This standard specifies the implementation conditions, test items, test procedures and test report contents of the fire truck type test. This standard is applicable to all types of fire trucks that are domestically produced, produced with imported foreign technology, or jointly designed and manufactured by China and foreign countries. GB 16279-1996 Fire Truck Type Test Procedure GB16279-1996 Standard Download Decompression Password: www.bzxz.net

GB16279--1996
Fire truck type test refers to the whole vehicle design type test, the purpose of which is to assess the design drawings, including whether the overall design, performance, reliability and materials meet the original design requirements, to ensure that it has excellent performance and reliability after production, and to meet the actual use requirements. The fire truck type test is a comprehensive quality assessment before the fire truck is put into production. This standard shall be implemented from November 1, 1996. From the date of implementation, the fire truck type test shall be carried out in accordance with the provisions of this standard. Appendix A and Appendix B of this standard are both standard appendices. Appendix C of this standard is a prompt appendix.
This standard is proposed by the Ministry of Public Security of the People's Republic of China. This standard is under the jurisdiction of the Fourth Technical Committee of the National Fire Standardization Technical Committee. The drafting units of this standard: Shanghai Fire Science Research Institute of the Ministry of Public Security, China Automotive Technology Research Center. The main drafters of this standard: Fan Hua, Wan Ming, Li Enxiang, Li Baozhong, Yan Jingmao. 474
1 Scope
National Standard of the People's Republic of China
Fire vehicle-engineering approval evaluation programGB16279-1996
This standard specifies the implementation conditions, test items, test procedures and test report contents of the fire vehicle type test. This standard applies to various types of fire trucks produced domestically, produced with foreign technology and jointly designed and manufactured by China and foreign countries. Fire motorcycles can refer to this standard for implementation. 2 Reference standards
The reference standards are shown in Appendix B (Appendix to the standard). 3 Implementation conditions
3.1 The test sample vehicle shall be provided by the manufacturer applying for the type test. 3.2 Number of sample vehicles: If the annual output is less than 600 vehicles, the test sample vehicle shall not be less than 1. If the annual output is greater than or equal to 600 vehicles, the test sample vehicle shall not be less than 2.
3.3 Before the test, the manufacturer must provide the following documents: a) Product description (main technical characteristics and performance parameters); b) Brief instructions for use and maintenance (including special fire-fighting equipment); c) Test reports of the whole vehicle and assembly parts that have been conducted during the development process; d) Documents that can prove that the inspection and confirmation items in Table A1 of Appendix A (Appendix to the standard) meet the requirements of the corresponding standards. 3.4 The finalization test unit shall formulate the test outline in accordance with this standard and conduct finalization tests. For test items that have been conducted by the manufacturer before the finalization test, if the finalization test unit verifies that they fully meet the requirements of this standard, they may be exempted from the test. 3.5 If one of the following situations occurs during the finalization test, the finalization test unit has the right to decide to terminate the test. a) The safety of the test or driving cannot be guaranteed;
b) The main parts and components are damaged and the manufacturer cannot provide qualified spare parts within one week. 4 Test items and methods
The test items are divided into four categories: F0, F1, F2, and F3. See Table 1 for each type of test item, and see Table 2 for the classification of F0, F1, F2, and F3. Table 1
Test items
4.1, 4.2, 4.3.2, 4.3.34.3.7 (by vehicle type), 4.4~4.12, 4.13~4.14 (by vehicle type), 4.15, 4.164.1, 4.2, 4.3.2, 4.3.3~4.3.7 (by vehicle type), 4.4~4.12, 4.14 (by vehicle type), 4.15, 4.16
Approved by the State Administration of Technical Supervision on April 5, 1996Reliability driving mileage, km
Implemented on November 1, 1996
Test items
GB 16279-1996
Table 1 (end)
4.1, 4.2, 4.3.2.1, 4.3.2.3, 4.3.2.4, 4.3.2.5, 4.3.3~4.3.7 (by vehicle type), 4.4, 4.9, 4.12, 4.14 (by vehicle type), 4.15
Performance of the modified part
Overall structure of the vehicle and modification method
Fire truck with a completely new design of chassis and upper vehicle
Fire truck with a standardized assembly design
Adopting a standardized assembly design Fire trucks modified from the second-class chassis of the type are partially modified on the finalized fire trucks. 4.1 Receive and inspect the test sample
Reliability Mileage, km
Chassis is redesigned
All parameters are within the limits specified for the chassis
Only add or partially modify the special fire-fighting equipment 4.1.1 Receive the sample and register it according to Appendix C (Suggested Appendix) Sample Registration Form. 4.1.2
Inspect the test sample, focusing on the steering, braking and other parts that affect driving safety and the special fire-fighting parts, and make detailed records.
4.2 Running-in
The running-in of the sample shall be carried out in accordance with the factory regulations. Parts and components shall not be replaced at will, and detailed records shall be made. 4.3 Inspection, confirmation and testing of items specified by mandatory standards and laws and regulations 4.3.1 Inspect and confirm the requirements that must be met and the devices that must be installed as specified by mandatory standards, laws and regulations, and record the results. For the inspection items, see the inspection and confirmation items table in Table A1 in Appendix A. 4.3.2 Whole vehicle
4.3.2.1 Measurement of external dimension parameters, according to GB/T12673, the results must comply with GB1589, 1.2 of GB7258-87 and Table 1 and Table 2 of GB7956-87. The main items are as follows: vehicle length, width, height, wheelbase, track, front overhang, rear overhang, approach angle, departure angle, minimum ground clearance. 4.3.2.2 Measurement of the position of external lighting and signal devices The installation position of the external lighting and signal devices that are mandatory according to Table 2 of GB4785-84 shall be measured. The number, position and light color of the external lighting and signal devices must comply with the regulations. 4.3.2.3 Measurement of emission pollutants
a) Measurement of HC and CO concentrations of gasoline vehicles under idling conditions, according to GB3845, must comply with the provisions of Chapter 5 of GB14761.5-93. b) Exhaust smoke measurement under free acceleration condition of diesel engine shall comply with the provisions of Chapter 5 of GB14761.6-93 in accordance with GB3846. c) Exhaust pollutant measurement under driving condition of light vehicle (total mass ≤ 3.5t) shall comply with Table 1 of GB14761.1-93 in accordance with GB11642.
4.3.2.4 Noise measurement:
a) External noise measurement under acceleration shall comply with GB1496 and GB1495. b) Internal noise measurement shall comply with 4.7 of GB6244-86 in accordance with GB1496. 4.3.2.5 Braking performance test
a) Braking system performance test shall comply with relevant provisions in accordance with ZBT24007. b) Braking performance inspection test, according to 4.13 of GB7258-87, must comply with Table 1 and Table 2 of GB725887. 4.3.2.6 Field of vision measurement
a) Driver's front field of vision, according to GB11562-94, must comply with the relevant provisions. 476
GB 16279--1996
b) Rearview mirror field of vision, according to Chapter 6 of GB15084-94, must comply with the relevant provisions. 4.3.2.7 Fire truck radio interference measurement, according to Chapter 5 of GB14023-92, must comply with Figure 1 of GB14023-92. 4.3.3 Fire truck water system
4.3.3.1 Strength and sealing test of water outlet pipe, according to 3.7 of GB7956-87, must comply with 2.2.3 of GB7956-87. 4.3.3.2 Maximum vacuum and sealing test, according to 3.8 of GB7956-87, must comply with GB795 6--2.2.4 of 87. 4.3.3.3 The maximum suction depth and water diversion time test at the maximum suction depth shall be in accordance with 3.9 of GB7956-87 and shall comply with 2.2.5 of GB7956-87. 4.3.3.4 The water diversion device reliability test shall be in accordance with 2.6.3 of GB6245-86. 4.3.3.5 The water discharge flow rate and water discharge pressure test of the fire truck shall be in accordance with 3.10.1.2 of GB7956-87 and shall comply with Table 5 and Table 6 of GB7956--87.
4.3.3.6 Rated spray pressure of fire monitors shall be in accordance with Table 8 of GB7956-87. 4.3.3.7 Measurement of fire monitor range shall be in accordance with 3.13 of GB7956-87 and shall comply with Table 8 of GB7956-87. 4.3.4 Foam system of fire trucks
4.3:4.1 Rated spray pressure of foam monitors shall be in accordance with Table 9 of GB7956-87. Measurement of foam monitor range shall be in accordance with 3.13 of GB7956-87 and shall comply with Table 9 of GB7956-87. 4.3.4.2
Determination of foaming multiple shall be in accordance with 3.15 of GB7956-87 and shall comply with Table 9 of GB7956-87. 4.3.4.32
Determination of mixing ratio of foam mixture shall be in accordance with 3.14, must comply with Table 9 of GB7956-87. 4.3.4.4
Determination of dehydration time, according to 3.15 of GB7956-87, must comply with Table 9 of GB7956-87. 4.3.4.5
4.3.5 Fire truck dry powder system
4.3.5.1 Determination of the maximum working pressure of the dry powder tank, according to Table 10 of GB7956-87. 4 .3.5.2 The measurement of the minimum working pressure of the powder tank shall be in accordance with Table 10 of GB7956-87. 4.3.5.3 The measurement of the filling time shall be in accordance with 3.16.3 of GB7956--87 and shall comply with Table 10 of GB7956-87. 4.3.5.4 The measurement of the residual powder rate
shall be in accordance with 3.16.5 of GB7956-87 and shall comply with Table 10 of GB7956-87. The effective spray rate test of dry powder cannon shall comply with Table 10 of GB7956-87 according to 3.16.6 of GB7956-87. 4.3.5.5
4.3.5.6 The effective range test of dry powder cannon shall comply with Table 10 of GB7956-87 according to 3.16.4 of GB7956-87. 4.3.6 The stability test of the lifting system of fire truck shall comply with 3.17.2.1 and 3.17.2.2 of GB7956--87 and 2.5.1 of GB7956-87. 4.3.6.1
4.3.6.2 The safety performance test of use shall comply with 3.20 of GB7956--87. In accordance with 2.5.4 of GB7956-87. 4.3.6.3 Strength determination of boom and ladder frame, in accordance with 3.18 of GB7956--87, must comply with 2.5.2 of GB7956-87. 4.3.7 Fire truck transmission system
4.3.7.1 Continuous working time test, in accordance with 3.10 of GB7956-87, must comply with 2.2.6 of GB7956-87. 4.3.7.2 Overload operation test, in accordance with 3.11 of GB7956-87, must comply with 2.2.7 of GB7956-87. 4.4 Vehicle parameter measurement
4.4.1 Vehicle mass parameter measurement, in accordance with GB/T12674. The main items are as follows: vehicle curb weight, total mass, axle load and axle load rate of each axle in curb state and full load state. 4.4.2 Measurement of center of gravity height, in accordance with GB/T12588. Measurement of the maximum stable roll angle of the vehicle (or calculation based on the center of gravity height). 4.4.3 Measurement of steering parameters:
a) Maximum steering wheel angle (left, right);
b) Maximum steering wheel angle (left, right);
c) Wheel alignment parameters (toe-in, wheel camber, kingpin inclination, kingpin castor). 4.4.4 Measurement of minimum turning diameter, in accordance with GB/T12540. 4.4.5 Measurement of driving wheel rolling radius, in accordance with GB/T12548. 4.5 Technical condition driving inspection, in accordance with GB/T12677, and calibrate the odometer at the same time. 4.6 Speedometer calibration, in accordance with GB/T12548. 477
4.7 Coasting test, in accordance with GB/T12536.
4.8 Power performance test
4.8.1 Acceleration performance test, according to GB/T12543: GB16279-1996
a) Direct gear (or common gear) acceleration performance test; b) Stationary start continuous gear shift acceleration performance test. 4.8.2 Maximum vehicle speed test, according to GB/T12544. 4.9 Fuel economy test, according to GB/T12545: a) Direct gear (or common gear) constant speed driving fuel consumption test; b) Multi-operating condition fuel consumption test.
4.10 Handling stability test:
a) Steady-state turning test, according to GB6323.6; b) Steering return performance test, according to GB6323.4; c) Steering lightness test, according to GB6323.5. 4.11 Ride comfort test, according to GB4970. 4.12 Body (cab) sealing performance test: a) Rainproof sealing test, according to GB/T12480; b) Dustproof sealing test, according to GB/T12478. 4.13 Regional adaptability Test (optional) 4.13.1 Adaptability test in cold regions:
a) Cold start performance test, according to GB/T12535; b) Heating performance test, according to GB/T12782. 4.13.2 Adaptability test in hot regions:
a) Cooling system cooling capacity test, according to GB/T12542; b) Oil supply system anti-gas blocking capacity test, according to GB/T12781; c) Cab insulation and ventilation performance test, according to GB/T12546; d) Air conditioning performance test.
4.14 Fire performance test
4.14.1 Determination of fire water monitor flow rate, according to 3.12 of GB7956--87, must comply with Table 8 of GB7956-87. 4.14.2 Determination of fire foam monitor flow rate, according to 3.12 of GB7956-87, must comply with Table 9 of GB7956-87. The rated filling volume of dry powder tanks shall be determined according to Table 10 of GB7956-87. 4.14.3
The operating performance test of aerial fire trucks shall be in accordance with 3.19 of GB7956-87. The hydraulic system of aerial fire trucks shall be in accordance with GB3766. 4.14.6 The hydraulic components used in aerial fire trucks shall be in accordance with JB2146 and GB7935. 4.14.7
The adjustment pressure of the safety relief valve of the hydraulic system shall be in accordance with 3.21 of GB.7956-87 and shall comply with 2.5.5 of GB7956-87. 4.14.8 The action stability test of aerial fire trucks shall be in accordance with 3.22 of GB7956-87 and shall comply with 2.5.6 of GB7956-87. 4.14.9 The reliability check of electrical limit shall be carried out on aerial fire trucks. 4.15 Reliability driving test
4.15.1 The reliability driving test of fire trucks shall be conducted in the automobile test field approved by the national automobile industry competent department according to the prescribed test specifications.
4.15.2 The reliability driving test of series models can be conducted by the manufacturer by selecting representative models. The selection of representative models should subject all assemblies to the most stringent assessment.
4.16 Performance retest
After the reliability driving test of FO, F1 fire trucks is completed, the performance retest of the whole vehicle shall be carried out. Before the retest, maintenance and adjustment can be carried out according to the vehicle manual. The retest items include 4.3.2.3, 4.3.2.4, 4.3.2.5b), 4.5, 4.7, 4.8, and 4.9 of this standard. 5 Test report
After the finalization test is completed, the test unit shall compile the finalization test report. The main contents are as follows: a) Source of the test task;
b) Purpose of the test;
c) Test object;
d) Main standards for the test;
e) Test conditions;
f) Test items and test results.
Inspection items
Vehicle marking
Steering system structure
Braking system structure
Brake hose assembly
Sun visor
Windshield defrosting device
Windshield defogger
Windshield wiper
Windshield washer
Operating parts, indicators, signals
Graphic signs of devices
Headlight
Turn signal light
License plate light
Position light and brake light
Rear fog light
Reversing light
Reflector
Speedometer
GB 16279—1996
Appendix A
(Appendix to the standard)
Inspection and confirmation items
Table A1 “Inspection and confirmation items table
Applicable models
All models
All models
All models
F0, F1 categories
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
Technical requirements
According to GB 7258-87 1. 1
According to GB 7258-87 3
According to ZBT24007-87 4
According to GB4784, GB.7062,GB10484
Installed at the front outer seat position
Performance as per ZB T26001
Must be installed
Must be installed
Must be installed
Performance as per 4.1 in GB15085-94
Must be installed
Performance as per 4.2 in GB 15085-94
Meet the requirements of GB4094
Illumination position as per 5.3 in GB7258--87
Inspection method
Confirmation mark or
Inspection report
Confirmation inspection report
Confirmation inspection report
Confirmation inspection report
Confirmation inspection report
Light distribution performance as per Table 1, Table 2, Table 3 in GB4599-94 Light distribution performance as per JB 4131-85 3
Light distribution performance according to JB4150-85 3
Light distribution performance according to GB592086 Table 1, Table 2. Table 3, Table 4, Table 5
Light distribution performance according to GB4660-84 Table 1, Table 2 Light distribution performance according to GB/T1155487 Table 1
Light distribution performance conforms to JB4151-85 3
Light distribution performance according to GB/T11564-89 5
According to GB7258-87 5.5.1
According to GB15082--94 3, 4
Confirm the inspection report
Confirm the inspection report
Confirm the inspection report
Confirm the inspection report|| tt||Confirmation of inspection report
Confirmation of inspection report
Confirmation of inspection report
Confirmation of inspection report
Inspection items
Wheels and tires
Door hinges
Seats and their fixings
Internal protrusions
Locking devices
Interior materials
Doors and window glass
Seat belt fixings
Wheel splash and flying stone protection
Seat belts
Fuel system safety protection
Crankcase forced ventilation device
Engine exhaust pipe outlet
Full load emission
Dry powder tank
Water tank, foam liquid tank
GB 16279--1996
Table A1 (end)
Applicable models
Technical requirements
The wheels and tires on the same axle are of the same model
Permanent marking on the wheels: specifications, trademarks
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
All models
Diesel vehicles
Dry powder vehicles
Water tankers
Foam vehicles
Permanent markings on tires: specifications, trademarks, plies, rated review, inflation pressure (standard wheel net, speed level, pattern type)
According to GB 15086-94 3.1
According to GB 15086-94 3.2
Strength performance according to GB15083-94 4
Conform to GB11552-89 4
Conform to GB/T 11568-89 3
Combustion characteristics according to GB8410--94 3.1,3.2.3.3According to GB 7258-87 9.4
Performance according to GB 9656-88 5
According to GB14167-93 4
According to GB 11567-94 3
According to 4 in GB14166-93
The location of the fuel tank shall be in accordance with 9.9 in GB7258-87
Must be installed
Performance shall be in accordance with Table 1 in GB14761.1-93
According to 10 in GB7258--87
According to GB 14761.7
Comply with the Safety Supervision Regulations for Pressure Vessels
Water tank shall be in accordance with 5.5.4 in GA39.4, and foam tank shall be in accordance with 5.6.10,5.6. in GA39.5. 11
Appendix B
(Appendix to the standard)
Cited standards
Test methods
Confirmation test report
Confirmation test report
Confirmation test report
Inspection, measurement
Confirmation test report
Confirmation certification mark
Confirmation test report
Confirmation test report
Confirmation test report
Inspection, measurement
Confirmation certification mark
Confirmation test report
Confirmation test report
Confirmation test report
Confirmation test report
Confirmation test report
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB1495--79 Permissible noise from motor vehicles
GB 1496---79
GB 1589--89
GB 3766—83
GB 3845—83
GB 3846--93
Methods for measuring noise from motor vehicles
Limits of vehicle outline dimensions
Technical conditions for ventilation of hydraulic systems
Methods for measuring rapid pollutants from gasoline vehicles
Methods for measuring free acceleration smoke from diesel vehicles
GB 16279—1996
GB4094-94 Graphical markings for road vehicle controls, indicators and signal devices GB4599—94 Photometric performance of vehicle headlights GB4660--84 Photometric performance of vehicle fog lights GB4784-84 Hydraulic brake hose assemblies for vehicles using non-petroleum-based brake fluids GB478584 Number, position and light color of external lighting and signal devices for vehicles and trailers GB4970--85 Test method for random input driving of vehicle ride comfort GB5920--86 Photometric performance of position lights and brake lights for vehicles and trailers Series, types, basic parameters and technical requirements for universal chassis of fire trucks GB 6244—86
GB6245—86 Performance requirements and test methods for vehicle fire pumps GB/T 6323.4-
Test method for vehicle handling stability Steering returnability test 94
GB/T 6323.5—94
GB/T 6323.6-—94
GB 7062—86
GB 11567--94
GB 7258—87
GB 7935---87
GB 7956—87
Test methods for vehicle handling stability
Test methods for vehicle handling stability
Automobile air brake hose assembly
Steering lightness test
Steady-state swing test
Wheel splash and flying stone protection devices for automobiles and trailersTechnical conditions for motor vehicle operation safety
General technical conditions for hydraulic components
Fire performance requirements and test methods for fire trucksGB 8410—94
Technical requirements for combustion characteristics of automotive interior materialsGB 9656—88
Safety glass for automobiles
GB 10484—89
Automobile vacuum brake hose assembly
GB 11552—89
Automobile interior protrusions
GB/T 11554—87
GB 11562—94
Photometric performance of rear fog lamps for automobiles and trailers
Requirements and measurement methods for the driver's forward field of vision of automobiles GB/T 11564—89
GB/T 11568—89
GB/T 11642-89
GB/T 12535-90
GB/T 12536--90
GB/T 12538—90
GB/T 12478—90
GB/T 12480—90
GB/T 12540—90
GB/T 12542--90
GB/T 12543--90
GB/T 12544—90
GB/T 12545--90
GB/T 12546—90
GB/T 12548—90
GB/T 12673—90
Technical conditions for retro-reflectors for automobiles and trailersAutomobile hood lock device
Test method for exhaust pollutant emission of light-duty automobileTest method for automobile starting performance
Test method for automobile coasting
Measurement method for height of center of gravity of automobile
Test for dustproof sealing of passenger car
Test for rainproof sealing of passenger car
Measurement method for minimum turning diameter of automobilebzxz.net
Road test method for cooling capacity of automobile engine cooling systemTest method for acceleration performance of automobile
Test method for maximum speed of automobile
Test method for fuel consumption of automobile
Test method for thermal insulation and ventilation of automobile
Test method for speedometer and odometer of automobileMeasurement method for main dimensions of automobile
GB/T 12674—90
Measurement method for mass (weight) parameters of automobile
GB/T 12677-90
GB/T 12781--91
GB/T 12782-—91
Method for checking the technical condition of automobiles
Test method for air resistance of automobile fuel supply system
Test method for heating performance of automobiles
GB 14023-92
GB16279-1996
Method for measuring radio interference characteristics of vehicles, motor boats and devices driven by spark ignition engines Performance requirements and test methods for automobile safety belts GB14166--93
GB14167-93 Automobile safety belt fixing point assembly GB14761.1-93 Light-duty automobile exhaust pollutant emission standard GB 14761.4--93
Automobile crankcase pollutant emission standard
GB14761.5--93 Automobile rapid emission standard GB 14761. 6—93
Free acceleration smoke emission standard for diesel vehicles
GB 14761.7-93
All-passenger smoke emission standard for diesel engines for automobilesGB15082—94Speedometer for automobiles
GB 15083--94
GB 15084--94
GB 15085—94
Strength requirements and test methods for automobile seat systemsPerformance and installation requirements for automobile rearview mirrors
Performance requirements and test methods for automobile windshield wipers and washersGB 15086—94
Performance requirements and test methods for automobile door locks and door hinges ZBT24007--89 Structural performance and test methods for automobile brake systems ZBT26001--90 Technical conditions for automobile sun visors JB2146—77 Technical indicators for factory tests of hydraulic components JB4131--85 Photometric performance of turn signal lamps for automobiles and trailers Photometric performance of license plate lamps for automobiles and trailers
JB4150—85
JB 4151—85
Photometric performance of reversing lamps for vehicles and trailers
Appendix C
(Suggestive appendix)
Prototype vehicle registration form
Prototype vehicle number
Prototype vehicle model
Factory date
Odometer reading, km
Engine number
Chassis number
Body (cab) type
Bore×stroke
Engine
Compression ratio
Maximum total power, kW/(r/min）
Maximum torque, N·m/r/min）
Sample vehicle registration form
Transmission system
Suspension system
Steering system
Braking system
Water tank truck
Foam truck
Dry powder truck||t t||Lifting vehicle
Model number
Drive type
Transmission model
Transmission speed ratio
Main reducer speed ratio
Front suspension type
Rear suspension type
Steering gear type
Steering gear speed ratio
Service brake system type
Front wheel brake
Rear wheel brake||t t||Parking brake
Water tank capacity
Water pump flow
Water monitor flow
Water tank capacity
Foam tank capacity
Water pump flow
Water monitor flow
Foam monitor flow
Filling amount of dry powder tank
Drive gas category
Maximum working height
Rated load
GB 16279--1996
Table C1 (end)6—93
Free acceleration smoke emission standard for diesel vehicles
GB 14761.7-93
All-passenger smoke emission standard for diesel engines for automobilesGB15082—94Speedometer for automobiles
GB 15083--94
GB 15084--94
GB 15085—94
Strength requirements and test methods for automobile seat systemsPerformance and installation requirements for automobile rearview mirrors
Performance requirements and test methods for automobile windshield wipers and washersGB 15086—94
Performance requirements and test methods for automobile door locks and door hinges ZBT24007--89 Structural performance and test methods for automobile brake systems ZBT26001--90 Technical conditions for automobile sun visors JB2146—77 Technical indicators for factory tests of hydraulic components JB4131--85 Photometric performance of turn signal lamps for automobiles and trailers Photometric performance of license plate lamps for automobiles and trailers
JB4150—85
JB 4151—85
Photometric performance of reversing lamps for vehicles and trailers
Appendix C
(Suggestive appendix)
Prototype vehicle registration form
Prototype vehicle number
Prototype vehicle model
Factory date
Odometer reading, km
Engine number
Chassis number
Body (cab) type
Bore×stroke
Engine
Compression ratio
Maximum total power, kW/(r/min）
Maximum torque, N·m/r/min）
Sample vehicle registration form
Transmission system
Suspension system
Steering system
Braking system
Water tank truck
Foam truck
Dry powder truck||t t||Lifting vehicle
Model number
Drive type
Transmission model
Transmission speed ratio
Main reducer speed ratio
Front suspension type
Rear suspension type
Steering gear type
Steering gear speed ratio
Service brake system type
Front wheel brake
Rear wheel brake||t t||Parking brake
Water tank capacity
Water pump flow
Water monitor flow
Water tank capacity
Foam tank capacity
Water pump flow
Water monitor flow
Foam monitor flow
Filling amount of dry powder tank
Drive gas category
Maximum working height
Rated load
GB 16279--1996
Table C1 (end)6—93
Free acceleration smoke emission standard for diesel vehicles
GB 14761.7-93
All-passenger smoke emission standard for diesel engines for automobilesGB15082—94Speedometer for automobiles
GB 15083--94
GB 15084--94
GB 15085—94
Strength requirements and test methods for automobile seat systemsPerformance and installation requirements for automobile rearview mirrors
Performance requirements and test methods for automobile windshield wipers and washersGB 15086—94
Performance requirements and test methods for automobile door locks and door hinges ZBT24007--89 Structural performance and test methods for automobile brake systems ZBT26001--90 Technical conditions for automobile sun visors JB2146—77 Technical indicators for factory tests of hydraulic components JB4131--85 Photometric performance of turn signal lamps for automobiles and trailers Photometric performance of license plate lamps for automobiles and trailers
JB4150—85
JB 4151—85
Photometric performance of reversing lamps for vehicles and trailers
Appendix C
(Suggestive appendix)
Prototype vehicle registration form
Prototype vehicle number
Prototype vehicle model
Factory date
Odometer reading, km
Engine number
Chassis number
Body (cab) type
Bore×stroke
Engine
Compression ratio
Maximum total power, kW/(r/min）
Maximum torque, N·m/r/min）
Sample vehicle registration form
Transmission system
Suspension system
Steering system
Braking system
Water tank truck
Foam truck
Dry powder truck||t t||Lifting vehicle
Model number
Drive type
Transmission model
Transmission speed ratio
Main reducer speed ratio
Front suspension type
Rear suspension type
Steering gear type
Steering gear speed ratio
Service brake system type
Front wheel brake
Rear wheel brake||t t||Parking brake
Water tank capacity
Water pump flow
Water monitor flow
Water tank capacity
Foam tank capacity
Water pump flow
Water monitor flow
Foam monitor flow
Filling amount of dry powder tank
Drive gas category
Maximum working height
Rated load
GB 16279--1996
Table C1 (end)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.