JB/T 9162.1-1999 Flat bottom table dimensions
Basic Information
Standard ID:
JB/T 9162.1-1999
Standard Name: Flat bottom table dimensions
Chinese Name:
平底表座 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.1-1999 JB/T 9162.1-1999 Flat bottom table dimensions JB/T9162.1-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of Chinabzxz.net
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Base with Natbottom
bimeusions
This standard specifies the types, necessary types and dimensions of base gauges
Types and dimensions shall be in accordance with the provisions of the table. 8
Marking example:
a=14mm, L=200mm base expression mark: table base 14×200
JB/T9162.1—1999
National Machinery Industry Bureau 1999-05-20 Approved 20
JH/T9162.1-1999
Replaced 7.H J14001.1-
2000-01-01 Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.