本标准规定了针织民用手套号型、产品分类、要求、试验方法、判定规则、产品使用说明、包装、运输、贮存。 本标准适用于鉴定各类纤维编织的经编、纬编针织民用手套的品质。

ICS59.080.30
Textile Industry Standard of the People's Republic of ChinaFZ/T 73047—2013
Knitted civil gloves
针织民用手套
（EnglishTranslation)
Issuedate:2013-10-17
Issuedby
Implementationdate:2014-03-01Ministry of Industry and Information Technology of the People's Republic of Chinatps://reader.doc88.com/2id=493293313734521Scope
This standard specifies the size,requirements,test methods,judgemen rules,instructionsforuse,packaging, transportation and storage for knitted civil gloves.This standard is applicable to knitted civil gloves mainly made of various textile fibers by knitting orsewing.
2 Normative references
Thefollowing referenced documents are indispensable for the application of this document.For datedreferences,onlytheeditioncitedapplies.Forundatedreferences,thelatesteditionofthereferenceddocument (including any amendments) applies.GB/T25o,Textiles—Testsforcolourfastness—GreyscaleforassessingchangeincolourGB/T 2910 (all parts), Textiles -—Quantitative chemical analysisGB/T 2912.1,Textiles -Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde(waterextractionmethod)
GB/T3920,Textiles-Tests for colour fastness—Colour fastness to rubbingGB/T 3921-2008,Textiles - Tests for colour fastness -Colour fastness to washing with soap or soap andsoda
GB/T 3922,Textiles - Tests for colour fastness -Colour fastness to perspirationGB/T4856,Package of cotton goods and knitwearGB 5296.4,Instructions for use of products of consumer interest—Part 4: Textiles and apparelGB/T5713,Textiles-Tests for colour fastness-Colourfastness towaterGB/T 6529,Textiles—Standard atmospheres for conditioning and testingGB/T 7573,Textiles-Determination of pHofaqueous extractGB 9994,Conventional moisture regains of textile materialsGB/T17592,Textiles—Determination ofthe banned azo colourantsGB18401,Nationalgeneral safety technical codefortextileproductsFZ/T01026,Textiles-Quantitative chemicalanalysis-MultinaryfibremixturesFZ/T01053,Textiles-Identification offibercontentFz/T 01057 (all parts)Test method for identification of textile fibersFZ/T01095,Textiles-Testmethod ofelastanefibre contentGSB16-2159,Colour cards of standard depths for knitted products (1/12)GSB 16-2610,Defectappearancereplicasof hosiery3Glovesize
FZ/T73047—2013
The length of palm in millimeters, which is the basis of design of the glove length.3.2
The width of palm in millimeters, which is the basis of design of the glove width.3.3
size and type specification
The size and type can be expressed by palm length and palm width in millimeters, and mark the \man\\woman\ or\children\.Take an example for man, the palm length is 160mm, the palm width is 80mmwhich can be expressed 160/80 man as the glove sizeandtype. And another example for woman, 150mmis palm length, 75mm is palm width, which can be expressed 150/75 womanas the glove sizeandtypeFor the gloves with elastic, the applicable palm length and palm width in millimeters can be expressedasthe sizeandtype.Gradationfor size is10mm,gradationfortypeis 5mm,increase ordecreasein termsof1ommor5mm,seeAnnexA.
4Requirements
4.1 Contents
Requirements include internal quality and appearance quality. Appearance quality includes thespecification tolerance, appearance defects, sewing requirement. Internal quality includes theformaldehydecontent,pHvalue,decomposablecarcinogenicaromaticaminedyes,odor,colourfastnesstowater,colourfastness to perspiration,colourfastness torubbing,colourfastness towashing,fibercontent,etc.
4.2Grading criteria
4.2.1 The quality of knitted civil gloves is classified by pairs, and the quality grade is divided into firstgrade and qualified grade.
4.2.2 Classification of internal quality is based on batch, and. classification of appearance quality isbased on pairs,assessed bythelower gradeforcombination ofboth.4.3Appearancequalityrequirements4.3.1 When the different grades of defects are found on the same pair of product, it shall be gradedaccordingtothelowergrade.下载标准就来标准下载网
4.3.2 The measuring positions are shown in figure 1 and the measuring methods are given in table 1forthe specification.
Description：
1-Hand length of glove;
2-Hand width of glove
Position
Hand length of glove
Hand width of glove
Figure 1 The measuring positions of specificationTable 1 The measuring method of specificationMeasuring method
FZ/T73047—2013
Straightline distance from the midpoint connecting the lateral line of the radial styloidpoint to the ulnar styloid point to the tip of the middle finger.Straight line distance from lateral metacarpal point to ulnar metacarpal point.4.3.3 Specification tolerance, see table 2.Table 2 The specification toleranceItem
Hand length of glove
Hand width of glove
First grade
4.3.4 Appearance defects requirements, see table 3.Table3AppearancedefectsrequirementsNo.
Defectsname
Skipped stitching
Broken hole, mending scar,
missed stitching, broken elasticColour difference
Dyeing defect, oil stain, colourspot, staining, mending mark,inconsistent oftightness of ribcuff, inconsistent sewing
tightness of glove mouth, theheight and low of glove hem
The deformation pattern
Inconsistent lengthand widthThread end
Elastic yarn exposed
Elastane exposed
Tuck stitching
Unsmooth fingers
Surplus thread residue of insideoffingertip
First grade
Notallowed
Qualified grade
Qualifiedgrade
One stitching is allowed for one gloveNotallowed
Grade 4-5 is allowed for thesamepair
Allowed if slight
Allowed if slightly affect
appearance
Within 5mm is allowed for
the samepair
Allowed within 5mm
Notallowed
5mm cumulative 1 turn,
slightly allowed
The two slight tuck stitchingis allowed for one glove
Allowed if slight
Allowed within 5mm
Grade 4 is allowed for the same pairAllowed if obvious
Allowed ifobviouslyaffectappearance,butapairof similar
Within 5mm ~10mmis allowed forthesamepair
Allowed within 10mm
Allowed if slight
5mm cumulative 3 turn, obviously allowedThe three obvious tuck stitching is allowedforoneglove
Obvious is allowed, significant is notallowed
Allowed within 10mm
Note 1:It shall be measured by the longest length when measure the length of appearance defect.Note 2:The surface defect shall be classified according to GSB16-2610.Note 3:The description of defect degree:Slight: Not obvious but it can be noticed with careful observation.-Obvious:Easytobenoticed,butnotaffectingtheoverallappearance.Severe: Easy tobe noticed, destructive defect or affectingthe overall appearance.FZ/T73047—2013
4.3.5 Sewing requirement: The stitching part of the glove is round and smooth, and the seam part shallnot ladder when stretched.
4.4 Internal qualityrequirements4.4.1 Internal quality requirements see table 4.Table 4 Internal quality requirementsItems
Formaldehydecontent/ (mg/kg)pHvalue
Decomposablecarcinogenicaromaticaminedyes/(mg/kg)odors
Colour fastness to water/ (grade)>Colourfastness to perspiration/ (grade)≥Colour fastness to rubbing/ (grade)≥Colour fastness to washing/ (grade)2Fibercontent/%
Change in colour
Staining
Change in colour
Staining
Change in colour
Staining
Firstgrade
Qualifiedgrade
Meet the requirements of GB 184013-4
3 (dark 2-3)
Meet the requirements of FZ/T 01053Note: Colour depth classification is according to GSB16-2159: The colour darker than 1/12 standard depth isregarded as dark colour, and the other colour is regarded as light colour.4.4.2 The lowest test result shall be taken as the basis for the evaluation of this batch of products forinternal quality index.
5Testmethods
5.1 Sampling quantity
5.1.1 The appearance quality shall be randomly sampled at 1%~3% according to category, colour andsizeof batch, with no less than 20 pairs. If the quantity is less than 20 pairs, the whole quantities shall beinspected.
5.1.2 Internal quality shall be randomly sampled 10 paris according to category, colour and size of batch.In case of shortage, the quantitiesof samples can be increased.5.2Appearancequalityinspectioncondition5.2.1 Generally, it is inspected by light with a daylight lamp of 40w blue light or white light, put alampshade on it. The vertical distance between the lampshade and the center of the inspection table is50cm+5cm.Or it is inspected under the D65 light source.5.2.2 If indoor natural light is used, the direction of light is north to the left or right corner, the lightshould not reach the product directly.5.2.3The specification should bemeasured withoutexternaltension.5.2.4 The product shall be placed evenly on the inspection table with a layer of white cloth on the surfacewhen inspected. The sight of inspectors shall face the surface of the product with a visual distance ofmorethan35cm.
5.3 Preparation and condition for testing5.3.1 The sample for internal quality shall not have defects that affect the accuracy of the test.5.3.2 The sample shall be humidified according to the standard atmosphere GB/T 6529, and the testshall be conducted after the conditioning5.4 Test items
5.4.1 Specification test
5.4.1.1 Test tool: the length of measuring scale should be larger than the test length, accurate to 0.1cm.5.4.1.2 Test operation, the measuring position is specified as shown in figure 1.5.4.2 Formaldehyde content
Formaldehyde content shall be tested according to GB/T 2912.1.5.4.3 pH value
pHvalueshallbetested accordingtoGB/T75735.4.4 Decomposable carcinogenic aromatic amine dyesDecomposable carcinogenic aromatic amine dyes shall be tested according toGB/T 17592.5.4.5odors
OdorsshallbetestedaccordingtoGB18401.5.4.6Colourfastnesstests
5.4.6.1 Colour fastness to waterColour fastness to watershall be tested according to GB/T 5713.5.4.6.2 Colour fastness to perspirationColourfastness to perspiration shall betested according toGB/T39225.4.6.3Colour fastness torubbingColour fastness to rubbingshall be tested according to GB/T3920. Only test on the length direction.5.4.6.4 Colour fastness to washingColour fastness to washingshall be tested according to method A(1) of GB/T 3921—2008.5.4.7RatingofcolourdifferenceRating of colourdifferenceshall be tested according to GB/T250.5.4.8Fiber content
Fiber content shall be tested according to GB/T 2910, FZ/T 01057, FZ/T 01026 and FZ/T 01095.Theresult is calculated according to convention moisture regain in GB 9994. Palm part is recommendedtotest.
6 Judgment rules
6.1Appearancequality
The rate of product non-conformity of appearance quality shall be calculated according to category,colour and size, in pairs of unit.If the rate of product non-conformity is more than 5.0%, or broken holeand missed stitching is more than 3.0%, the batch of products shall be judged as unqualified6.2Internal quality
6.2.1 The result of the fiber content, formaldehyde content, pH value, odors and decomposablecarcinogenic aromatic amine dyes are qualified, the batch of products shall be judged as qualified.Otherwise, they shall be judged as unqualified.FZ/T73047-2013
6.2.2 The result of the colour fastness to water, colour fastness to perspiration, colour fastness torubbing and colour fastness to washing are qualified, the batch of products shall be judged as qualifiedOtherwise,thebatch of products shall be judged as unqualified by colour seperation.6.3Re-inspectionrules
6.3.1 If there is dispute on the result from any party, the re-inspection can be carried out6.3.2 The result of re-inspection shall be conducted according to 6.1 and 6.2, whichshallprevial in thejudgement.
7 Instructions for use, packaging, transportation and storage7.1 The instructions for use shall conform to GB 18401 and GB 5296.4.For the size, marking the palmlength and palm width in millimeters with the \man\, \woman\ or \children\.7.2 The product packaging should be carried out in accordance with GB/T 4856 or agreement7.3 Products shall be fireproof, moisture-proof and anti-pollution when packed and transported7.4 Products shall be stored in a cool, ventilated, dry and clean warehouse, and prevent from mildew andmoth.
AnnexA
(Normative)
Glove sizeandtype
A.1 The glove size andtypefor man, see table A.1.Table A.1The glove size and type for manSize
A.2 The glove sizeandtype for woman, see table A.2.Type
Table A.2 The glove size and type for womanSize
A.3 The glove size andtypefor children, see table A.3Type
Table A.3 The glove size and type for childrenSize
FZ/T73047—2013
Unit:mm
Unit: mm
Unit:mm
A.4 The size of elastic glove shall be marked the applicable palm length and palm width correspondingtothis annex.
小提示：此标准内容仅展示完整标准里的部分截取内容，若需要完整标准请到上方自行免费下载完整标准文档。