
This standard specifies the type and basic parameters of labeling machines, installation requirements, test methods, inspection rules, and requirements for marking, packaging, inspection and storage.
This standard is used for labeling machines that use adhesives to stick labels on packaging devices or products (hereinafter referred to as packages). This standard does not apply to shrink label machines, sewing label machines and sizing label machines. 2 Reference standards
The provisions contained in the following standards are the provisions of this standard through reference in this standard. When this standard is published, the different versions are valid. All standards will be revised. All parties using this standard should explore the possibility of using the latest versions of the following standards. G82639—1990
GB4544—1996
GBIT5226.11996
GB/T 7311—1587
GB/TJ33841992bzxz.net
JR/T7232—1994
QR659—1979
3 Type and basic static
3. 1 Type
Glass bottle
Beer bottle
Industrial machinery electrical equipment Part 1: General technical provisions Packaging machinery model compilation method
General technical requirements for packaging of electromechanical products
Determination of noise level of packaging machinery Simple Fayandi wine bottle
3.1.! Good labeling machine is divided into two types: direct reverse labeling machine and turntable labeling machine. 3.1.2 The labeling machine should mainly consist of the following parts: package conveying mechanism
b) label taking mechanism and label transmission mechanism: c) adhesive coating mechanism;
3) labeling mechanism;
e) label finishing mechanism;
F transmission mechanism:
Electrical control device:
If necessary, auxiliary printing mechanism or auxiliary mechanism can be added. 3.1.3 Method of indicating the number of the label
Approved by the State Machinery Industry Bureau on July 12, 1999 and implemented on January 1, 2000
JB/T9084-1999
The model number of the labeling machine shall comply with the provisions of GB7311. The method of indicating is as follows: cutting and packaging products, packaging materials, packaging capacity or automatic pressure holding, etc. Machine number productivity, piece inin
Adhesive labeling machine, use TN 3.1.4 Labeling system
The adhesive bag labeling machine with a productivity of pieces/mn is marked as: 1N-803.2 Basic data
The basic data should mainly include: productivity, packaging specifications, label specifications, power, device dimensions, device weight, etc. 4 Technical requirements
The labeling machine shall comply with the provisions of this standard and be manufactured in accordance with the drawings and technical specifications approved by the prescribed procedures. 4.2 Working conditions
4.2.1 Packaging containers
The packaging containers used for labeling machines shall be containers that meet the requirements of QB659, GB2639, 0B4544, as well as containers of various materials and shapes that are suitable for the operation requirements of labeling machines and have corresponding qualities. 4.2.2 Labels
Labels used in labeling machines should have a flat fiber and a certain strength. After printing, labels should not be ventilated under 80kPa pressure
4.1.3 Adhesive
Use adhesives that meet the labeling standards. They should be chemical pulp, powder paste or other adhesive pastes. The adhesive should have a certain viscosity and be non-sticky. 4.3 The parts and components of the labeling machine must have a quality certificate. Purchased parts and external parts must have a certificate of conformity. If there is no such certificate, the manufacturer should conduct an inspection and use it only after it passes the inspection. 4.4 The labeling machine shall have a quality rate of no less than 0.0% for packages (except ampoules). 4.5 The labeling action shall be accurate and reliable. The labeling shall be smooth. The qualified rate of labeling shall be no less than 98%. 4. The labeling machine shall paste the label straightly. The skewness of the label after pasting shall meet the requirements of Table 1. The skewness of the labeling station (“)
The proportion of defective packages in the labeling machine (%)
4. The labeling machine shall not have abnormal noise or vibration during operation. The noise during idling shall not be greater than 82dB (z)2
4.8 The air control of the labeling machine should be safe, accurate and reliable. The electrical connectors should be firmly connected and numbered. The wires should not be broken, damaged or otherwise damaged. The insulation should not be less than 1m. The labeling machine should also have good grounding protection measures. The resistance between the external protective wire and any exposed parts of the electrical equipment and the labeling machine housing should not be greater than 0.1. The electrical system of the labeling machine should be subjected to a withstand voltage test of [min. The minimum test voltage should be 800V. 2
JB.T 9084--1999
4.9 The labeling machine should run smoothly, and there should be no jamming of moving parts. Various movements should be flexible, coordinated and accurate. All operations should be able to be adjusted according to the design requirements
4.10 The labeling machine should be well lubricated and have no oil leakage. 4.11 The adhesive of the labeling machine should not contaminate the machine and affect the normal operation of the machine. 4.12 The paint of the labeling machine should meet the requirements. 4.13 The labeling machine has interlocking protection: a) When there is no package to be labeled, stop taking the label; b) When the package falls or gets stuck, the machine stops working. 4.1 The service life of the labeling machine under normal conditions shall be no less than one year (two-shift system) and the service life before the first maintenance shall be no less than one year (two-shift system). 4.15 Under the condition that the user complies with the installation and use regulations of the product, if the product cannot work normally due to poor manufacturing quality within 18 months from the date of delivery and within 12,000 months from the date of user installation, the manufacturer shall repair or replace it for the user free of charge. 5 Test method 5.1 Package damage rate test The test should be carried out after the labeling machine can operate continuously and normally. Sampling classification The test is conducted twice, with 5000 samples taken each time. The number of damaged packages during this period is measured. The package damage rate should be calculated according to formula (1): Package damage rate Number of damaged packages 10000
5.3 Station label wearability test
The test is carried out after the labeling machine is fully charged and the test is carried out after the machine is fully charged and the test is carried out twice, with 250 samples taken each time, and the number of packages that do not meet the requirements of 4.5 is measured. The qualified rate of labeling is calculated according to formula (2): Unqualified packaging,
Account label qualified rate=(1-
×1 009%
There are chain folds, bubbles, curling edges and visible adhesive marks on the label after labeling. The packaging and missing labels are all unqualified products.
5:3 Label sticking egg slope test
The label tape slope refers to the angle between the actual center line position of the label (mainly rectangular labels) after it is stuck on the package and the original theoretical center line.
For elliptical or other shaped labels, the slope of the label can be calculated by referring to the rectangular label. If there are multiple labels on the same assembly, the relative theoretical position of each label can be calculated according to the definition of the industry. The label needs to be pasted with a certain slope. The test should be carried out when the labeling machine can be tested and can continue to operate normally. Sampling should be carried out twice, and 250 pieces should be selected each time. The distance between the two ends of the bottom of the label and the selected reference is measured. The difference between the two distances divided by the label width is the actual value of the label pasting slope. Find out the corresponding positive slope. The difference should not be greater than the label pasting material tolerance. 5.4 Acoustic test shall be in accordance with the provisions of IB/I7232
5.5 Insulation resistance, grounding resistance and withstand voltage test of electrical equipment shall be in accordance with the provisions of 0B/T5226.1. 6 Inspection and measurement
6.Each product must be inspected and qualified by the quality management department before it can be shipped out of the factory, and it must be accompanied by a certificate proving its qualification. JB/T084-190 No.
6.1 Inspection of labeling machines is divided into: full inspection and spring inspection, 6.2.1 Inspection
The inspection of labeling machines should be carried out by the manufacturer according to the product samples and the requirements of relevant technical documents, and the inspection department should have the original records of the inspection. 6.2.1.1 Idle operation inspection
Each labeling machine shall be tested for idle operation after assembly. During the test, the machine should be operated from high speed to high speed step by step, and finally run at a certain speed, and the duration should not be less than. Idle running test If the labeling machine meets the requirements of 4.11, 4.14, and 13, or if any of the requirements are not met during the test, the test is considered to have failed. 6.2.1.2 Performance test After the labeling machine has completed the idle running test, the performance test shall be carried out in accordance with the requirements of the product manual. The test shall be carried out after the machine has run normally at a certain speed. The test shall be carried out at least stably and continuously at the rated speed for 10 minutes to prove that the labeling machine can meet the specified production requirements. The performance test shall meet the requirements of 4.5 and 4.6. If any of the requirements are not met during the test, the test is considered to have failed. 6.2.1.3 10% of each labeling machine, but not less than 10% of the labeling machine, shall be tested for label sticking delay and labeling reliability. The test shall meet the requirements of 4.5 and 4.6. If any of the requirements are not met during the test, the test is considered to have failed. 6.2.2 Type inspection 6.2.2. Type inspection shall be carried out in the following circumstances: a) When a new product is transferred from an old product to a new factory for trial production and appraisal; b) After the production is stopped for 2 years, if there are major changes in specifications, materials, and processes, it may affect the product performance; c) When the production is resumed after 2 years of suspension; when the factory inspection results are significantly different from those of the last type inspection; e) When the national development base supervision agency proposes the requirement for type inspection. 3.2.2 During the type inspection, the quality of the labeling machine shall be fully checked, that is, all the technical requirements specified in the standard shall be checked (if necessary, additional inspection items may be added by agreement between the two parties). Marking, packaging, transportation and storage
7.1 Marking
Each product shall be fixed with a product nameplate in an appropriate and obvious position. The nameplate shall have the following contents: a) Name of manufacturer:
b) Product name:
) Product model:
) Production date (or number) or production batch number
7.2 The packaging composition of the labeling machine shall comply with the requirements of GB/T 13384. The following documents shall be placed in the packaging box of the labeling machine: ) Packing list:
b) Product certificate:
e) Product manual.
7.3 Transportation
JB/T9084—1999
The whole labeling machine or the parts of the separate transport shafts shall be suitable for the requirements of land and water transportation and loading. 7. 4 Storage
Labeling machines are prohibited from being piled up in the open air or piled up with corrosive chemicals. The packaging should be unpacked and inspected every month of storage, and re-oiled and packaged if necessary.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.