drafter:Yu Yanjun, Zhao Haolibao, Wang Libing, Zhou Lei, Xu Chuanlai, Wang Xiaobing
Drafting unit:Tianjin Institute of Inspection and Quarantine, Sinochem Chemical Standardization Institute, Jiangnan University, etc.
Focal point unit:National Technical Committee on Hazardous Chemicals Management Standardization
Proposing unit:National Technical Committee on Hazardous Chemicals Management Standardization
Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
This standard is formulated for the first time. This standard specifies the test equipment, test requirements, test steps and test reports for the combustion heat test of dangerous goods aerosols. This standard is applicable to the determination of the combustion heat of dangerous goods aerosols. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Test and Criteria Manual", and is not equivalent to them. Its relevant technical content is completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000. GB/T 21614-2008 Test method for the combustion heat of dangerous goods aerosols GB/T21614-2008 Standard download decompression password: www.bzxz.net
This standard is formulated for the first time. This standard specifies the test equipment, test requirements, test steps and test reports for the combustion heat test of dangerous goods aerosols. This standard is applicable to the determination of the combustion heat of dangerous goods aerosols. This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria", and is not equivalent to them. Its relevant technical content is completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria", and is not equivalent to them. Its relevant technical content is completely consistent with the above manuals, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard: Jiangnan University, Sinochem Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
The main drafters of this standard are Yu Yanjun, Zhao Haolibao, Wang Libing, Zhou Lei, Xu Chuanlai and Wang Xiaobing.
This standard is formulated for the first time. The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this standard.
ASTM D240 Standard Test Method for Determination of Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
United Nations "Recommendations on the Transport of Dangerous Goods - Model Regulations"
United Nations "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria"
Some standard content:
10513.300 National Standard of the People's Republic of China 8/21614-2008bzxz.net Dangerous goods Test method for heat of combustion of spray 1unyerias yoods--rest metkod Ior htat conbustion of spray aerosols2008-04-01 issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China. 2008-09-01 implemented by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China. 8/21814-2008. This standard is about the avoidance of dangerous goods in the transportation of goods. It is about the research and development of the United Nations and the United Nations. It is related to the technology of driving and the width of the car. The standard text is connected to G31. 2000. The standard is issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Standardization Administration of China. The units responsible for this standard are: the Institute of Standardization of Nanjing University and the Tianshou Exit Inspection and Quarantine Bureau. This part mainly focuses on the following aspects: the standard for the whole process, connection, connection of the device and pipe. Test method for heat of combustion of spray G8/21614--2008 This standard specifies the test method for heat of combustion of spray, test requirements, test report and other related information. Normative references The following documents contain clauses that are intended to become part of this standard. Any reference not indicating the date of the reference shall be used only with reference to the latest edition of this standard. The latest edition of this standard shall apply to all references not indicating the date of reference. ASTM, DEO, UN, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, United Nations, conhos handle the quantity of the technology test design students' teaching food hot customers' heartburn ideas green your suggestions for the construction of dangerous goods test to the standard test equipment including calorimeter, camera tank material warhead etc. A5 1) 210 read the rules 5 test requirements 5.1 Equipment requirements new teaching concept: Ma volatile fuel color calorimeter is used to measure the combustion point of non-volatile fuel or the combustion pressure of the material 5.? Environmental requirements: The test should be carried out in an environment with a temperature of 20-25°C and a humidity of 30-30%. Avoid direct sunlight. Weigh the product with 31 mL of water in a pipette. 8/21814--2008. 6. Adjust the air to room temperature with oxygen at 0.0MPa. 6.4 Adjust the intensity of heat-rising water. 6. Carry out three tests on the same product. Test results: Calculation of test results: 1.1 Concentration of equal concentration in the mixture: 7.1.2 Concentration of equal concentration in the mixture: 2.1.3 Chemical quantity: 7.1.4 Gross heat of combustion: 3.1.5 Net heat of combustion. 7.2 Test shrinkage judgment 7.2.1 This solution is for extremely flammable food: for food and equipment outside the city, and the combustion heat is equal to 30K/72.2 The sample is non-combustible, and the combustion temperature is small. The test report is with the name of the test product and the number of samples. The test records and the observations made during the test are as follows: The test method is in accordance with the standard of this standard. The test data is obtained by the scientific research personnel and the test data is B8/T 21694-2008. The national standard for scientific and technological personnel is the quality standard of dangerous goods. Test method for heat of combustion of dangerous goods G5,1 21812 -2e08 China Construction Environmental Protection Administration issued the service South City Fuzhengmenwai Third Hebei Street To: 45 e www, apr. 1r. c. #Tel: 68623988586174 All tours are quality-controlled Open the thick printing "learning 2 years and the last 30 years of the month of preparation for the reform Xin: 3ss Ao Q If the library is adjusted and the reputation of the distribution center is wrong, the copyright is proprietary and the slow withdrawal will be investigated Report phone: (010268533533 80001917 1/3 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.