Dimensional and capacity series for freight container spreader
Basic Information
Standard ID:
GB 3220-1982
Standard Name:Dimensional and capacity series for freight container spreader
Chinese Name:
集装箱吊具的尺寸和起重量系列
Standard category:National Standard (GB)
state:Abolished
Date of Release1982-10-11
Date of Implementation:1983-10-01
Date of Expiration:2012-03-01
standard classification number
Standard ICS number:Material storage and transportation equipment>>Lifting equipment>>53.020.30 Lifting equipment accessories
Standard Classification Number:Comprehensive>>Marking, packaging, transportation, storage>>A85 container, pallet, shelf
Publication information
publishing house:China Standards Press
Publication date:1983-10-01
other information
Release date:1982-10-11
Review date:2004-10-14
drafter:Si Shuyun, Guan Shenqian
Drafting unit:Ministry of Transportation and Communications
Focal point unit:National Technical Committee for Container Standardization
Proposing unit:National Technical Committee for Container Standardization
Publishing department:National Bureau of Standards
competent authority:National Standardization Administration
Introduction to standards:
This standard applies to the spreaders of various types of containers listed in GB 1413-78 "Series of External Dimensions and Weights of Freight Containers". All newly designed and manufactured spreaders of this type shall comply with this standard. GB 3220-1982 Dimensions and lifting capacity series of container spreaders GB3220-1982 standard download decompression password: www.bzxz.net
This standard applies to the spreaders of various types of containers listed in GB 1413-78 "Series of External Dimensions and Weights of Freight Containers". All newly designed and manufactured spreaders of this type shall comply with this standard.
Some standard content:
Scope of application
National Standard of the People's Republic of China
Dimensional and eapaeity seriesforfteight container spreader
UDC 821.866
GB 3220-82
This standard applies to the spreaders of various types of containers listed in GB1413-78 "Series of external dimensions and weights of freight containers". All newly designed and manufactured such spreaders shall comply with this standard. 2
Definition of container spreader
Container spreader is a lifting tool that transmits force through the top frame of the container. It has a structure that adapts to the container and is connected to the four top corner pieces of the container through the rotating locks located at the four corners for lifting operations. 3 Lifting weight and model
The weight series of containers specified in GB1413-78 are 30480kg, 20320kg, 10000kg and 5000kg. The rated lifting capacities of the corresponding slings are 30,500kg, 20,500kg, 10,000kg and 5,000kg respectively, and the corresponding models are JD-30, JD-20, JD-10 and JD-5 respectively.
4 Dimensions
The main dimensions and specifications of various types of spreaders are shown in the following table: Dimensions and limit deviations of center distance of rotary locks
11985±6
5853±6
3807± 6
1764± 4
Published by National Bureau of Standards on October 11, 1982
Diagonal rotary locks
Center distance difference
K= D,-D,
Rated
Lifting capacity of spreader
Corresponding containerbZxz.net
Container model
Implementation on October 1, 1983
GB3220-82
The overall dimensions of the spreader should not exceed the maximum external dimensions of the container, but its guide wings are not subject to this limit. Additional Notes:
This standard was proposed by the National Technical Committee for Container Standardization and is managed by the Secretariat of the Technical Committee. This standard was drafted by the Water Transport Research Institute of the Ministry of Communications. The main drafters of this standard are Si Shuyun and Guan Shenqian. 468
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.