Technical standard of the lining of glass fibre reinforced plastic of epoxy resin for steel tank
Some standard content:
Technical standard of the lining of glass fibre reinforced plastic of crxy resin for steel tanksYrr 0326—2002
Editor: Puhu Huashan Anticorrosion Group Co., Ltd. Approval Department: National Economic and Trade Commission Petroleum Industry Press Car
2002 Beijing
Epoxy FRP Materials
Item List
Epoxy FRP Grades and Structures
Epoxy FRP Lining Construction
General Provisions
Surface Pretreatment
Liquid Material Preparation
Epoxy FRP Lining Construction Technology
Epoxy FRP Lining Maintenance
Quality Inspection·
General Provisions
Quality Inspection During Construction
5.3 Final Quality Inspection of Epoxy FRP Lining 6 Repair and Rework||tt ||"Health, Safety and Environmental Protection·
8 T Information
Appendix A Determination Method of Amine Value
Appendix B Determination Standard for Silica Content in Quartz Powder Towels Words and Terms
Appendix Technical Standard for Epoxy Glass Fiber Reinforced Plastic Lining for Steel Storage Tanks Article Description 2
Announcement of the State Economic and Trade Commission of the People's Republic of China
No. 32, 2002
Announcement of 78 Petroleum Industry Standards
The State Economic and Trade Commission approved 78 petroleum industry standards, which are hereby announced and will be implemented from August 1, 2002.
Published and distributed by Petroleum Industry Press with industrial standards Appendix: Names and Numbers of 78 Petroleum Industry Standards State Economic and Trade Commission of the People's Republic of China 2002 May 28, 2002
Appendix:
Names and numbers of 78 petroleum industry standards
Standard name
Standard number
Replacement standard number
Economic calculation method of anti-corrosion engineeringSY/T0042-2002SYJ42-89Method
Oil and gas field engineering measurement specificationSY/T0054-2002SY/F0054-93 Fire protection design specification for oil tank areaSY/ 0075--2002SY0075-93Fan
Electroglass lining for steel storage tanksSY/0326-2002GRP technical standard
Polyethylene for buried steel pipelineSYT0413-2002SY/T4013-95Anti-corrosion layer technical standard
Oil and natural gas metal pipelineSY/T0452-2002SY4052-92Welding process assessment||tt ||Steel butt-welded pipe for oil and gas pipelineSY/T0518-2002SY/I0518-927
Parts design code
Seismic detector Part 3SY/『5046.3---2002Eddy current geophone
Seismic detector Part 4SY/T5046.4-2002Moving coil acceleration geophone
10Cutter for drilling and repair
SY/T 50702002 SY 5070--91
SY 542491
SY/T5688-95
Standard name
Standard number
Replacement standard number
Items for evaluating wellbore qualityHSY/T5088--2002SY/T5088-9311
And calculation method
Sulfonated lignite for drilling fluidSY/T5092-2002Y/T5092-9312
13 Well [device and Christmas tree specificationSY/T5127-2002SY5127-92 specification
SY 5279.191
SY 5279.2-91
SY 5279.3--91
SY 5156—93
14Centrifugal turbine for oil drilling rigSY/5141—2002SY/T5141---93Hydraulic torque converter
Metallic element atoms in rockSYT5161—2002SY5161—8715
Absorption spectrum determination method
Drill string conversion joint
SY/T5200--2002 SY 520093
Natural gamma spectrum of rock sampleSY/5252—2002SY/T5252---91Analysis method
Eccentric water distribution toolbzxZ.net
SY/T 5253—91
SYI 5275--2002 SY 5275—91
Oil transfer arm for port loading and unloading
$Y/T 5298--2002SY/r5298--91
Onshore seismic exploration data collectionSY/T5314--2002SY/T5314—9520
Collection quality inspection and acceptance
Percussion wellbore coring technologySY/I5326—2002SY/I5326—93 Regulations
Sesbania gum for fracturing
SY/T 560593
SY/T 534I—2002 SY/T 5341—88Serial number
Standard name
Standard number
Replacement standard number
Reservoir sensitivity flow testSY/T5358--2002SY/r5358-—9423
Evaluation method
Expandable packer
25Special coring tool
Oil repair winch
Oil drilling rig winch
SY/T 5404—2002 SY/F5404—91SY/r 5414--2002 SY 5414--91
SY/F 6200----1996
SY/T 5470---2002 SY 5470--92SY/I 5532—2002 SY/T 5532—9228i IDS series for oil drilling rigSY/I 5533—2002 SY/I5533—92Electromagnetic eddy current brake
Specification for commissioning of crude oil pipelineSY/T5536—2002SY/T5536—92Specification
Physical property analysis of fluid in condensate gas reservoirSY/T5543--2002SY/5543—92Single screw pumping
SY/R 5549--2002 SY-5549-92
Open hole and cased well loggingSY/T 5600—2002SY/T5600—93Operation technical specification
SY/T 5606--93
Cable conveying perforating technologySY/T 5604—2002 SY/T 5604—93 Technical procedures and quality assessment
Oil test T.SY/T 5710-2002 SY/T 5712--9534
Technical specification for performance inspection
SY/T 571095
35 Name of oil geological rock and color codeSY/T5751-2002 SY/T5751-1995
Standard name
36 Pour point depressant for pipeline crude oil
Standard number
Alternative standard number
SY/T 5767--2002 SY/I 5767--1995SYI 5887--93
37 Technical specifications for controlled source acoustic magnetotelluricSY/I5772-2002SY/T5772-1995 Seismic exploration and measurement techniques in mountainous areasSY/5775-2002SY/T5775---199S38
Technical specifications
Jiang Ren, production-output profile loggingSY/T 5783--2002SY/F 5783--93Data interpretation procedures
40Casing shaping and sealing reinforcementSY/15790-2002SY/I5790-93Process practices
Ground gravity exploration technical specificationsSYT5819-2002SY/I5819-93Procedures
Sucker rod centralizer,
SY/T 58322002 SY7I 583293
Experience of chemical plugging removal in oil and water wellsSY/T5849-2002SY/T5849-93Economic effect evaluation method
Labor quota for gas production engineering
Labor quota for gas transmission engineering
SY/F 5896-2002 SY/T 5896-93
SY/5897—2002SY/T5897—93
Polyacrylamide for drilling fluidSY/T5946—2002SY/5946—9446
Petroleum gravity, magnetic, electricSY/F6055—2002SY/T6055—94 method, geochemical prospecting map
Standard name
Standard code
Replacement standard code
Thermophysical parameters of formation rockSY/F6107--2002 SY/『6107—199448
Determination method
Development site of carbonate gas reservoirSY/T6110—2002SY/T6110—94Description of quality characteristics
Natural gas pipeline commissioningSY/T6233—2002SY/I6233--1996Specification
Full-size test of oil well pipeSY/16238.2-200251
Method for testing oil and casing threads
Screw-on test
Laboratory work in oil-producing industrial workplaces SY6524-2002 Requirements for the equipment of dynamic protective equipment
Recommended foam drainage and gas productionSY/I6525-200253
Dynamic reaction of hydrochloric acid and carbonate rocksSYT6526-200254
Determination method of reaction rate
Original material and acoustic imaging loggingSYT6527-200255
Data quality specification
Measurement method of dielectric constant of grid sampleSY/T6528-2002
Fixed fire fighting system for crude oil depotSY/T652 9--2002 System operation specification
Inner coating of pipeline for non-corrosive gas transportationSY/I6530---2002
Straight seam resistanceSY/16531-2002 welded steel pipe for oil well pump body
Standard name
Standard number
Calibration method of induced polarization instrumentSYT6532-2002 Stable well test test and interpretationSY/I6533-2002 method
Twin screw oil and gas mixed transmission pump
High pressure gas underground gas storage well
SY/T 6534-2002
SY/I 6535--- 2002
Technical specification for cathodic protection of inner wall of steel water tanks
Analysis method of gas and solution in natural gas purification plantSY/T6537-2002
Formulated selective desulfurization solventSY/T6538-2002
130X seismic data acquisitionSY/I6539-2002System inspection items and technology
Drilling fluid completion fluid damage oilSY/T6540-2(02Indoor evaluation method of layer
Planning, design and construction of fixed offshore platforms SY/T10009-
Recommended practices for 2002
Method 1-Load resistance coefficient
Design method (Supplement 1)
Marine oil route drawing regulations, SY/10028-
Recommended practices for 2002 fixed offshore platform planning, SY10030-
Recommended practices for 2002 fixed offshore platform design and construction-—Working stress design
Method (Supplement 1)
Replacement standard number
SY/T 10009-
SY/r 10030-
Standard name
Specification for submarine pipeline systems
Standard number
SY/T 10037-
73 Recommended practice for planning, design and construction of a fixed offshore platform helicopter SY/T10038 2002
74 Recommended practice for design and analysis of floating structure positioning systems SY/T10040 2002
Recommended practice for installation of electrical equipment in oil and gas facilities SY10041-
2002
Recommended practice for classification of electrical equipment in oil and gas facilities SY10042-
2002
Guide to pressure relief and decompression systems SY/I10043
78 Recommended practice for sizing, selection and installation of pressure relief and decompression devices SY/T10044-
Replacement of standard number SY/T 480492
SY/T 4806-92
SY/T4811—92
SY/F 4809-92
SY/T 4812--92
This standard is compiled in accordance with the spirit of China National Petroleum Corporation's Public Quality and Safety Document No. 12000 No. 31, edited by Puyang Huayou Anti-corrosion Collection Co., Ltd., and participated in the compilation of the former Petroleum Exploration and Acoustic Survey and Design Institute. During the compilation of this standard, the compilation members followed the relevant national policies and summarized the design and implementation experience of epoxy fiberglass lining of steel storage tanks in the oil and gas industry for many years, referred to relevant literature and materials, and formed a draft for soliciting opinions. The opinions of relevant units and experts were widely solicited in two ways: letter review and joint review, and the main issues were repeatedly revised. Finally, the China Petroleum Engineering Construction Professional Standardization Committee reviewed the draft together with relevant departments.
The main contents of this standard include: general, epoxy FRP materials, epoxy FRP grade! Smart structure, epoxy FRP lining construction, quality inspection, repair and rework, sanitation, safety and environmental protection, door information, etc. This standard was proposed by the Second Professional Standardization Committee of Petroleum Engineering Construction and was drafted by Puyang Huayou Anti-corrosion Jizhou Co., Ltd. This standard participated in the drafting of the unit: Zhongyuan Petroleum Exploration Bureau Survey and Design Institute, the main drafters of this standard: Yang Mingjun, Zhou Tieshuan, Qiao Jiabo, Huang Bo, Ben Xiawei, Liu Xueqin, Li Bo, Zhang Xingfeng
1.0.1 In order to correctly apply the epoxy FRP lining anti-corrosion technology, ensure the anti-corrosion quality of the epoxy FRP lining of steel tanks, and extend the service life of steel storage tanks, this standard is formulated.
1.0.2 This standard applies to Design, implementation and acceptance of epoxy FRP lining anti-corrosion project for steel storage tanks with storage medium temperature not higher than 80℃ and storage medium such as crude oil, sewage and non-ferrous water.
1.0.3 The environmental conditions for the construction of epoxy FRP lining are temperature not lower than 10: and mud concentration not more than 80%.
1.0.4 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national laws, regulations and relevant mandatory standards in terms of safety technology, labor protection and environmental protection.
1.0.5 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national mandatory standards.5. In addition to complying with this standard, the construction of epoxy fiberglass lining projects for steel storage tanks shall also comply with the provisions of the relevant mandatory standards currently in force in the country.5. In addition to complying with this standard, the construction of epoxy fiberglass lining projects for steel storage tanks shall also comply with the provisions of the relevant mandatory standards currently in force in the country.2-200251
Method for testing the thread of oil and casing
Screw test
Requirements for equipment of labor protection equipment in oil industry workplacesSY6524-2002
Recommended foam drainage and gas productionSY/I6525-200253
Method for determining the reaction rate of hydrochloric acid and carbonate rocksSYT6526-200254
Method for determining the reaction rate of hydrochloric acid and carbonate rocksSYT6527-200255
Data quality specification
Method for measuring the dielectric constant of the original sampleSY/T6528-2002 2 method
Crude oil depot fixed fire protection systemSY/T6529--2002System operation specification
Inner coating of pipeline for non-corrosive gas transportationSY/I6530---2002
Straight seam resistanceSY/I6531-2002 welded steel pipe for oil well pump body
Standard name
Standard number
Calibration method of induced polarization instrumentSYT6532-2002Stability well test test and interpretationSY/I6533-2002 method
Twin screw oil and gas mixed transmission pump
High pressure gas underground gas storage well
SY/T 6534-2002
SY/I 6535--- 2002
Technical specification for cathodic protection of inner wall of steel water tanks
Analysis method of gas and solution in natural gas purification plantSY/T6537-2002
Formulated selective desulfurization solventSY/T6538-2002
130X seismic data acquisitionSY/I6539-2002System inspection items and technology
Drilling fluid completion fluid damage oilSY/T6540-2(02Indoor evaluation method of layer
Planning, design and construction of fixed offshore platforms SY/T10009-
Recommended practices for 2002
Method 1-Load resistance coefficient
Design method (Supplement 1)
Marine oil route drawing regulations, SY/10028-
Recommended practices for 2002 fixed offshore platform planning, SY10030-
Recommended practices for 2002 fixed offshore platform design and construction-—Working stress design
Method (Supplement 1)
Replacement standard number
SY/T 10009-
SY/r 10030-
Standard name
Specification for submarine pipeline systems
Standard number
SY/T 10037-
73 Recommended practice for planning, design and construction of a fixed offshore platform helicopter SY/T10038 2002
74 Recommended practice for design and analysis of floating structure positioning systems SY/T10040 2002
Recommended practice for installation of electrical equipment in oil and gas facilities SY10041-
2002
Recommended practice for classification of electrical equipment in oil and gas facilities SY10042-
2002
Guide to pressure relief and decompression systems SY/I10043
78 Recommended practice for sizing, selection and installation of pressure relief and decompression devices SY/T10044-
Replacement of standard number SY/T 480492
SY/T 4806-92
SY/T4811—92
SY/F 4809-92
SY/T 4812--92
This standard is compiled in accordance with the spirit of China National Petroleum Corporation's Public Quality and Safety Document No. 12000 No. 31, edited by Puyang Huayou Anti-corrosion Collection Co., Ltd., and participated in the compilation of the former Petroleum Exploration and Acoustic Survey and Design Institute. During the compilation of this standard, the compilation members followed the relevant national policies and summarized the design and implementation experience of epoxy fiberglass lining of steel storage tanks in the oil and gas industry for many years, referred to relevant literature and materials, and formed a draft for soliciting opinions. The opinions of relevant units and experts were widely solicited in two ways: letter review and joint review, and the main issues were repeatedly revised. Finally, the China Petroleum Engineering Construction Professional Standardization Committee reviewed the draft together with relevant departments.
The main contents of this standard include: general, epoxy FRP materials, epoxy FRP grade! Smart structure, epoxy FRP lining construction, quality inspection, repair and rework, sanitation, safety and environmental protection, door information, etc. This standard was proposed by the Second Professional Standardization Committee of Petroleum Engineering Construction and was drafted by Puyang Huayou Anti-corrosion Jizhou Co., Ltd. This standard participated in the drafting of the unit: Zhongyuan Petroleum Exploration Bureau Survey and Design Institute, the main drafters of this standard: Yang Mingjun, Zhou Tieshuan, Qiao Jiabo, Huang Bo, Ben Xiawei, Liu Xueqin, Li Bo, Zhang Xingfeng
1.0.1 In order to correctly apply the epoxy FRP lining anti-corrosion technology, ensure the anti-corrosion quality of the epoxy FRP lining of steel tanks, and extend the service life of steel storage tanks, this standard is formulated.
1.0.2 This standard applies to Design, implementation and acceptance of epoxy FRP lining anti-corrosion project for steel storage tanks with storage medium temperature not higher than 80℃ and storage medium such as crude oil, sewage and non-ferrous water.
1.0.3 The environmental conditions for the construction of epoxy FRP lining are temperature not lower than 10: and mud density not more than 80%.
1.0.4 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national laws, regulations and relevant mandatory standards in terms of safety technology, labor protection and environmental protection.
1.0.5 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national mandatory standards.2-200251
Method for testing the thread of oil and casing
Screw test
Requirements for equipment of labor protection equipment in oil industry workplacesSY6524-2002
Recommended foam drainage and gas productionSY/I6525-200253
Method for determining the reaction rate of hydrochloric acid and carbonate rocksSYT6526-200254
Method for determining the reaction rate of hydrochloric acid and carbonate rocksSYT6527-200255
Data quality specification
Method for measuring the dielectric constant of the original sampleSY/T6528-2002 2 method
Crude oil depot fixed fire protection systemSY/T6529--2002System operation specification
Inner coating of pipeline for non-corrosive gas transportationSY/I6530---2002
Straight seam resistanceSY/I6531-2002 welded steel pipe for oil well pump body
Standard name
Standard number
Calibration method of induced polarization instrumentSYT6532-2002Stability well test test and interpretationSY/I6533-2002 method
Twin screw oil and gas mixed transmission pump
High pressure gas underground gas storage well
SY/T 6534-2002
SY/I 6535--- 2002
Technical specification for cathodic protection of inner wall of steel water tanks
Analysis method of gas and solution in natural gas purification plantSY/T6537-2002
Formulated selective desulfurization solventSY/T6538-2002
130X seismic data acquisitionSY/I6539-2002System inspection items and technology
Drilling fluid completion fluid damage oilSY/T6540-2(02Indoor evaluation method of layer
Planning, design and construction of fixed offshore platforms SY/T10009-
Recommended practices for 2002
Method 1-Load resistance coefficient
Design method (Supplement 1)
Marine oil route drawing regulations, SY/10028-
Recommended practices for 2002 fixed offshore platform planning, SY10030-
Recommended practices for 2002 fixed offshore platform design and construction-—Working stress design
Method (Supplement 1)
Replacement standard number
SY/T 10009-
SY/r 10030-
Standard name
Specification for submarine pipeline systems
Standard number
SY/T 10037-
73 Recommended practice for planning, design and construction of a fixed offshore platform helicopter SY/T10038 2002
74 Recommended practice for design and analysis of floating structure positioning systems SY/T10040 2002
Recommended practice for installation of electrical equipment in oil and gas facilities SY10041-
2002
Recommended practice for classification of electrical equipment in oil and gas facilities SY10042-
2002
Guide to pressure relief and decompression systems SY/I10043
78 Recommended practice for sizing, selection and installation of pressure relief and decompression devices SY/T10044-
Replacement of standard number SY/T 480492
SY/T 4806-92
SY/T4811—92
SY/F 4809-92
SY/T 4812--92
This standard is compiled in accordance with the spirit of China National Petroleum Corporation's Public Quality and Safety Document No. 12000 No. 31, edited by Puyang Huayou Anti-corrosion Collection Co., Ltd., and participated in the compilation of the former Petroleum Exploration and Acoustic Survey and Design Institute. During the compilation of this standard, the compilation members followed the relevant national policies and summarized the design and implementation experience of epoxy fiberglass lining of steel storage tanks in the oil and gas industry for many years, referred to relevant literature and materials, and formed a draft for soliciting opinions. The opinions of relevant units and experts were widely solicited in two ways: letter review and joint review, and the main issues were repeatedly revised. Finally, the China Petroleum Engineering Construction Professional Standardization Committee reviewed the draft together with relevant departments.
The main contents of this standard include: general, epoxy FRP materials, epoxy FRP grade! Smart structure, epoxy FRP lining construction, quality inspection, repair and rework, sanitation, safety and environmental protection, door information, etc. This standard was proposed by the Second Professional Standardization Committee of Petroleum Engineering Construction and was drafted by Puyang Huayou Anti-corrosion Jizhou Co., Ltd. This standard participated in the drafting of the unit: Zhongyuan Petroleum Exploration Bureau Survey and Design Institute, the main drafters of this standard: Yang Mingjun, Zhou Tieshuan, Qiao Jiabo, Huang Bo, Ben Xiawei, Liu Xueqin, Li Bo, Zhang Xingfeng
1.0.1 In order to correctly apply the epoxy FRP lining anti-corrosion technology, ensure the anti-corrosion quality of the epoxy FRP lining of steel tanks, and extend the service life of steel storage tanks, this standard is formulated.
1.0.2 This standard applies to Design, implementation and acceptance of epoxy FRP lining anti-corrosion project for steel storage tanks with storage medium temperature not higher than 80℃ and storage medium such as crude oil, sewage and non-ferrous water.
1.0.3 The environmental conditions for the construction of epoxy FRP lining are temperature not lower than 10: and mud density not more than 80%.
1.0.4 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national laws, regulations and relevant mandatory standards in terms of safety technology, labor protection and environmental protection.
1.0.5 In addition to complying with this standard, the construction of epoxy FRP lining project for steel storage tanks shall also comply with the provisions of the current national mandatory standards.5. In addition to complying with this standard, the construction of epoxy fiberglass lining projects for steel storage tanks shall also comply with the provisions of the relevant mandatory standards currently in force in the country.5. In addition to complying with this standard, the construction of epoxy fiberglass lining projects for steel storage tanks shall also comply with the provisions of the relevant mandatory standards currently in force in the country.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.