JB/T 5824.5-1991 Classification and codes of special equipment for wires and cables
Basic Information
Standard ID:
JB/T 5824.5-1991
Standard Name: Classification and codes of special equipment for wires and cables
Chinese Name:
电线电缆专用设备 产品类别划分与代号
Standard category:Machinery Industry Standard (JB)
state:Abolished
Date of Release1991-10-17
Date of Implementation:1992-10-01
Date of Expiration:2008-11-01
standard classification number
Standard Classification Number:Electrical>>Electrical Production Equipment>>K91 Electrical Material Production Equipment
Publication information
publishing house:Mechanical Industry Press
Publication date:1992-10-01
other information
drafter:Ou Xuecheng, Wang Yuhui
Drafting unit:Shanghai Cable Research Institute
Focal point unit:Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry
Proposing unit:Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry
Publishing department:Ministry of Machinery and Electronics Industry
Introduction to standards:
This standard specifies the classification and code of wire and cable special reels and dies. This standard applies to the compilation of wire and cable special reels and metal wire drawing die product models JB/T 5824.5-1991 Wire and cable special equipment product classification and code JB/T5824.5-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
Special Equipment for Wires and Cables
Product Category Classification and Code
Part 5 Reels and Dies
1 Subject Content and Scope of Application
1.1 This standard specifies the classification and code of special reels and dies for wires and cables. 1.2 This standard applies to the preparation of product models of special reels and metal wire drawing dies for wires and cables. JB/T5824.5-91
1.3 The preparation of product models of reels and dies shall comply with the requirements of JB/T5824.1-91 "Classification and Code of Special Equipment for Wires and Cables
Part 1 General Provisions".
Classification and Code
The classification and code of reels shall comply with the provisions of Table 1. 2.1
The classification and code of dies shall comply with the provisions of Table 2. 2.2
Table 1 Plate
Carbide
Approved by the Ministry of Machinery and Electronics Industry on October 17, 1991
For winding wire
For cable delivery
Metal wire drawing die
Non-ferrous metal rod
Large shaft hole
Small shaft hole
Cylindrical
Conical
Non-metal
1992—10-01Implementation
JB/15824.5||t t||Continued Table 2
Non-ferrous metal barsbzxz.net
Square and rectangular steels
Square and rectangular non-ferrous
Hexagonal steels
Hard alloy
Hexagonal non-ferrous
Metal materials
Non-ferrous metals
Non-ferrous metal wires
Natural diamond
Non-ferrous metal wires
Artificial diamond
Additional notes:
This standard was proposed and managed by the Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Shanghai Cable Research Institute and other units. The main drafters of this standard are Ou Xuecheng and Wang Yuhui. 120
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.