JB/T 8077.1-1999 Broach grinding machine parameters

Basic Information

Standard ID: JB/T 8077.1-1999

Standard Name: Broach grinding machine parameters

Chinese Name: 拉刀刃磨床参数

Standard category:Machinery Industry Standard (JB)

state:Abolished

Date of Release1999-05-20

Date of Implementation:2000-01-01

Date of Expiration:2008-01-23

standard classification number

Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.50 Grinding and Polishing Machines

Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J55 Grinding Machine

associated standards

alternative situation:Only a few enterprises use it, which loses the attribute of industry standard. It is recommended to formulate enterprise standards.

Publication information

other information

Focal point unit:National Metal Cutting Machine Tool Standardization Committee Grinding Machine Branch

Publishing department:National Metal Cutting Machine Tool Standardization Committee Grinding Machine Branch

Skip to download

Introduction to standards:

JB/T 8077.1-1999 This standard is a revision of JB/T 8077-95 "Parameters of broach grinding machines". This standard is part of the JB/T 8077 "Broach grinding machine" series of standards, which includes the following three parts: JB/T 8077.1-1999 Parameters of broach grinding machines JB/T 8077.2-1999 Accuracy inspection of broach grinding machines JB/T 8077.3-1999 Technical conditions for broach grinding machines This standard specifies the parameters of broach grinding machines with movable worktables. This standard is applicable to newly designed broach grinding machines with movable worktables. This standard was first issued in August 1986 as GB 6806-86 and was adjusted to JB/T 8807.1-95 on April 14, 1996. JB/T 8077.1-1999 Broach Grinding Machine Parameters JB/T8077.1-1999 Standard Download Decompression Password: www.bzxz.net

Some standard content:

ICS25.080.50Www.bzxZ.net
Machinery Industry Standard of the People's Republic of China
JB/T 8077,1-80773—1999
Broach Grinding Machine
1999-05-20 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T8077.1-1999
This small standard is formulated on the basis of 1B/T8077—95 "Broaching Machine Standards". The technical content of this standard is consistent with 1B/T8077-95, and the software is newly compiled according to relevant regulations. This standard is part of the JB/T8077 Broaching Machine series of standards, which includes the following parts: JB/T8077.1-1999 Broaching Machine Parameters JB/T8077.2-1999 Broaching Machine Grinding Machine Sugar Content Inspection/T8077.3-1999 Broaching Machine Grinding Machine Installation Conditions This standard replaces JBT9073-95 from the date of implementation. This standard was proposed by the National Metal Cutting Machine Standardization Technical Committee. This standard was put forward by the National Metal Cutting Machine Standardization Technical Committee Grinding Machine Branch. This standard was drafted by: Tool Grinding Machine Research Institute. This standard was first issued in August 1986 as B18077-86, and revised to B18077-86 in April 1996. This standard specifies the parameters of worktable movable broach grinders. This standard is applicable to newly designed worktable movable broach grinders. The type of worktable movable broach grinders is shown in Figure 1. The machine tool parameters should comply with the provisions of Table 1. +
The longest grinding control month
The largest blade position and its diameter
Song head box, the Ministry of Quality of the people's seat, the Ministry of Land, the Ministry of Axis, the Ministry of Civil Affairs, the Ministry of Land and Resources, the Ministry of Civil Affairs ...
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.