MT 187.7-1988 Scraper conveyor fasteners Cup head square neck bolts
Basic Information
Standard ID:
MT 187.7-1988
Standard Name: Scraper conveyor fasteners Cup head square neck bolts
Chinese Name:
刮板输送机紧固件 半圆头方颈螺栓
Standard category:Coal Industry Standard (MT)
state:in force
Date of Release1988-04-13
Date of Implementation:1988-08-01
standard classification number
Standard Classification Number:Machinery>>General Parts>>J13 Fasteners
associated standards
Publication information
publishing house:China Coal Industry Press
Publication date:1988-08-01
other information
drafter:Du Jian, Cong Peijian
Drafting unit:Harbin Coal Mine Machinery Research Institute
Focal point unit:Coal Science Research Institute Taiyuan Branch
Proposing unit:Technology Development Department, Ministry of Coal Industry of the People's Republic of China
Publishing department:Ministry of Coal Industry of the People's Republic of China
Introduction to standards:
This standard applies to the semicircular head square neck bolts (hereinafter referred to as bolts) used in scraper box conveyors or transfer machines in coal mines. MT 187.7-1988 Scraper conveyor fasteners Semicircular head square neck bolts MT187.7-1988 Standard download decompression password: www.bzxz.net
Some standard content:
Scope of application
Ministry of Coal Industry of the People's Republic of China Scraper conveyor fasteners
Semi-round head square neck bolts
MT 187.7-88
This standard applies to semi-round head square neck bolts (hereinafter referred to as bolts) used in underground coal mine scraper conveyors or transfer machines. 2 Reference standards
Scraper conveyor fasteners
3 Product classification
3.1 The product has two specifications, M12 and M16. wwW.bzxz.Net
Bolt technical conditions
3.2 For types and sizes, see the figure below and Tables 1 and 2. Table 1
Limits approved by the Ministry of Coal Industry of the People's Republic of China on 1988-04-13
Implementation on 1988-08-01
Weight per 1000 steel
bolts
3.3 Marking example:
MT 187.7-88
Coarse pitch ordinary thread, major diameter 16mm, length 34mm, mechanical properties of semicircular head square neck bolts according to grade 4.6: Bolts M16×34—4.6MT187.7—88
3.4 Marking description:
4 Technical requirements
M16X34—8.8
The mechanical properties of the bolts shall not be less than grade 4.6. 4.1
4.2 The technical conditions of the bolts shall be in accordance with the provisions of MT187.1. Additional notes:
MT187.7--88
—Standard code
Performance level
Product specification
Product name
This standard is proposed by the Technology Development Department of the Ministry of Coal Industry of the People's Republic of China. This standard is under the jurisdiction of the Taiyuan Branch of the Coal Science Research Institute. This standard is drafted by the Harbin Coal Mine Machinery Research Institute. The main drafters of this standard are Ji An and Cong Peijian. This standard is entrusted to the Taiyuan Branch of the Coal Science Research Institute for interpretation. 226
The limit deviation of L
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.