HG/T 2664-1995 Reactive Brilliant Red X-4B (Reactive Brilliant Red X-3B)
Some standard content:
Chemical Industry Standard of the People's Republic of China
HG/T2664—95
Reactive Brilliant Red
(Reactive Brilliant Red
1995-04-05 Issued
Ministry of Chemical Industry of the People's Republic of China
X-3 B)
Implementation on 1996-01-01
W Chemical Industry Standard of the People's Republic of China
Reactive Brilliant Red
(Reactive Brilliant Red X-3B)
HG/T2664—95
Replaces HG/T2—806—75
This standard specifies the technical requirements, test methods, inspection rules and various requirements such as marking, packaging, transportation and storage of Reactive Brilliant Red X-4B.
This standard applies to dichloro-s-triazine reactive dyes generated by condensation of H-acid and cyanuric chloride followed by coupling with aniline diazo liquid. It is commercially processed to produce Reaction Red X-4B, which is mainly used for dyeing and printing of cotton, linen, silk, viscose and polyamide fibers. Molecular formula: C19H100N.S2Cl2Na2
Structural formula:
Relative molecular mass: 615.33 (according to the international relative atomic mass in 1991) 2 Reference standards
GB2374 General conditions for dyeing determination GB/T2381 Determination of insoluble matter content in dyes GB/T2383 Determination of sieving fineness of dyes GB/T2386bZxz.net
GB/T2387
GB/T2390
GB/T2391
GB/T2392
GB3920
GB3921
GB3922
GB6152
GB8427
Determination of moisture content in dyes and dye intermediates Reactive dyes Determination method of light intensityDetermination method of pH value of reactive dyes
Determination method of color absorption and fixation rate of reactive dyesDetermination method of thermal stability of reactive dyes
Test method for color fastness of textiles to rubbing
Test method for color fastness of textiles to washing
Test method for color fastness of textiles to perspiration
Test method for color fastness of textiles to hot pressing (ironing)Test method for color fastness of textiles to light (xenon arc test)Test method for color fastness of textiles to chlorinated swimming pool waterGB8433
HG/T2-801Determination method of solubility of reactive dyesApproved by the Ministry of Chemical Industry of the People's Republic of China on April 5, 1995CI
Implementation on January 1, 1996
W.bzsoso,cOn3 Technical requirements
3.1 Appearance: date red uniform powder.
HG/T2664—95
3.2 The quality of Reaction Brilliant Red X-4B shall conform to the requirements of Table 1. Table 1
(1) Strength, denoted
(2) Color light
(3) Water-insoluble matter content, %
(4) Moisture content, %
(5) Fineness (0.2 mm sieve residue), %
(6) Solubility (50°C), g/L
(7) pH value
(8) Color fixation rate, %
(9) Thermal stability (strength reduction), denoted
The color fastness of Reaction Brilliant Red X-4B on cotton fabrics shall not be lower than that specified in Table 2. Table 2
Wash resistance 95℃
(Rat-Xenon arc)
Note: 1/1 standard depth of dyeing is equivalent to 6% (ow). 4 Test method
4.1 Appearance
Visual determination is adopted.
4.2 Determination of dyeing color and intensity
Perspiration resistance
Perform in accordance with the relevant provisions of GB2374 and GB/T2387. Cotton
Resistance to heat pressing
200℃
is 100% of the standard
similar to the standard~slightly
Resistance to chlorine immersion
20mg/L
Resistance to friction
4.2.1 The dyeing depth is 2%, 10g cotton yarn (or 5g cotton cloth), bath ratio 1:20 (cotton cloth 1:40), color absorption temperature 20℃, and color fixing temperature 40℃.
4.2.2 Preparation of dye solution
Weigh 2.000g of the test sample and standard sample (accurate to 0.0005g), place them in 400mL beakers, add a little distilled water to each, mix them into slurry with a glass rod, then add 200mL (30-40℃) distilled water to each, stir well to dissolve the dye completely, cool to room temperature, transfer them to 500mL volumetric flasks, dilute to scale with distilled water, shake well for use. Dye solution preparation (taking 10g cotton 2
W.bzsoso：comHG/T2664-95
yarn as an example) is carried out according to Table 3, and the amount of dye for cotton cloth is halved. Table 3
Dyeing vat number
2g/500mL standard dye solution, mL
2g/500mL sample dye solution, mL
25% sodium chloride solution, mL
20% anhydrous sodium carbonate solution, mL
Add distilled water to total volume, mL
4.2.3 Dyeing operation
a. Color absorption
Add 24mL of 25% sodium chloride solution to the dye solution as specified in Table 3. When the dye solution temperature is 20℃, cool and number the cotton yarn (or cotton cloth) that has been weighed (accurate to 0.01g) and boiled with distilled water for 15min, and immerse them in the dye vat in sequence for dyeing. Stir frequently within the first 15min, lift the dye sample from the liquid surface after 15min, add another 15min each, and dye for 30min in total.
24mL of 25% sodium chloride solution, stir every 5 minutes, continue dyeing. Lift the dyed sample from the liquid surface, add 15mL of 20% anhydrous sodium carbonate solution to fix the color according to Table 3, and heat to the fixing temperature of 40℃ within 20 minutes. Stir frequently when heating, stir every 5 minutes thereafter, and continue dyeing for 25 minutes. Take out after dyeing, wash thoroughly with water, and wring dry. c. Post-treatment
Boil the dyed sample in a soap solution containing 3g/L of neutral soap flakes for 15 minutes (bath ratio 150). Take out and wash with water, clean, wring dry, and dry at 60~～70℃. After cooling, evaluate the color light and intensity according to the relevant provisions of GB2374. 4.3 Determination of water-insoluble content
Carry out according to the provisions of the first article of GB/T2381. 4.4 Determination of moisture
According to the provisions of the second drying method in GB/T2386 (drying temperature is 100-105℃). 4.5 Determination of fineness
According to the provisions in GB/T2383. The standard sieve aperture used is 0.2mm4.6 Determination of solubility
According to the provisions of HG/T2-801.
4.7 Determination of pH value
According to the provisions of GB/T2390.
4.8 Determination of color fixation
According to the relevant provisions of GB/T2391. The color fixation temperature is 40℃. 4.9 Determination of thermal stability
According to the provisions of GB/T2392.
4.10 Determination of color fastness
4.10.1 Color fastness to light is carried out in accordance with the provisions of GB8427. 4.10.2 The color fastness to washing shall be tested in accordance with the conditions of test solution 1 and method 4 in GB3921. 4.10.3
The color fastness to rubbing shall be tested in accordance with the provisions of GB3920. The color fastness to perspiration shall be tested in accordance with the provisions of GB3922. 3
W.bzsoso，cOnHG/T2664—95
4.10.5 The color fastness to hot pressing (ironing) shall be tested in accordance with the provisions of GB6152. 4.10.6 The color fastness to chlorine immersion shall be tested in accordance with the provisions of GB8433. The effective chlorine concentration is 20 mg/L. 5 Inspection rules
5.1 Inspection classification
Items (1) to (7) in 3.1 and Table 1 of this standard technical requirements are factory inspection items, and items (8) and (9) in Table 1 are regular inspection items, which shall be carried out once in each production cycle. All items in the technical requirements of this standard are type inspection items. If one of the six situations specified in Article 6.6.1 of GB1.3 occurs, type inspection should be carried out, and it should be carried out once a year during normal production. 5.2 Sampling method
Random sampling is carried out in batches. For manufacturers, uniform products mixed once are considered a batch, and for users, products with the same batch number received from the same manufacturer are considered a batch. The number of samples shall not be less than VN/2 (N is the number of barrels of each batch of products). If there is a decimal, it shall be rounded up to an integer. The number of samples for small batches shall not be less than 3 barrels. The sampled packaging must be intact. When sampling, do not allow foreign impurities to fall into the product. Use a stainless steel sampler to take samples from the top, middle and bottom respectively. After the sample is fully mixed, take about 200g from it and divide it into two clean and dry ground-mouth bottles, seal them with paraffin, and label them with the manufacturer name, product name, batch number and sampling date. One bottle is for inspection and the other is kept for future reference.
5.3 Manufacturer inspection
Reaction Brilliant Red X-4B is inspected by the quality supervision department of the manufacturer. The manufacturer shall ensure that the quality of all Reaction Brilliant Red X-4B products shipped out of the factory meets the requirements of this standard and shall be accompanied by a quality certificate in a certain format. 5.4 Re-inspection
If the inspection results do not meet the requirements of this standard, samples shall be taken from twice the amount of packaging barrels for re-inspection. Even if only one indicator of the re-inspection result does not meet the requirements of the technical indicators of this standard, the entire batch of products shall be unqualified. 5.5 User Acceptance
The user has the right to verify the received Reaction Brilliant Red X-4B in accordance with the provisions of this standard. When the supply and demand parties have objections to the quality of the product, the two parties may negotiate to resolve the dispute. 5.6 Arbitration
When arbitration is required, the arbitration institution may be selected by agreement of both parties, and the arbitration appraisal shall be conducted in accordance with the methods of this standard. 6 Marking, packaging, transportation, storage
6.1 The packaging barrels should be firmly and clearly marked with the manufacturer's name, product name, registered trademark, production date, batch number, specifications, gross weight, net weight, and each batch of barrels should be accompanied by a product quality certificate with the standard number on it. 6.2 Reaction Brilliant Red X-4B should be packed in iron barrels lined with plastic bags. The plastic bags should be tightly tied and sealed with a cover. 6.3 During transportation, it should be handled with care and fire, sun and rain should be prevented. Do not damage the packaging. 6.4 The product should be stored in a cool, dry and ventilated warehouse. The storage period is one year. Additional remarks:
This standard was proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the technical jurisdiction of the Shenyang Chemical Research Institute of the Ministry of Chemical Industry. This standard was drafted by the Shenyang Chemical Research Institute of the Ministry of Chemical Industry and Songjiang Chemical Plant of Jilin Chemical Company. The drafters of this standard are Gong Shuyan and Zhao Yuzhi. From the date of implementation of this standard, the former standard HG2-806-75 "Reactive Brilliant Red X-3B" issued by the Ministry of Chemical Industry will be invalid.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.