title>Packing glass containers -- Tolerances - BB/T 0029-2004 - Chinese standardNet - bzxz.net
Home > BB > Packing glass containers -- Tolerances
Packing glass containers -- Tolerances

Basic Information

Standard ID: BB/T 0029-2004

Standard Name:Packing glass containers -- Tolerances

Chinese Name: 包装玻璃容器 公差

Standard category:Packaging Industry Standard (BB)

state:in force

Date of Release2004-10-20

Date of Implementation:2005-04-01

standard classification number

Standard ICS number:Packaging and transportation of goods>>55.100 bottles, cans, urns

Standard Classification Number:General>>Marking, packaging, transportation, storage>>A82 Packaging materials and containers

associated standards

Procurement status:ISO 9058-1992 IDT

Publication information

publishing house:China Standards Press

Publication date:2005-04-01

other information

drafter:Cui Jiuquan, Du Yuhai, He Ruiling, Li Meiying, Yuan Shouju.

Drafting unit::National Light Industry Glass Product Quality Supervision and Inspection Center, Beijing Glass and Ceramics Quality Supervision and Inspection Center

Focal point unit:National Packaging Standardization Technical Committee Glass Container Technical Committee

Proposing unit:China Packaging Technology Association

Publishing department:National Development and Reform Commission of the People's Republic of China

Introduction to standards:

This standard specifies the tolerances for various glass containers with a circular cross section and a nominal capacity of 50mL to 5000mL. This standard applies to various glass containers for food, wine, beverages, medicines, pesticides, etc. BB/T 0029-2004 Packaging glass container tolerances BB/T0029-2004 Standard download decompression password: www.bzxz.net
This standard specifies the tolerances for various glass containers with a circular cross section and a nominal capacity of 50mL to 5000mL. This standard applies to various glass containers for food, wine, beverages, medicines, pesticides, etc.


Some standard content:

Packaging Industry Standard of the People's Republic of China
BB/T 0029-2004
Peckaging glass containers
Peckaging glass containersTalerunces2004-10-20Released
2005-04-01Implementation
Released by the National Development and Reform Commission of the People's Republic of China
No. 61 of 2004
The National Development and Reform Commission approved the implementation of 28 industry standards such as appearance quality of machinery and clothing (see the attachment for standard numbers and names), 129 industry standards for machinery and equipment, 17 standards for building materials industry, 34 standards for electrical industry, 23 standards for automobile industry, 2 international standards for metal industry, 5 standards for packaging industry, 18 standards for chemical industry, now in the market: Double soil standard pile has April 2005! Starting from: The above machinery industry standards are published by Beijing Machinery Industry Publishing House, building materials industry standards are published by Building Materials Industry Publishing House, automobile industry standards, non-ferrous metal industry standards and packaging industry standards are published by China Planning Publishing House, and industry standards for packaging industry are published by China Petrochemical Press. National Development and Reform Commission of the People's Republic of China October 2, 2002 - F
Appendix:
5 packaging industry standard numbers and names
Standard number
HHTK26-2(14
TRTK2?
BB/T 0028 2004
RB/T (U29-2004
RHIFXI
Standard name
Clip decoration packaging bag collection
Embedded yarn packaging paper
Press type vacuum constant speed
Packaging end device public relations
Forged lead coal decolorization
Replaced standard number
Car standard etc. reduced mining month 50058:1992 thermal glass penetration tolerance international standard.BB/T 00292004
The standard of glass container size is the most important technical standard in China. It is the standard of glass container processing technology in my country. The implementation of non-standard technology will make my country's glass container production further standardized and standardized.
This standard is issued by the National Packaging Standardization Technical Committee, the Carbon 2 Ben Container Technical Committee, and the responsible drafting units of this standard are: China Light Industry Product Quality Supervision and Inspection Center, Beijing Glass Research Institute Quality Supervision and Testing Center
The main contributors of this standard are: Dang Jiuquan, Ji Yihai, Zu Ruiling, Li Meiying, Zhi Shouju: Fan Gu
Packaging glass containers
BU/T 00292004
This standard specifies the tolerances of various types of glassware with a round shape and a nominal volume of 500ml. Flat KJml. This standard is applicable to various glassware such as cosmetics, disinfectants, efficiencies, and agricultural products. 2 Normative references
The following documents have become the terms of this standard through reference. For any dated referenced document, all subsequent revisions (excluding those made later) or revisions are not applicable to this standard. However, the validity period of this standard shall not be subject to the terms of this standard. The latest versions of these documents may be used. For any referenced document without an indication of a date, the latest version shall apply to this document. (88452-87 Test method for glass containers and glass bottles 3 Definition
True diameter
is the maximum half-cross-sectional dimension of the glass container 4 Tolerance
4.1 Capacity tolerance
The actual capacity tolerance (tolerance) shall comply with the specified digits in Table 1. Table 1 Actual capacity tolerance
Common capacity P·ItL
3C0 V. ±,50)
5(X) 4, s: 1000
1000 T. == 5000
The maximum allowable error of the actual design
: The maximum allowable error of the corresponding nominal design is the allowable error of the corresponding nominal design. BB/T 0029--2004
4.2 The nominal height tolerance (1um)
T is calculated as follows:
TH = ±(.6+oMM)
Wherein is the nominal height in m
4.3 The nominal soil diameter tolerance (2um)
T is calculated as follows:
TD --(0.5+0.012U)
wherein is the nominal body diameter (m:
4.4Vertical axis deviation mm)
F: press the first;
divided by our nominal diameter 220mm1.3+00Fr
) nominal quotient 220mm:2=0.3+0.HwwW.bzxz.Net
wherein H is the nominal diameter (trn).
4.511Non-parallelism tolerance
Normal and relative low-end non-parallelism tolerance (Normal tolerance: should comply with the provisions of Table 2: Non-parallelism tolerance of the mouth relative to the bottom
Normal vertical
>40 50
>50 60
Normal tolerance is considered to allow for non-parallelism of the parts. The maximum value is 0.45
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.