This standard specifies the dimensions and tolerances of coaxial resistance spot welding electrode holders (type A) with cable clamping structure. The holder is fixed directly to the welding cylinder of the multi-spot welding equipment using its 1:10 taper cone handle. JB/T 10256.1-2001 Resistance spot welding - electrode holders Part 1: Matching taper 1:10 JB/T10256.1-2001 Standard download decompression password: www.bzxz.net

CS25.160.30
Machinery Industry Standard of the People's Republic of China
JB/T10256.1-200#
cqv1S08434-1:1988
Resistance spot welding-Electrode holders Part 1: Taper fixing l:102001-05-23 Issued
China Machinery Industry Federation
2001-10-01 Implementation
JB/T10256.1-2001
This standard is equivalent to 1508130/1:1968 Resistance spot welding-Electrode holders Part 1: Fitting accuracy 1:1C. 4. This standard is formulated for the first time. The reason why this standard is equivalent to TSC8430/1 is as follows: 1. The gas source pressure of TSC8430/1 is specified as 1MPs in February 1985 for multi-spot welding machines. The gas source pressure is specified as 1MPs, which is inconsistent with the blood circuit system of most multi-spot welding lamps in my country (generally specified as 0.5MP in China). Therefore, this standard is temporarily unsuitable and has been cancelled. The corresponding amendments have been made in the national standard. The insulating layer material specified in the ISO 430/1 standard is PHCC2 (printed aldehyde layer cloth technology) in ISO 1642. This standard is invalid and no new standard has been proposed to replace it. In addition, the safety requirements of ISO 1557F-1995 electric welding machine have made effective provisions for the terminal resistance of the welding machine. The original standard using phenolic laminated cloth can no longer meet the requirements. Therefore, this standard. The GF/T1307.1 standard stipulates that the outgassing performance and mechanical properties of epoxy laminated cloth are much better than those of laminated cloth. In order to use this method, Chapter 2 and Chapter 5 of 1S6430/1 are compiled as Appendix 4 for users' reference. The appendix of this standard is the appendix of the proposal. This standard is proposed by the Technical Committee of Standardization of Machinery and approved by the Ministry of Industry and Information Technology. The drafter of this standard: Zhang Long JB/T10256.1—2001 ISO Foreword International Organization for Standardization (International Organization for Standardization) It is a global federation of international standardization bodies (ISOs). The development of international standards is carried out through the technical committees of ISO. Members interested in a particular field have the right to join the committee. Official and non-official international organizations in liaison with IS also participate in the work. IS cooperates with the European Standards Association (ESA) in technical standardization. The draft international standards of the ISO are circulated to the member bodies for voting. When they are published as Internet standards, at least 80% of the members must vote to approve them. The standard IS843/: is the latest IS standard. 0/TC44 Tanla and similar products are formulated by the "International Standard TS) 842, which consists of the following parts: The general title is resistance spot welding - electrode grip: Part 1: Fitting taper 1: 1U
Part 2: True push fit
Part 3: End-removable round handle fit
Machinery Industry Standard of the People's Republic of China
Resistance welding - electrode pole
Part 1: Fitting taper 1: 10
Resistalcespotweldiug—EkertrodeholrtergFart l:Tajer ring l:1e1Boguo
JB/T 10256.1—2001
eS0430-1:1988
This standard specifies the size and tolerance of the spot welding press (type A) with self-tightening structure. The 1:1 taper handle is directly fixed on the multi-spot welding equipment torch 1. Working cylinder 2 Reference mark
The provisions of the following standards are included in the provisions of this standard through reference in the relevant standards: At the time of publication of the standard: All are valid. All standards are subject to revision, and users of the standards should explore the possibility of using the latest version of the following standards. 3 lines 130. 2 1 ball oxygen glass cloth Wu pressure plate || tt || J8/3946--1999: electric point rate electrode afraid 9505821: 1979 J/T4281-1599 resistance welding electrode and accessories monthly materials: (egTS) 5192: 1978) JB/623 [-1932 resistance spot welding equipment electrode cold pipe (eqT509313: 1989) 13/9527-: 1999 spot welding equipment mesh cone lifting gauge and round armor ring gauge (ec v1S058221982)m/T10113--9 Resistance welding equipment two said water-cooled connecting block opposite the secondary connecting cable size litby (eTS5828:1983)
J/1 compensation 55.1-2m0 electric limit spot welding electrode joint, external dimension 1:50 Part 1: Ink chain matching, dimension 1-13 (itTS05183-1:1098)
3 size
The dimensions of the electrode grip are shown in Figure 1 and the old.
4 Standard
The markings for electrode grips in accordance with the provisions of this standard shall indicate the following in the given order: a) Name (e.g. "Spot welding electrode grip"): b) Standard code adopted, JE/10266.1; Type of ECG grip (Type A):
c) Nominal diameter,
e) Total length L, :
f Material for manufacturing spot welding electrode rod (should be 1231), plus: A (ratio 1:10) torch electrode rod, nominal diameter 16m, total length = 10m: material is 2/1, and the marking shall be:
Approved by China Machinery Industry Federation on May 23, 2001, implemented on October 1, 2001
JB/T 10256.1—2001bzxz.net
Spot welding telegraph buried pole JB/T102G9.1-A-1Gx203-2/15Material
The material of the electrode fence shall comply with the provisions of JB/T102G9.1-A-1Gx203-2/15. It is recommended to use Group A Class 2. The insulating layer shall be made of a material: glass laminate (see GT1307.!). 6 Delivery conditions
The packaging method adopted shall be consistent with the above standard. The sub-marking
All products that meet the requirements of this standard shall be marked according to the specified marking method and internal production except that the standard code (JP101256.1-201) used in the name can be omitted: JP101256.1-201) can be omitted. Open the parachute
You remember
*See/T9527
Inner six directions
Figure 1—Dimensions
Nominal point diameter:
JB/T10256.1—2001
Nominal diameter and diameter of electrode and casting joint are the same as those of electrode and casting joint. See JE/T6231
Zhou Xing 10256.1
Steal the picture, keep it for internal inspection 12
Ice Alliance Construction Control Cable
(LI.FE FAPG)
, China Jing
Ma 412
Figure 2-number matching example
cold door length
Ls*:+15
ethylene fast work-
electrode liquid head
electric effect Pa
early BT8
2 reference standard
JR/T10256.1-2001
radio recorder
"Appendix to the Photographing"
1S08430-1 in the second section, the original text of the fifth chapter 1501642:1987 Thermosetting resin industrial laminate specification (has been made into"
150 5132:1978
Resistance welding electrodes and accessories, pressure materials
1505181-1:158 Resistance spot welding electrode joints, external dimension 1:10 Part 1: Taper fit, taper 1:101505821:1979 Resistance spot electrode joints
IS0 5822:1982
Staple gauges and taper ring gauges for resistance welding equipment
Dimensions and construction of secondary connecting cables for connection to water-cooled connectors of resistance welding equipment IS0 5928:1983
1507285:1989
IS0 9313:1989
5 Materials
Multi-spot welding machine
Resistance spot welding equipment
Electrode cooling tube
Electrode grip material should comply with the provisions of 1S05182, and it is recommended to use group 1 class 2. The insulation layer should be made of the following materials: red insulation layer IS01642PFOC2.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.