SJ/T 10224-1991 Graphics and symbol library for CAD drawing of electronic product drawings Standard structural parts graphics SJ/T10224-1991 standard download decompression password: www.bzxz.net

Industry standard of electronic industry of the People's Republic of China SJ/T10224-91
Graphic library of electronic components
Standard structural part graphics
Published on May 28, 1991
Implementation on December 1, 1991
Published by the Ministry of Machinery and Electronics Industry of the People's Republic of China Industry standard of electronic industry of the People's Republic of China Graphic and symbol base for electronic products CAD drawing Standard structural part graphics
Graphic and Symbol base for electronic Products CAD drawing Standard architecture part graphic 1 Subject content and scope of application
SJ/T10224—91
This standard specifies the design specifications for standard structural part graphics in the graphic and symbol library for electronic product drawings using CAD (computer-aided design).
This standard applies to CAD drawing of electronic product drawings 2 Reference standards
GB4457.4 Mechanical drawing
3 Terms
Mechanical drawing
Mechanical drawing
Mechanical drawing
3.1 Standard structural parts
Standard architecturepart
Drawing method
Axonometric drawing
Drawing method of threads and threaded fasteners
Refers to structural parts produced according to current national standards, industry (department) standards and enterprise standards, and with model specifications. 3.2 Attribute
attribute
Text data items used to describe the characteristics of standard structural parts. 3.3 Category
Classification according to different functions of standard structural parts. 3.4 Subclass
Subtype
Classification according to graphic characteristics in the same category is called subclass. 3.5 Layer
Approved by the Ministry of Machinery and Electronics Industry of the People's Republic of China on May 28, 1991 and implemented on December 1, 1991
SJ/T10224—91
The level of classification management of graphic structure data by the CAD system. 3.6 Locating point
Locating point
The base point when the standard structural part graphic is called out. 4 Standard structural part graphic structure
The standard structural part graphic structure consists of two parts: its attributes and views, and it is required that the graphics established in this way can draw the drawings of electronic products.
4.1 Block diagram of the standard structural part graphic structure
The block diagram of the standard structural part graphic structure is shown in Figure 1. Graphic structure of standard structural parts
Model specification
Standard code
Main view
Other views
Location point
Axonometric drawing
Figure 1 Block diagram of the graphic structure of standard structural parts
4.1.1 Properties of the graphic structure of standard structural parts The left part of Figure 1 specifies the properties of standard structural parts, including category, subcategory, name, standard code and model specification.
4.1.2 Views of the graphic structure of standard structural parts The right part of Figure 1 specifies the views of standard structural parts, including main view, other views, location points and axonometric drawing. Other views can be right view, left view, top view, sectional view, etc. According to the needs of drawing electronic product drawings, you can select only one view or select several views at the same time. 4.2 Tabular representation of the graphic structure of standard structural parts The various parts in Figure 1 can be represented by a table. The format of the table is shown in Table 1. The graphic structure of a standard structural part is represented by one or more graphic structure description tables. See Appendix A (reference) for application examples.
SJ/T10224—91
Layering principles and methods of standard structural parts graphic structure 5.1 Layering principles
The layering of standard structural parts graphic structure should be conducive to the management of graphic library; it is conducive to the drawing of electronic product drawings and the extraction of data.
5.2 Layering methods
The standard structural parts graphic structure contains many graphic elements with different properties. According to the layering principles, these graphic elements are stored in different layers of the graphic library. For example: a
Screws, self-tapping screws, wood screws and bolts can be layered according to the head and screw parts; washers can be layered according to the outer contour and inner hole; welding pieces can be layered according to the fixing holes and other graphics, and the attributes can be layered according to the name, standard code, model specification. Table 1 Graphic structure description table of standard structural parts
Standard code
Model specification
X view and positioning point
Filling in the graphic structure description table of standard structural parts 6
6.1 Attributes
6.1.1 "Category" column
SJ/T10224—91
Fill in the category name of the standard structural parts, which are: 8
Screws;
Self-tapping screws;
Wood screws;
Bolts;
Studs,
Nuts;
Washers;
Retaining rings;
Rivets;
Fasteners assemblies,
Welding pieces;
Bearings;
Profiles;
p. Others.
6.1.2 "Subclass" column
Fill in the subclass name of the standard structural part category. 6.1.2.1 Subclass of screws
Subclasses of screws can be divided according to the head shape or slotting method. 6.1.2.1.1 According to the head shape:
Cylindrical head screws;
Pan head screws:
Countersunk head screws:
Half-countersunk head screws,
Headless screws;
Hexagon head screws;
Square head screws,
Knurled screws,
Other screws.
6.1.2.1.2 According to the slotting method, it can be divided into:
slotted screws,
b. cross slot screws;
hexagon socket head screws:
hexagon socket flower head screws,
e. other screws.
6.1.2.2 Subcategories of self-tapping screws
SJ/T10224—91
Self-tapping screws can be divided into subcategories according to the slotting method, head shape, cross-sectional shape of the screw shaft or tail end type. 6.1.2.2.1 According to the slotting method, it can be divided into:
a. cross slot self-tapping screws,
slotted self-tapping screws;
hexagon socket self-tapping screws;
hexagon socket flower head self-tapping screws;
other self-tapping screws.
6.1.2.2.2 According to the shape of the head, they are divided into:
Pan head tapping screws;
Countersunk head tapping screws:
Semi-countersunk head tapping screws;
Cylindrical head tapping screws;
Hexagonal head tapping screws;
Big spherical tapping screws;
Big spherical flange tapping screws;
Other tapping screws.
6.1.2.2.3 According to the cross-sectional shape of the screw, they are divided into: a.
Tapping screws;
Tapping locking screws.
6.1.2.2.4 According to the tail end type, they are divided into:
Type C;
Type F;
Type FT.
Subclasses of wood screws:
Countersunk wood screws:
Semi-countersunk wood screws;
Round head wood screws;
Hexagon head wood screws;
Other wood screws.
Subclasses of bolts:
Hexagon head bolts;
Hexagon flange bolts;
Square head bolts;
Countersunk bolts,
Semi-round head bolts,
Other bolts.
6.1.2.5Subclasses of studs
Stud studs;
Equal length stud studs:
Other studs.
Subclasses of nuts
Hexagonal nuts;
Square nuts;
Round nuts;
Hexagonal slotted nuts;
Lock nuts:
Insert nuts:
Butterfly nuts,
Dredge nuts,
Cap nuts;
Other nuts.
Subclasses of washers
Flat washers;
Spring washers;
Elastic washers;
Lock washers;
Retaining washers;
Open washers;
Square bevel washers;
Other washers.
Subclasses of retaining rings
Locking retaining ring,
Shaft shoulder retaining ring;
Shaft end retaining ring;
Elastic retaining ring;
Wire retaining ring;
Open retaining ring;
Other retaining rings.
Subclasses of pins
Open pins:
Cylindrical pins;
Taper pins,
Pin pins;
Other pins.
6.1.2.10 Subclasses of rivets
SJ/T10224-91
Subclasses of rivets can be divided according to the shape of the head or the structural characteristics. 1 According to the shape of the head, they are divided into:
6. 1.2. 10. 1
semi-round head rivets;
flat cone head rivets;
countersunk head rivets;
semi-countersunk head rivets;
flat head rivets,
flat head rivets;
other rivets.
6.1.2.10.2 According to the structural characteristics, they are divided into: a.
ordinary rivets,
hollow rivets:
headless rivets;
sign rivets;
other rivets.
Subclasses of fastener assemblies
Screw and flat washer assemblies;
Screw and spring washer assemblies:
Screw and lock washer assemblies;
SJ/T10224-91
Screw, spring washer and flat washer assemblies; self-tapping screw and flat washer assemblies;
Self-tapping screw and lock washer assemblies;
Other fastener assemblies.
6.1.2.12Subclasses of solder tabs
Flake solder tabs;
Positioning solder tabs,
End sleeve solder tabs:
Crimp solder tabs;
Other solder tabs.
Subclasses of bearings
Radial ball bearings;
Radial spherical ball bearings;
Radial short cylindrical roller bearings;
Radial spherical roller bearings;
Long cylindrical roller bearings and needle roller bearings;
Spiral roller bearings;
Radial thrust ball bearings;
Tapered roller bearings;
Thrust ball bearings and thrust radial ball bearings; Thrust roller bearings and thrust radial roller bearings; Other bearings.
Subclasses of keys
Flat keys;
Semi-circular keys;
Wedge keys;
Splines;
Tangential keys;
Other keys.
Subclasses of profiles
Angle profiles;
Groove profiles;
I-shaped profiles;
Z-shaped profiles;
T-shaped profiles;
f. Other profiles.
6.1.3 “Name” column
Fill in the name of the standard structural part.
6.1.4 "Standard Code" column
Fill in the product standard code of the standard structural parts. 6.1.5 "Model Specification" column
Fill in the model and specification of the standard structural parts. View
SJ/T10224—91
Fill in the view name in the ×× of the "× View" column, and draw the graphics in the blank space. The view should meet the following requirements: the drawing lines should comply with the provisions of GB4457.4;
The drawing method should comply with the provisions of GB4458.1;
The drawing method of fasteners should comply with the provisions of GB4459.1; The drawing method of axonometric drawings should comply with the provisions of GB4458.3. d.
Fill in the positioning point in a view and indicate it with "×". When the positioning point is aligned with the cross groove of the screw When they overlap, the symbol is omitted. For specific applications, see Appendix A (reference). 8
SJ/T10224-91
Appendix A
Examples of graphic structure description of standard structural parts (reference)
A1 Examples of the graphic structure of a standard structural part represented by a graphic structure description table, see Table A1 to Table A15. A2 Examples of the graphic structure of a standard structural part represented by several graphic structure description tables, see Table A16 to Table A18. These three tables and Table A1 represent the graphic structure of the same standard structural part. Table A1 Graphic structure description table of slotted cylindrical head screws Category
Standard code
Model specification
Main view and positioning point
Slotted cylindrical head screws||tt| |GB65--85
M8×30
Planting screw
SJ/T10224—-91
Table A2 Cross recessed large spherical flange self-drilling locking screw Graphic structure description table Category
Standard code
Model specification
Main view and positioning point
Standard code
Model specification
Mountain and positioning point
Self-drilling screw
Cross precision large spherical flange self-drilling locking screw SJ2832--87
ST4X16
Table A3 Slotted countersunk wood screw Graphic structure description table Wood screw
Slotted countersunk wood screw
GB100--86
Self-drilling lock Tightening screws
Countersunk wood screws
Standard code
Model specification
Main view and positioning points
Standard code
Model specification
Main view and positioning points
SJ/T10224—91
Table A4 Graphic structure description of hexagonal head flange bolts
Hexagonal head flange bolts
GB5789—86
M8×30
—Enlarged series
Table A5 Graphic structure description of studs
Stud stud bm=1.5d
GB899-88
AM8M8X30
Hexagonal head bolts
Stud studs12 Subclasses of welding pieces
Flake welding pieces;
Positioning welding pieces,
End sleeve welding pieces:
Compression welding pieces;
Other welding pieces.
Subclasses of bearings
Radial ball bearings;
Radial spherical ball bearings;
Radial short cylindrical roller bearings;
Radial spherical roller bearings;
Long cylindrical roller bearings and needle roller bearings;
Spiral roller bearings;
Radial thrust ball bearings;
Tapered roller bearings;
Thrust ball bearings and thrust radial ball bearings; thrust roller bearings and thrust radial roller bearings; other bearings.
Subclass of key
Flat key;
Semi-circular key;
Wedge key;
Spline;
Tangential key;
Other keys.
Subclass of profile
Angle profile;
Groove profile;
I-beam profile;
Z-beam profile;
T-beam profile;
f. Other profiles.
6.1.3In the “Name” column
Fill in the name of the standard structural part.
6.1.4 "Standard Code" column
Fill in the product standard code of the standard structural parts. 6.1.5 "Model Specification" column
Fill in the model and specification of the standard structural parts. View
SJ/T10224—91
Fill in the view name in the ×× of the "× View" column, and draw the graphics in the blank space. The view should meet the following requirements: the drawing lines should comply with the provisions of GB4457.4;
The drawing method should comply with the provisions of GB4458.1;
The drawing method of fasteners should comply with the provisions of GB4459.1; The drawing method of axonometric drawings should comply with the provisions of GB4458.3. d.
Fill in the positioning point in a view and indicate it with "×". When the positioning point is aligned with the cross groove of the screw When they overlap, the symbol is omitted. For specific applications, see Appendix A (reference). 8
SJ/T10224-91
Appendix A
Examples of graphic structure description of standard structural parts (reference)
A1 Examples of the graphic structure of a standard structural part represented by a graphic structure description table, see Table A1 to Table A15. A2 Examples of the graphic structure of a standard structural part represented by several graphic structure description tables, see Table A16 to Table A18. These three tables and Table A1 represent the graphic structure of the same standard structural part. Table A1 Graphic structure description table of slotted cylindrical head screws Category
Standard code
Model specification
Main view and positioning point
Slotted cylindrical head screws||tt| |GB65--85
M8×30
Planting screw
SJ/T10224—-91
Table A2 Cross recessed large spherical flange self-drilling locking screw Graphic structure description table Category
Standard code
Model specification
Main view and positioning point
Standard code
Model specification
Mountain and positioning point
Self-drilling screw
Cross precision large spherical flange self-drilling locking screw SJ2832--87
ST4X16
Table A3 Slotted countersunk wood screw Graphic structure description table Wood screw
Slotted countersunk wood screw
GB100--86
Self-drilling lock Tightening screws
Countersunk wood screws
Standard code
Model specification
Main view and positioning points
Standard code
Model specification
Main view and positioning points
SJ/T10224—91
Table A4 Graphic structure description of hexagonal head flange bolts
Hexagonal head flange bolts
GB5789—86
M8×30
—Enlarged series
Table A5 Graphic structure description of studs
Stud stud bm=1.5d
GB899-88
AM8M8X30
Hexagonal head boltswwW.bzxz.Net
Stud studs12 Subclasses of welding pieces
Flake welding pieces;
Positioning welding pieces,
End sleeve welding pieces:
Compression welding pieces;
Other welding pieces.
Subclasses of bearings
Radial ball bearings;
Radial spherical ball bearings;
Radial short cylindrical roller bearings;
Radial spherical roller bearings;
Long cylindrical roller bearings and needle roller bearings;
Spiral roller bearings;
Radial thrust ball bearings;
Tapered roller bearings;
Thrust ball bearings and thrust radial ball bearings; thrust roller bearings and thrust radial roller bearings; other bearings.
Subclass of key
Flat key;
Semi-circular key;
Wedge key;
Spline;
Tangential key;
Other keys.
Subclass of profile
Angle profile;
Groove profile;
I-beam profile;
Z-beam profile;
T-beam profile;
f. Other profiles.
6.1.3In the “Name” column
Fill in the name of the standard structural part.
6.1.4 "Standard Code" column
Fill in the product standard code of the standard structural parts. 6.1.5 "Model Specification" column
Fill in the model and specification of the standard structural parts. View
SJ/T10224—91
Fill in the view name in the ×× of the "× View" column, and draw the graphics in the blank space. The view should meet the following requirements: the drawing lines should comply with the provisions of GB4457.4;
The drawing method should comply with the provisions of GB4458.1;
The drawing method of fasteners should comply with the provisions of GB4459.1; The drawing method of axonometric drawings should comply with the provisions of GB4458.3. d.
Fill in the positioning point in a view and indicate it with "×". When the positioning point is aligned with the cross groove of the screw When they overlap, the symbol is omitted. For specific applications, see Appendix A (reference). 8
SJ/T10224-91
Appendix A
Examples of graphic structure description of standard structural parts (reference)
A1 Examples of the graphic structure of a standard structural part represented by a graphic structure description table, see Table A1 to Table A15. A2 Examples of the graphic structure of a standard structural part represented by several graphic structure description tables, see Table A16 to Table A18. These three tables and Table A1 represent the graphic structure of the same standard structural part. Table A1 Graphic structure description table of slotted cylindrical head screws Category
Standard code
Model specification
Main view and positioning point
Slotted cylindrical head screws||tt| |GB65--85
M8×30
Planting screw
SJ/T10224—-91
Table A2 Cross recessed large spherical flange self-drilling locking screw Graphic structure description table Category
Standard code
Model specification
Main view and positioning point
Standard code
Model specification
Mountain and positioning point
Self-drilling screw
Cross precision large spherical flange self-drilling locking screw SJ2832--87
ST4X16
Table A3 Slotted countersunk wood screw Graphic structure description table Wood screw
Slotted countersunk wood screw
GB100--86
Self-drilling lock Tightening screws
Countersunk wood screws
Standard code
Model specification
Main view and positioning points
Standard code
Model specification
Main view and positioning points
SJ/T10224—91
Table A4 Graphic structure description of hexagonal head flange bolts
Hexagonal head flange bolts
GB5789—86
M8×30
—Enlarged series
Table A5 Graphic structure description of studs
Stud stud bm=1.5d
GB899-88
AM8M8X30
Hexagonal head bolts
Stud studs
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.