JB/T 10426.1-2004 Wind turbine brake system Part 1: Technical requirements
Basic Information
Standard ID:
JB/T 10426.1-2004
Standard Name: Wind turbine brake system Part 1: Technical requirements
Chinese Name:
风力发电机组制动系统 第1部分：技术条件
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release2004-02-10
Date of Implementation:2004-06-01
standard classification number
Standard ICS number:Energy and Heat Transfer Engineering >> 27.180 Wind Power Generation Systems and Other
Standard Classification Number:Energy, Nuclear Technology>>Energy>>F11 Wind Energy
associated standards
Publication information
publishing house:Mechanical Industry Press
ISBN:15111.7285
Publication date:2004-05-30
other information
drafter:Du Guangping, Xiao Zhemin
Drafting unit:One-to-One Meide (Luoyang) Wind Power Equipment Co., Ltd.
Focal point unit:National Wind Machinery Standardization Committee
Proposing unit:China Machinery Industry Federation
Publishing department:National Development and Reform Commission of the People's Republic of China
Introduction to standards:
This part specifies the basic requirements for the brake system of horizontal axis grid-connected wind turbine generator sets, including the composition, working conditions, basic performance, test methods, inspection rules, marking, packaging and transportation. This standard applies to the brake system of horizontal axis grid-connected wind turbine generator sets, which is composed of an air brake device combined with a mechanical brake device in the transmission system, and a brake system composed of a low-speed shaft mechanical brake device combined with a high-speed mechanical brake device in the transmission system. JB/T 10426.1-2004 Wind turbine brake system Part 1: Technical conditions JB/T10426.1-2004 Standard download decompression password: www.bzxz.net
Some standard content:
ICS27.18O
Machinery Industry Standard of the People's Republic of China
JB/T10426.12004
Wind turbine generator system
Braking system of wind turbine generator systemsPartl:Technical conditon
2004-02-10 Issued
2004-06-01 Implementation
The National Development and Reform Commission of the People's Republic of China issued
Normative reference documents
Technical specifications and definitions
Technical requirements for braking systems
Working conditions.
Performance requirements
Design requirements
Manufacturing requirements
Technical requirements for manufacturing equipment
5.1 Structural form
5.2 Performance requirements
Precision requirements for braking equipment
Technical requirements for driving mechanisms
6.1 Structural form
5.2 Performance requirements
? Please see the inspection!
Inspection category
Inspection frequency
Acid test method
Judgment rule,
Packaging and transportation.
Quality certification:
Friction moment curve of flexible loading section
Figure? Friction moment curve of semi-flexible loading mode..Figure! Friction moment curve of step-additive type..ItemWww.bzxZ.net
JH/T 10426.1-20c4
JDT10426 wind turbine generator system or system is divided into two parts: Part 1: Technical components:
Part 2: Test method.
This part is the first part of JH/10426.
This part is formulated for the first time.
JBI10426.1—2DQ4
This part is based on
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.