Some standard content:
Classification number: Y99
Light Industry Standard of the People's Republic of China
OB/T 3691-1999
/T99039100
Box-type barley germination system
Published on April 21, 1999
State Bureau of Light Industry
Implementation on April 21, 1999
QBT3691-1999
This standard is based on the special collection standard Z0Y99039-1990 Box-type human hair cleaning system 3, which was published by the Overseas Bank (1999] 112 document and converted into a standard number of \3691-1999. The technical standard is proposed by the National Light Industry Administration Bureau. This standard is held by the National Liquor and Beverage Machinery Standardization Technical Committee. The standard is funded by the whole machine factory. The main contributors to this standard are: Goods competition, fast guard Yi, Shen Wei. This standard is implemented on the day of the implementation of the original light industry standard ZB, Y90039-19 heart box this person exchange germination system.
Theme with the inner set and the use of the topic
People's Republic of China Light Industry Standard
Sugar barley germination system
QQ/T 3691-1993
Replaces ZB/TY89039-1990
This standard specifies the classification, tactical requirements, test methods, quick inspection rules, marking, packaging, transportation and storage of seven-box type fermentation system.
This standard uses the essential equipment of the ten-box type fermentation system (hereinafter referred to as the product). Reference standard
QR917 Wine making machine Product model coding method QH82
Light industry machine heat scale single use technical parts
GB5675
Chainless iron grade
1800~180 tolerance and straight
C#1031 agricultural and roughness signature number and soldier value R112~F84: drive model profit pipe tolerance
machine, handicraft new exploration and gas protection lamp girl continued environment stem car forbidden size G3 19:
Packaging storage and transportation pictorial mark
Beijing 27th series of courtesy electric product packaging general technical conditions IRA
Product brand
3 Product classification
Product connection structure and operation characteristics are divided into: Sa anti-fire box semi-agricultural step system and rotating pen type large safety system, 3.2 Model
3.2.1 Product model is compiled according to QB917 regulations and consists of the following three units. The three units indicate the product number: production capacity version! Year The second unit indicates the production type: Sa (Sa) pull box (X) rotation (Zhuin) transfer (Xing) type
The first unit indicates the wine period according to the professional number: wine (Ii) State Light Industry Bureau 1953-C4-21 approved
1999-74-21 implementation
3:2.2 Product marking threshold
QB/T 3691-1699
Annual output of 6000 tons of safflower box type fermentation system, the product name is: JSX6 strict Latin box fermentation system
Annual output of 13050 tons of safflower transfer type fermentation system, the product name is: ZX core transfer type fermentation system
3.3 Structural type, the specifications are shown in Table 1,
Business specification of the fermentation department
Suitable box fermentation system
Two" sales large change fermentation black spot
Minor primary safety fermentation system The transfer building of the whole city is a large-scale development, with solid requirements. In order to achieve annual production efficiency, 3.4 production equipment and special services are required under the following conditions: 3.4, 1. The flow box system must have the following equipment: lifting type tipping machine; cutting machine: milk conveyor: miscellaneous agent transporter; miscellaneous trolley: 1. 1. Plate lifting and sealing: deep Chinese tea furnace; tt||| An vegetable furnace; tt||| withdrawal machine.
Transfer type large withering rack system card must have the following equipment: B.
Peking wheel company:
Equipment:
Cold Hua box dense board
Box lifting device,
7 stack box bottom plate:
Lower box lifting device;
Cover plate equipment: bzxZ.net
Manual board material loading
Ten wheat research and development plate type conveyor,
Production capacity
tons, annual
heat return these devices.
4 Technical requirements
year, 1 technical indicators see Table 2.
Product Name
QB/T3691-1999
Production Negative Belt Rate
(in terms of number》
Zheng Xueshu
Sa T Box Big
Extraction System
Ling Yi Su Wu Da
Chu Distribution System
4. 2 Basic technical requirements
Connection
420~46
Water volume
(process water)
m/100kg
Drying furnace lower lifting period
Interval heat
J/100E lower installation
20620-0
620-700
Total amount of saved medicine
10%~9056
4.2.1 The product shall comply with the provisions of this standard and be manufactured and inspected according to the national samples and technical documents approved by the prescribed procedures. 4.2.2 The materials, blasting materials and accessories shall comply with the grades specified in the drawings, and the materials shall comply with the provisions of the current national standards, departmental standards and industry standards, and have national quality certificates. Furthermore, it can only be used after being tested and approved by the relevant inspection and supervision departments.
4.2.2 The parts should meet the requirements of the relevant regulations. All parts should be tested and treated except for internal stress. For defects that do not affect the durability of use, it is allowed to be repaired.
42.4 The quality of the parts should meet the requirements of QB842. 4,2,5 The lubricating device in the product must be effective, and no leakage is allowed to avoid contamination of materials. 4.2.6 The surface of the product should meet the requirements of QB842. The paint should be smooth, glossy, and uniform in color. Spots, bubbles, drips, and obvious scratches are not allowed. 4.3 Processing quality requirements for main parts of products
4.3.1 The shape and position tolerances of key parts such as gauges and tables shall not be lower than the requirements of the drawings, and shall comply with the requirements of CB800~1804G31, C1182~1184. 4.3.2 The dimension tolerances of machined parts in the drawings are not adjusted to the IT14 level in GD1BD4, and the dimension tolerances of non-machined parts shall be in accordance with 1T16.
4.3.3 The processing requirements of key parts shall be derived from the provisions of QDR42. 4.4 The quality of steel structure joints shall comply with the provisions of G108, and the quality of the joints shall comply with the provisions of Q812. 4.5 Installation and use requirements
4.5.1 The total temperature of the product during operation shall not exceed 65℃, and the temperature rise shall not exceed 35℃. 4.5.2 The pressure value of the product during operation shall not exceed 85dB (A) 4.5.3 Germination box
QB/T3691--1999
4.5.3.1 The height difference between the assembled boards shall not exceed %mm, and the flatness tolerance of the two boards shall not exceed 2mm. The height difference between the boards shall not exceed 1.5mg
4.5,3,2 The mesh board shall be installed from top to bottom. The mesh board shall be installed in a piece of steel. The selective assembly method shall be adopted. The assembly number must be marked at the same time. 4.5.3.3 After the mesh board is installed, the flatness tolerance of the bed surface shall not exceed 8nm. 4.5.4 The bottom plate of the sieve
4.5.41 Install according to the requirements of 4.5.3.2.
4.5.4.2 When the temperature column is installed, when it rises to the highest position, the top of the temperature measuring hook shall not protrude from the sieve plate surface, nor be lower than 1.8mm below the sieve plate.
4.5.4.3 The synchronous controller of each reducer and the lifting plate controller shall be in accordance with the specifications of the sieve plate drawing. 4.5.5 Lifting type sweet changer
4.5.5,1 After the whole machine is assembled, the four running wheels shall be in the same level, run smoothly, and there shall be no belt jam. 1.5.5.2 The two measuring gears have good tooth mesh. 4.5.5.3 When installing the transmission light on the side of the machine, it should ensure flexible movement, good connection between the scraper and the screen plate of the machine, and the following should be true:
4.5.5.4 The mixer should be vertical to the screen plate when it is attached to the upper part. 4.5.5.5 The mixer should not be involved in any way when it is lifted or lowered. 4.5.5,6 When the machine is switched between high and low speed, it should be flat and not have obvious protrusions. 4.5.6.1 After the machine is assembled, the four running wheels should be on the same plane, and the flatness tolerance should not be greater than 6 convex four. 4.5.6.2 The pin gears on both sides should be well matched with the cage. 4.5.6.5. The working tolerance of the unloading shovel and the net right should be 5mm4.5.7 Scraper
4.5.7.1 The walking mechanism is also flexible in shape, and there is no jamming and deflection. 4.5.2 The parts are disassembled and transported, and there is no jamming and deflection. 4,5.3 The nozzles and sprays on the large and small water pipes are required to be absorbed and injected. 4.5.7.1 After the whole machine is assembled, the end faces of the large scraper should be in the same vertical plane, and the coplanar cover should not be greater than 1.5mm
4.5.7,5 After the whole machine is assembled, the bottom edge of the large scraper located on the Qilong slideway (the clean plate is folded) should be in the same half plane, and the surface tolerance is not greater than Bm.
4.5.8 Drying bed
4.5.8.1 The tolerance of the plane of the rack and the screen plate should not be greater than -+2,5mm4.5.8.2 The tolerance of the axis between the seven bearings should not be greater than 1. 4.5.3 Drying furnace
4.5.9.1 The flatness tolerance of the lower drying furnace bed surface should be less than 5mm, and the interval of the screen plate should not be greater than 2m. 4.5.9.2 After the main shaft is installed, the straightness tolerance of the drying furnace bed surface to the axis center should not be greater than 10~5mm4.5.9.3 The connection long hole of the screen plate should have a heat elongation of not less than 84 after installation. 4.5.9.4 After the three wheels are installed, check that the flatness tolerance of the outermost scraper plate should not be greater than 8~4m. 4
QB/T3691—1999
4.5.9.5 The distance between the bottom of the scraper plate and the bed surface is 8-11mm4.5.10 The bottom of the box
4.6.10_1 After the whole machine is assembled, there is no stagnation in the deceleration pen, and the four parts are synchronized. 4.510.2 Each screen plate should be pre-matched and the small scale of each scale should be adjusted. The overall assembly of the screen plate can be selected by the assembly method, but it must be in a unified way or according to the special matching sequence marked in accordance with 1. 4.5.10.3 The tolerance of the plate should not be greater than 31 days, and the height difference of each screen plate connection position should not be greater than 1.5. 4.5.10.4 The deceleration synchronous controller is strictly in accordance with the drawing requirements. 4.6 Under the condition that the user complies with the product operation, storage, installation and use rules, within 1 month from the month of issuance, of which the use period is less than 1 month, if the product cannot work normally due to poor quality, replacement of parts, etc., the user shall be responsible for the return of the product.
5 Test method
5.1 Implementation
5.1.1 The empty line test is carried out in the manufacturer. If sufficient conditions are met, it can be tested at the user's place. 5.1.2 The empty line test shall be no less than the above and meet the following points. 5.1.2.1 All connecting parts and fasteners shall not have looseness: 5.1.2.2 All tight parts shall not have the phenomenon of leakage, waiting for liquid, etc. 5.1.2.3 All rotating parts shall rotate smoothly, start and move smoothly, and shall not make any abnormal noise.
5.1.2.4 The test shall be carried out in accordance with the provisions of 1.5.1 of this standard, 5.2 load test or test
and .2.1 product difference test shall be carried out by the user factory. 5.2.2 Load test shall be carried out in accordance with the requirements of the production process of the variable speed machine, and shall comply with the provisions of .3, 5.2.3, and the parts of the product shall be inspected by the inspection department. The qualified parts can be assembled. The whole machine shall also be inspected after installation.
Inspection is divided into two types: delivery inspection and type inspection. 6.1 Factory Inspection
The inspection department of the manufacturer shall carry out full inspection according to the requirements of the relevant technical documents. After passing the inspection, the certificate of conformity shall be issued.
5.1.1 No-load inspection shall be carried out according to the requirements of 3.1. 6.1.2 Load test shall be carried out according to the requirements of 5.2. Note: 6.2 Wall inspection
5.2.T If any of the following conditions occurs, type inspection shall be carried out. When the product is transferred to the factory for production, the type test shall be firm: Normal post-production, such as major changes in the structure, materials, and process, which may affect the previous product Performance; ·5
Re-production after production Appendix:
Q/369-1999
, when the factory inspection results are significantly different from the last type inspection, the national quality supervision agency proposes a type inspection requirement, 6.2.2 Type inspection is a comprehensive inspection of the machine quality. All items should meet the requirements. If they are unqualified, they should be re-assembled and re-inspected until they are qualified. Marking, packaging, packaging, storage
7,1 7.1.1 Your product should be clearly labeled in the right place. The label should comply with the relevant regulations of the Ministry of Industry and Information Technology. The content should include: product name: factory name: product model or marking date. 2.2 Product packaging should comply with the regulations of the Ministry of Industry and Information Technology. 7.2.1.1 All machines, equipment or major parts of the product should be packaged in accordance with the packaging design requirements. The packaging should be firm and reliable to prevent the goods from being transported. Parts are damaged or lost. 7.2.3
There are no documents or labels on the obvious surface of the packaging box, and the contents include: b.
Receiving unit,
Receiving station,
Full name of product (number and name),
Factory number:
Delivery note and address.
The packaging box shall comply with the provisions of GB191, and shall be marked with "lifting line", "center", "handle with care", "moisture-proof" and other symbols and graphic signs.
?.2.5 Each packaging box shall be accompanied by the following technical documents; packing list:
Delivery instructions.
7.3 Transportation
The transportation of products shall comply with the requirements of road and water transportation and loading. 7.4 Storage The packaging boxes of the products should be stored indoors in a well-ventilated and dry place. If they are stored outdoors, they must be equipped with sun-proof and anti-adhesion facilities. For long-term storage, the boxes must be opened and inspected for smoke and oil leakage, and attention must be paid to preventing oil leakage.1. All the difference tests should be conducted by the user factory. 5.2.2 The load test should be conducted according to the requirements of the production process of the machine, and meet the requirements of 5.2.3. The load test of the product should be carried out in accordance with the requirements of 1.3 of this standard and the E inspection rules. All the parts of the product should be inspected by the inspection department and the qualified parts can be assembled. The whole machine should also be inspected after being newly installed. The inspection is divided into two types: export inspection and type inspection. 6.1 Factory Inspection
The inspection department of the manufacturer shall carry out full inspection according to the requirements of the relevant technical documents. After passing the inspection, the certificate of conformity shall be issued.
5.1.1 No-load inspection shall be carried out according to the requirements of 3.1. 6.1.2 Load test shall be carried out according to the requirements of 5.2. Note: 6.2 Wall inspection
5.2.T If any of the following conditions occurs, type inspection shall be carried out. When the product is transferred to the factory for production, the type test shall be firm: Normal post-production, such as major changes in the structure, materials, and process, which may affect the previous product Performance; ·5
Re-production after production Appendix:
Q/369-1999
, when the factory inspection results are significantly different from the last type inspection, the national quality supervision agency proposes a type inspection requirement, 6.2.2 Type inspection is a comprehensive inspection of the machine quality. All items should meet the requirements. If they are unqualified, they should be re-assembled and re-inspected until they are qualified. Marking, packaging, packaging, storage
7,1 7.1.1 Your product should be clearly labeled in the right place. The label should comply with the relevant regulations of the Ministry of Industry and Information Technology. The content should include: product name: factory name: product model or marking date. 2.2 Product packaging should comply with the regulations of the Ministry of Industry and Information Technology. 7.2.1.1 All machines, equipment or major parts of the product should be packaged in accordance with the packaging design requirements. The packaging should be firm and reliable to prevent the goods from being transported. Parts are damaged or lost. 7.2.3
There are no documents or labels on the obvious surface of the packaging box, and the contents include: b.
Receiving unit,
Receiving station,
Full name of product (number and name),
Factory number:
Delivery note and address.
The packaging box shall comply with the provisions of GB191, and shall be marked with "lifting line", "center", "handle with care", "moisture-proof" and other symbols and graphic signs.
?.2.5 Each packaging box shall be accompanied by the following technical documents; packing list:
Delivery instructions.
7.3 Transportation
The transportation of products shall comply with the requirements of road and water transportation and loading. 7.4 Storage The packaging boxes of the products should be stored indoors in a well-ventilated and dry place. If they are stored outdoors, they must be equipped with sun-proof and anti-adhesion facilities. For long-term storage, the boxes must be opened and inspected for smoke and oil leakage, and attention must be paid to preventing oil leakage.1. All the difference tests should be conducted by the user factory. 5.2.2 The load test should be conducted according to the requirements of the production process of the machine, and meet the requirements of 5.2.3. The load test of the product should be carried out in accordance with the requirements of 1.3 of this standard and the E inspection rules. All the parts of the product should be inspected by the inspection department and the qualified parts can be assembled. The whole machine should also be inspected after being newly installed. The inspection is divided into two types: export inspection and type inspection. 6.1 Factory Inspection
The inspection department of the manufacturer shall carry out full inspection according to the requirements of the relevant technical documents. After passing the inspection, the certificate of conformity shall be issued.
5.1.1 No-load inspection shall be carried out according to the requirements of 3.1. 6.1.2 Load test shall be carried out according to the requirements of 5.2. Note: 6.2 Wall inspection
5.2.T If any of the following conditions occurs, type inspection shall be carried out. When the product is transferred to the factory for production, the type test shall be firm: Normal post-production, such as major changes in the structure, materials, and process, which may affect the previous product Performance; ·5
Re-production after production Appendix:
Q/369-1999
, when the factory inspection results are significantly different from the last type inspection, the national quality supervision agency proposes a type inspection requirement, 6.2.2 Type inspection is a comprehensive inspection of the machine quality. All items should meet the requirements. If they are unqualified, they should be re-assembled and re-inspected until they are qualified. Marking, packaging, packaging, storage
7,1 7.1.1 Your product should be clearly labeled in the right place. The label should comply with the relevant regulations of the Ministry of Industry and Information Technology. The content should include: product name: factory name: product model or marking date. 2.2 Product packaging should comply with the regulations of the Ministry of Industry and Information Technology. 7.2.1.1 All machines, equipment or major parts of the product should be packaged in accordance with the packaging design requirements. The packaging should be firm and reliable to prevent the goods from being transported. Parts are damaged or lost. 7.2.3
There are no documents or labels on the obvious surface of the packaging box, and the contents include: b.
Receiving unit,
Receiving station,
Full name of product (number and name),
Factory number:
Delivery note and address.
The packaging box shall comply with the provisions of GB191, and shall be marked with "lifting line", "center", "handle with care", "moisture-proof" and other symbols and graphic signs.
?.2.5 Each packaging box shall be accompanied by the following technical documents; packing list:
Delivery instructions.
7.3 Transportation
The transportation of products shall comply with the requirements of road and water transportation and loading. 7.4 Storage The packaging boxes of the products should be stored indoors in a well-ventilated and dry place. If they are stored outdoors, they must be equipped with sun protection and anti-adhesion facilities. For long-term storage, the boxes must be opened and inspected for smoke and oil leakage, and attention must be paid to preventing oil leakage.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.