title>GB/T 3921.3-1997 Textiles - Tests for colour fastness - Colour fastness to washing: Test 3 - GB/T 3921.3-1997 - Chinese standardNet - bzxz.net
Home > GB > GB/T 3921.3-1997 Textiles - Tests for colour fastness - Colour fastness to washing: Test 3
GB/T 3921.3-1997 Textiles - Tests for colour fastness - Colour fastness to washing: Test 3

Basic Information

Standard ID: GB/T 3921.3-1997

Standard Name: Textiles - Tests for colour fastness - Colour fastness to washing: Test 3

Chinese Name: 纺织品 色牢度试验 耐洗色牢度:试验3

Standard category:National Standard (GB)

state:Abolished

Date of Release1997-06-09

Date of Implementation:1997-12-01

Date of Expiration:2008-12-01

standard classification number

Standard ICS number:Textile and leather technology>>Textile products>>59.080.01 Textile products in general

Standard Classification Number:Textile>>General Textile>>W04 Basic Standards and General Methods

associated standards

alternative situation:Replaced part of GB 3921-1983; replaced by GB/T 3921-2008

Procurement status:eqv ISO 105-C03:1989

Publication information

publishing house:China Standards Press

ISBN:155066.1-14302

Publication date:1997-12-01

other information

Release date:1983-11-07

Review date:2004-10-14

drafter:Qi Yamin, Xu Jieshou, Lu Wenbao, Li Ming, Hu Minmin

Drafting unit:China National Textile and Apparel Council Standardization Institute, Shanghai Textile Standards and Metrology Institute, Shanghai Wool and Linen Textile Science and Technology Research Institute

Focal point unit:National Technical Committee on Textile Standardization

Proposing unit:China Textile Federation

Publishing department:State Bureau of Technical Supervision

competent authority:China National Textile and Apparel Council

Introduction to standards:

This standard specifies the third test in a series of five tests for color fastness to washing and has been established as a test method for color fastness to washing of colored textiles. This series of tests covers a range of washing operations from mild to severe. GB/T 3921.3-1997 Textiles - Tests for color fastness - Color fastness to washing: Test 3 GB/T3921.3-1997 Standard download decompression password: www.bzxz.net

Some standard content:

1Cs±59, 080. 01
National Standard of the People's Republic of China
GB/T 3921. 3—1997
egy 1s 105-3:1989
Textiles
Tests for colour fastness
Colour fastness to washing: Test 3
Textiles-Tests for colour fastnessColour fastness to washing: Test 31997-06-09Released
Kitchen Technology Blue Supervision Bureau
1997-12-01Implementation
G8/T3921.3—1997
Standard equivalent to 1S()105-C03;7989. This standard is one of five appendices to the standard for color fastness test methods. This standard has made the following changes to GB392[83: 1. The cover and the format of the text are modified according to GB/T1.1-1993, and 7 foreword and 1SO are added. Three reference scales are added and the recommendation of three external test instruments is deleted. Synthetic detergents are listed in the appendix. 2. The length of the single test piece is changed to mm.
3. Thin water is changed to continuous water, and
small fabric test piece is changed from the west side to the short side. If necessary, it shall be specified separately. 5. The combination of multi-fiber pasting and single fiber pasting is added. This standard replaces the small and medium method B8921-83 from the date of implementation. 3. This standard is proposed by the China Textile General Association.
This standard is proposed by the China Textile General Association! The Standardization Institute of China National Textile and Apparel Council, Shanghai Textile Standards Institute, Tuhai Textile Science and Technology Research Institute are responsible for drafting, and Shanghai Silk Science and Technology Research Institute is responsible for co-drafting. The main contributors of this standard are Qi Zhimin, Xu Jie, Lu Anbao, Shi Ming, and Hu Minmin. This standard was first issued in 1933. This standard is entrusted to the Standardization Institute of China National Textile and Apparel Council for interpretation. G#/T3921.3—1997 ISO Foreword ISO (International Organization for Standardization) is an international alliance of national standards organizations (ISO members). The preparation of international standards is usually carried out by ISO technical committees. Members have the right to propose committees if they are interested in items for which technical committees have been established. Official and unofficial international organizations have established contacts with ISO and may work with ISO. ISO is closely connected with the International Electrotechnical Commission (IEC) in all matters related to electrotechnical standardization. The draft international standards prepared by the ISO/TC3B Technical Committee are passed on to members, and more than 75% of them are published as international standards. International Standard 190105-C03 was developed by ISO/TC3B Technical Committee. This fourth edition is a technical revision of the second edition and replaces the third edition (1SC105-C.031987). 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 1SC105-C.031987) 105-c03:1989
代蓉CR392183:
This standard specifies the third test in a series of five color fastness tests and has been developed to supplement the test method for color fastness to washing of colored fine fabrics. This series of tests includes the following and the test of the washing operation range. Note that this method is only formulated to measure the effect of washing on the color fastness of fabrics and does not reflect the results of all washing operations. 2 Applicable standards
The provisions contained in the following standards will become the provisions of this standard when they are cited in this standard. The version of this standard is valid. All standards will be revised. Parties using this standard should explore the possibility of using the new version of the following standards. GB250-1955 Assessment of color change Use gray sample card (idt150105-402, 1993) GB251-1595 gray sample for evaluating color fastness (i[S]115A31993) GB/T6151-1097 General rules for color fastness test of nano fabrics (eq1S)105-A011594) GB7564~7566--87 Standard test for color fastness of products (ncgIS ()105-F: 1985) CB11404-89 Fabric color test fiber adhesive fabric specification 0g1501C5-F10: 19893 Processing
The nano fabric sample is combined with one or two pieces of specified paper, placed in soap, and stirred under the specified time and temperature conditions, and then washed. Wash and dry. Use the grey scale to evaluate the discoloration of the sample and the staining of the lining: 4 Equipment and reagents
4.1 Suitable mechanical equipment (Appendix A) consists of a water-swimming worm with a rotating shaft, which supports a number of stainless steel containers with a capacity of 550mL±50mL, with a diameter of 75mm±5mm and a height of 125mm±10mm. The distance from the axis to the bottom of the container is 45m±10mm, and the rotation speed of the shaft and container is 40r/min±21/min. The water temperature is automatically controlled. The test solution is maintained at 60±2°C.
4.2 The water content does not exceed 5%6, and the following requirements must be met (measured as follows): free alkali (as NaCO , calculated
free alkali (calculated as NaOH)
total fat
prepared fertilizer mixed fatty acid aging point
21 generation police GB3921-33 China 3
State Technical Supervision Bureau 1997-06-09 approved
0.3% (maximum)
0.1 maximum)
850g (minimum)
30C (high)
50 (maximum)
1997-12-01 implementation
Fertilizer density should not contain waste light increase self-thorn.
GA/T3921.3-1997
4.3 soap solution per liter of water 4.) Contains 5B climbing soap (4.2) and 2B anhydrous carbonyl sodium. 4.4 Fabrics for interlacing with GB/T6151--109, 8.41, according to 4.4.1 or 4.4.2, any one of which is optional -1.4.1 Multi-fiber interlacing fabrics that conform to CB 114C4. 4.4.2 Single fiber interlacing fabrics that conform to the relevant standards of GB7564-7558. The first piece is made of the same fiber as the sample, and the second piece is made of the specified fiber. If the sample is a blended product, the first piece is made of the main fiber, and the second piece is made of the secondary fiber. Otherwise specified. Table 1 Single fiber interlacing structure
The first piece is,
Polyamide
Polyolefin
4.4.3 If necessary, use a piece of uncolored fabric (such as nylon). The second decision is
single wool blowing fiber
wool blowing cotton
wool or cotton
4.5 Evaluation of wide color family color scale, in accordance with GB250; evaluation of staining with gray sample scale: should comply with food C251.4.6-grade water (according to GB/T6151--1997.8.1). 5 Test sample
5.1 If the sample is a fabric, prepare the sample by one of the following methods:) Take a 40mm×1m1rl test sample. The front side is 40m×100mm of the multi-fiber sealed fabric (4.4.1) connected to the edge chain (glass is made separately) to form a combined test. b) Take a 4mm×100mm test piece and sandwich it between a 40mm×10cm single fiber sealed fabric (4.4.2): along a wall (or as otherwise specified), form a combined sample. 5-2 If the sample is a 40mm×100mm multi-fiber adjacent fabric, take a 40mm×100mm multi-fiber adjacent fabric and a 40mm×100mm undyed fabric (4.4.3), and combine them side by side (according to GB/T61511997.9.3.3.4) to form a combined sample. b) Place it between two 4Umm×1H specified single fiber adjacent fabrics, and combine them in reverse order to form a combined sample. 6 Operating Procedures
6.1 Place the assembled sample in a container and inject the required amount of liquid preheated to 63℃±2 minus (4.3) to make the bath ratio 5F11.6.2 Treat the combined test sample at 60 + 2 ° C for 30 minutes. 6.3 Take out the test sample, wash it twice with cold third-grade water (4.6), and then rinse it in running cold water for 10 minutes. Squeeze out the water, unfold the test sample, make sure the test sample is connected only by one connection (if necessary, disconnect all connections), and finally ignite it in air at a temperature not exceeding 60 ° C. 6.4 Use the Dongzhe sample card (4.5) to assess the discoloration of the test specimen and the staining of adjacent fabrics. 7 Test report The test report shall include the following parts: 1) the abbreviation of this standard, i.e. B/T 3921.3-1997 2) the specific specifications of the test specimens required; 3) the test discoloration degree, i.e. CB/T 3921.3-1997 4) the test discoloration degree of the test specimens; 5) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 6) the test discoloration degree of the test specimens; 7) the test report shall include the following parts: 8) the abbreviation of this standard, i.e. B/T 3921.3-1997 9) the specific specifications of the test specimens required; 10) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 11) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 12) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 13) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 14) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 15) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 16) the test discoloration degree of the test specimens, i.e. CB/T 3921.3-1997 17) the test discoloration degree of the test specimens, CB/r3921.3-1997
Attached to your shop
(recommended notes)
Test equipment
41 The test equipment used in this standard is SW-12, S-2, S-4 acid fastness test machine. See the National Science and Technology Commission's Scientific and Technological Research Certificate 800740,
A? Other test equipment with the same results specified in Certificate 41 can also be used Appendix R
(recommended notes)
Combined detergentbzxZ.net
If necessary, a detergent containing 1g/L and anhydrous special acid 1g/L can be used instead of B/anhydrous sodium carbonate 2g/. Components of paper detergent:
Alkaline benzene acid (breakdown uniformity)
Alkyl alcohol ethyl condensation number (cyclohexane number 14) (C~-C1 complex-26%C-4-57) sodium phosphate
Sodium sulfate (S/N=3.3/)
2. Sodium disodium phosphate
Sodium sulfate
4 (m/m) (±2%)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.