JB/T 6034-1992 Mechanical extension screed width series for asphalt concrete pavers
Basic Information
Standard ID:
JB/T 6034-1992
Standard Name: Mechanical extension screed width series for asphalt concrete pavers
Chinese Name:
沥青混凝土摊铺机 机械延伸熨平板宽度系列
Standard category:Machinery Industry Standard (JB)
state:Abolished
Date of Release1992-05-28
Date of Implementation:1993-01-01
Date of Expiration:2008-01-01
standard classification number
Standard Classification Number:Engineering Construction>>Construction Machinery and Equipment>>P97 Construction Machinery for Building Engineering
Publication information
other information
Focal point unit:Tianjin Engineering Machinery Research Institute
Publishing department:Tianjin Engineering Machinery Research Institute
Introduction to standards:
This standard specifies the width series of mechanically extended screeds for asphalt concrete pavers. This standard applies to mechanically extended screeds for asphalt concrete pavers. JB/T 6034-1992 Width series of mechanically extended screeds for asphalt concrete pavers JB/T6034-1992 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
JB/T603492
Asphalt Concrete Paver
Mechanically Extended Screed Plate Width Series
Published on May 28, 1992
Implementation by the Ministry of Machinery and Electronics Industry of the People's Republic of China on January 1, 1993
Mechanical Industry Standard of the People's Republic of China
Asphalt Concrete Paver
Mechanically Extended Screed Plate Width Series
Subject Content and Scope of Application
This standard specifies the width series of mechanically extended screed plates for asphalt concrete pavers. This standard applies to mechanically extended screed plates for asphalt concrete pavers (hereinafter referred to as mechanically extended screed plates). 2 Terminology
2.1 Mechanically Extended Screed Plate
A screed plate that is fastened to another screed plate by fasteners to extend and widen it. 2.2 Mechanically Extended Screed Plate Width
The distance L between the two mounting surfaces of the mechanically extended screed plate is as shown in the figure below. 3
Mechanically extended screed width series
JB/T603492
The width dimensions of mechanically extended screeds shall comply with the provisions of the following table. The first series shall be used first. When the design requirements cannot be met, the second series shall be used.
Series 1
Series 2
Additional notes:
This standard is proposed and managed by the Tianjin Engineering Machinery Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Tianjin Engineering Machinery Research Institute of the Ministry of Machinery and Electronics Industry. The main drafters of this standard are Chen Shengqi and Zhang Quanxing. Approved by the Ministry of Machinery and Electronics Industry on May 28, 1992, 875
Implemented on January 1, 1993
People's Republic of China
Mechanical Industry Standard
Asphalt Concrete Paver
Mechanically Extended Screed Width Series
JB/T 6034—92
Published by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry Printed by the Mechanical Standardization Research Institute of the Ministry of Machinery and Electronics Industry (PO Box 8144, Beijing 100081)
Copyright reserved. No reproduction allowed
Format 880×1230
1/16 Printing sheet 1/4
Word count 2.000bzxZ.net
First printing in October 1992
First edition in October 1992
Print run 00.001—500 Price 1.00 Yuan
Serial number 0968
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.