Original standard number GB 319-1983 HG/T 2403-1992 Rubber shoes inspection rules marking, packaging, transportation, storage HG/T2403-1992 Standard download decompression password: www.bzxz.net

FRON: SIS_UX
PHONE NO.: 2086 21 6421458
EP2. 14 2Fi3 09:51A1 P1
Chemical Industry Standard of the People's Republic of China
HG 2403 --92
Rules for Inspection of Rubber Shoes
Marking, Packaging, Transportation and Storage
1992-1(-22 Issued
Ministry of Chemical Industry of the People's Republic of China
1993-07-01 Implemented
FRON: SISHIX
FH0NE NO.: 0066 21 64714587 Standard of the People's Republic of China on Chemical Industry
Rules for inspection of rubber shoes
Marking, packaging, transportation and storage
1 Main content and manufacturing model
This standard stipulates the general basic requirements for the inspection rules, marking, packaging, storage and storage of rubber shoes. This standard is applicable to rubber shoes, aldehyde-formaldehyde and plastic shoes. 2 Reference standards
QB.91 Packaging and transportation instructions and markings
GB 28 Batch inspection counting sampling procedures and sampling tables (applicable to batch inspection) GB.0111 Method of random sampling using random numbers 3 Inspection
1 Inspection of batches and lots
31.1 The batches are usually made of the same product type, and the raw material formula and production fiber are basically the same unit product group. 3. 1. 2
The batch size of the famous varieties to be inspected shall comply with the requirements of 1
cloth surface amine. Rubber surface rubber shoes
, plastic cold adhesive
teaching, medical pants
3,2 factory inspection
3.2.1 physical machine performance test
batch (daily production)
AP2. 14 2003 9:52AM P2
HG 2403--92
maximum batch size. double
20 600
10 000
io ono
20 6:00
3.2.1.1 In each batch of products to be inspected, randomly select one pair or the minimum number of samples required for the specified test to conduct the mechanical property test. 3.2.1.2 If the first test result does not meet the requirements of the product standard, additional samples should be taken from the batch of products to retest the ones that do not meet the requirements. If the retest result shows that two pairs (groups) of data meet the requirements of the standard, the batch of products is judged as qualified. If one pair (group) of data meets the requirements of the standard, and the other pair (group) of data still does not meet the requirements of the standard, the batch of products is judged as qualified according to the data that does not meet the requirements of the standard.
3. 2. 2 Appearance Inspection
32.2.1- Appearance inspection should generally be carried out in a place with sufficient light and avoiding light trapping. The inspection is mainly based on testing, and other effective means can be used when necessary. Ministry of Chemical Industry of the People's Republic of China 19-10-22 Batch #1993-07-01 or
FRDM: SIS_WX
PHCNE y0. 1 Q286 21 E471459?HC 3403- 92
APR. 14 2803 89:52AM P3
3.2.2.2 Product appearance inspection before delivery Check each shoe one by one. For defects that are not reflected in a single shoe, a pair of shoes should be inspected. 32.3 The inspection includes batch inspection. When the manufacturer delivers the shoes, each box or each pair of shoes should be accompanied by a product inspection certificate. The product certificate content includes: manufacturer name, product name, standard end, quality grade. The date of delivery is signed and sealed by the inspection personnel. 3.2.4 Return: The seller shall accept the product with the product certificate. If it is considered necessary or has objections, it can propose type inspection. Type inspection includes physical mechanical performance and appearance quality or one of them. 13 Inspection
shall be carried out according to the provisions of 6.6.6 in G31.3.
3. 3.1 Mechanical properties shall be carried out according to the provisions of 3.2.1 of this standard. 33.2 The appearance quality inspection method shall be carried out according to the provisions of 3.2.2. 3.2.1 Sampling plan
The plan adopts the normal inspection sampling plan in accordance with 4.7 of GB2828. The inspection level is in accordance with the requirements of 4.4 of GB2828, and the general inspection level is adopted. The AQL value is .5. Inspect batch by batch according to the requirements of Table 2. Table 2 Normal inspection sampling plan
Qualified quality level
Batch safety bacteria
91~130
151-280
201~500
501 ~ 1 200
1 201 ~- 3 200
# 201~10 000
10 05 ~ 35 000
3. 3.1.2 Sampling method
Size of cattle
Appropriate judgment delay AC
Unsuitable judgment number Re
In case of war, samples must be taken according to the provisions of GB 10111. The sugar oil sample is in units of shorts. According to the method specified in GE 10111, first draw the number of boxes that can meet the sample size requirements to the maximum extent, and then insert the required number of samples from these boxes. In some cases, other random sampling methods can be used after consultation between the two parties. 3.4 When the two parties have disputes over the inspection results, they shall submit them to the superior quality supervision and inspection agency for arbitration. 4.1 Product identification should have the following signs: Manufacturer name; Number; Trademark or trademark name: W=ROM: SIS_AX. Quantity level,
42 Packaging mark
4.2.1 The outer packaging should have the following mark:
No., 2,3
PHDNE NO. : 00E6 21 E4714537HG 2403 --92
Afraid of heat and moisture, follow the provisions of G8191: Name, packaging or article number:
Required information:
Direct measurement grade:
Quantity:
Price:
Production date:
Product name and brand name
Inner packaging with markings:
Product name:
Number:
Marking trademark name:
Measurement grade:
Expiration (outside the packaging):
Manufacturer name and address
# Inverted
Things. 1 Inner packaging
Each pair of shoes is packed with paper bags or branded bags. Rubber shoes with rubber surface are packed with paper bags or branded bags. First, outer packaging
Outsourcing to use the first effective tile board suspected extreme article.
3 Sealing and tying
According to the structure, volume and weight of the box, take effective sealing, box integration and tying measures. Transmission and storage
PPF. 14 2203 49:53AM P4
1 During transportation, it should be prevented from being pressed and sealed to avoid moisture. It is forbidden to put it together with oil, alkali substances, volatile sealants or other corrosive items.
6.2 Store in a warehouse with good ventilation, store in the sun, and keep away from direct sunlight, and keep away from heat sources more than 1m away. During storage, the product should be stored on a plastic cushion with a thickness of more than 20 crel and a distance of more than 20 cu from the ground. It should be kept away from sugar, tin, acid, degradable substances, volatile solvents and other low-carbon items.
6.3 The storage period shall be in accordance with the relevant provisions of the product standards. A spot check shall be conducted every 3 to 5 months to check if the product or packaging has any abnormality.
FROM : sIs_X
Additional Note:
PHONE ND. : E2B6 21 62714587HG 2403 - 92
This standard is issued by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China and is under the jurisdiction of Shanghai Stock Industry Research Institute. This standard is drafted by the upstream department store. This standard is not mainly implemented by Fonan, Juqiyun, Bidali, and Ziben. GE/T319 "Adhesive Surface Adhesive Charm Waste 4
APR. 14 2003 09:54HM P5www.bzxz.net
WA Customer Standard Industry Information Free Download
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.