GB/T 4607-1984 Main dimensions and installation of No. 90 traction pins for road semitrailer saddles, interchangeable dimensions
Basic Information
Standard ID:
GB/T 4607-1984
Standard Name: Main dimensions and installation of No. 90 traction pins for road semitrailer saddles, interchangeable dimensions
Chinese Name:
道路车辆 半挂车鞍座90号牵引销主要尺寸和安装,互换性尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1984-07-31
Date of Implementation:1985-05-01
Date of Expiration:2006-06-01
standard classification number
Standard ICS number:Road Vehicle Engineering>>Road Vehicle Devices>>43.040.50 Transmission and Suspension Devices
Standard Classification Number:Vehicles>>Trailers>>T72 Traction Device
Publication information
other information
Review date:2004-10-14
Drafting unit:Changchun Automobile Research Institute
Focal point unit:National Automobile Standardization Technical Committee
Publishing department:National Development and Reform Commission
competent authority:National Development and Reform Commission
Introduction to standards:
GB/T 4607-1984 Road vehicles Semi-trailer saddle No. 90 towing pin main dimensions and installation, interchangeable dimensions GB/T4607-1984 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Main dimensions and mounting/interchangeability dimensions of No. 90 tractor pins for road vehicle semi-trailer saddlesWww.bzxZ.net
UDC629.114.3
GB4607-84
Road vehicles 9ose mi-trailer fifth wheel coupling pin Basic and
mounting/interchangeability dimensions This standard is equivalent to the standard IS04086-1982 "No. 90 tractor pins for road vehicle semi-trailer saddles-Main dimensions and mounting/interchangeability dimensions". This standard applies to tractor pins for semi-trailer saddles with a maximum gross weight (mass) greater than 50t and less than or equal to 100t.
The type and dimensions are specified in Figure 1.
The dimensions of mounting and interchangeability are specified in Figure 2 or Figure 3. R
Additional Notes:
: 3ul
Explosion Control 6202
..+'rh
2116 3
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of Changchun Automobile Research Institute. This standard was drafted by Changchun Automobile Research Institute and the Highway Research Institute of the Ministry of Communications. The main drafters of this standard are
Yu Fanglin and Yang Deyou.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.