Some standard content:
1CS-71. 100- 01
Chemical Industry Standard of the People's Republic of China
(1999)）
1999-04-20 Issued
2000-04-01 Implementation
PetroChina and Huaxin Industry
Service Case No.: 2795
IIG/T 3601-1999
This standard is based on the test method of disperse dyeing process. The selection of test conditions, the determination of various test methods, and the determination of various technical indicators based on the accumulated data of relevant manufacturers. The technical indicators listed in this standard, such as appearance, color, intensity, diffusion performance, moisture content, dispersion, high temperature dispersion stability, earth color rate, color neutrality, etc., can basically meet the technical level, quality level and application performance of disperse dyeing products. After comparative inspection, the technical indicators of this standard have basically reached? The quality and level of the samples of Resolin Yellcw Brown 3GL from Germany's BAYER company are sponsored by the Technical Supervision Department of the former Ministry of Chemical Industry of the People's Republic of China. The wood standard is entirely sponsored by the Technical Department of Dye Standardization Technical Committee. The drafting units of this standard are Yangyang Chemical Research Institute and Luoxing Fine Chemical Industry. The main drafters of this standard are Tu Zai and Yang Jiajing.67
1 Standard of the People's Republic of China Chemical Industry Standard
Disperse Orange SE-5RL200
(Disperse 3GL)
Jisperar Urangc sk-5RL 200%
(Disperse OrHng 3GL>
HG/T3601—1999
The standard is the score slow SE5RI.(C.[Disperse 2UU also has requirements, sampling, test methods, inspection rules and standard installation, transportation and storage requirements,
The standard standard specifies the dispersed super SE bR made by combining the heavy chemical with the heavy chemical and then combining with the heavy chemical. X.
Structural formula:
Molecular formula CI.N
Relative weight: 377.6 According to the 1995 International Relative Weight 2 Reference standards
The following standards contain texts that constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. The service provider should consider the possibility of using the latest version of the following standards GB/T —!
Dyeing particle dyeing hot setting-plastic conditions are now determined
Determination of moisture content in dyes and potential materials intermediates Branch method 2386-80
Disperse dye bundle color light and intensity determination method GBT
269786
Disperse dye lifting power determination method
392(-1997
Textile color half degree test sequence rubbing color half degree 10123) GBIT
3921.19a7 System fabric color freshness test secondary washing color: test 3(c9VI5)1G5-Cc3:1989) GR
22--95 steel style product evaluation color string test method 110-0493) 1/1 dye dyeing standard depth color:
4641. ---84
Dispersible material dispersion performance test method double filter head method B5 dispersion material high heel separation stability test method GB/T5181
GB/16152
8427-1*98
Textile negative color test: dry heat resistance (hot pressing) color test (11: 1993)
Textile war
Colorimetric test hot color quality (cg15) 11)
Color rate trial production fee color rate bottle point (ENVSO105-02: 1994) 9337-38
Disperse dye particles high temperature color cabinet color rate The preparation method is 3399
Dye diffusion performance determination method
Approved by the State Petroleum and Chemical Industry Bureau on April 20, 1999, and implemented on April 1, 2000
3 Requirements
HG/T3501—1999
3.1 Appearance, reddish brown single color powder or granular, 3.2 Sensitivity 5E5R2 (heart%) and should meet the requirements of Table 1, Table! Dispersed control 5F-RT.CC% of the requirements of the war items
2 burning solid (for environmental non-products
modified, short / short
high quality tax tax light, amount / frequency
: water content -%
two gold Zhuo, Xing
bowl ten for Dun
pear supply version
against
content S is L200% on the pure material frame color should be less than 2 Table 2 F-5R1.253 method in pure polyester fabrics can be used for fastness
4-54--5
Note: 1.3: :. And the corresponding 1 is also called quasi-drying industry, 4 sampling
dry heat
heat resistance
sampling in batches, production 1 is mixed and evenly written in the fire product, each batch of sampling barrels shall not be less than 1U, small batch oxygen production has been sampled by less than 3 people, the sample taken The packaging must be intact to prevent foreign matter from falling into the product when sampling. Take the upper, middle and lower parts of the sample through the pressure probe. The total amount must not be less than 2C3. Mix the new product thoroughly and divide it into two clean and dry color-coded ground-mouth bottles. Stick labels on the bottles: Production date [Product name, batch number, sample date], and store them in paraffin wax. 5 Test method 5.1 Determination of external sampling 5.2 Determination of color and intensity 5.2.1 Use the relevant provisions of GB/T2.74 to carry out the dyeing method according to GB/T2.1. 5.2.? Dyeing depth is the second. Dyeing H2 dyeing ratio is: 13.5.2.3 Dyeing solution is prepared according to the dyeing temperature of the first five minutes. Dyeing bath is determined according to the surface sensitivity. English number 3. 2 g0 mL standard product is easy to dye
and then rolled into the total volume
5.2.4 Certificate
HE/T3601-T999
Table 3 Nest matching system
According to the relevant provisions of GB/T High Strength Engineering Cloud 5.2.5 Determination of color light and point degree
According to the relevant provisions of (BF23?4)
5.3 Determination of expansion performance
According to the provisions of IIG.
According to the provisions of G/T554.
5.5 Determination of commercial stability
According to G/41-S\permeation method\ 5.6 Determination of moisture content
According to the determination of GB2 + "baking method".
5.7 Determination of color
According to the determination of GB/T37 + "radiation method", the temperature of the single deep ring (0.WE) is 13℃, the color rising time is 6min, the measurement is 41℃,
5. Determination of day and month
According to the provisions of G/T7497,
5.9 Determination of color fastness
According to the provisions of GB/T3720: Color fastness
According to the requirements of GB/T3921.3. Color fastness test report G8/T22: Heat fastness test: Dry heat (hot pressing test: color fastness test of half degree, 155715 test, 21n test. Heat fastness test: half degree, amine test according to GB/T (152, 2CC2 pressure waking light hazard test, report E/T total test. 6 Inspection rules
6.1 Inspection points
In the bidding parts, and in Table 1, 2, 1, 5, 6 items are factory inspection items, and items 3.3 in Table 1 are type or control inspection items. The production is accompanied by an annual inspection: Www.bzxZ.net
6.2 Inspection signature
points - S1.200 should be issued by the production 5 standard quality inspection department to allow the inspection standard, production" you record the account! Authorized SE -RI% cup meets the requirements of this standard: Each batch of factory SERI.20U should be accompanied by a sticky quality certificate 6-3 Open acceptance
Use the total position right number service technical mark to check whether the received dispersed SERL2% is in compliance with the requirements of this standard,
E.4 Update
HC/T3601—1999
If there are any indicators that do not meet the requirements of this standard during the inspection, the new white sample or the packaging sample at the end of the year shall be inspected. If only one indicator does not meet the requirements of this standard, the whole batch of products cannot be accepted, and the marking, packaging, storage and transportation are not completed.
7.1. Marking
Dispersible orange SF-RT, 200% packaging insert firmly, the mark indicates: manufacturer name, factory, product name, registration mark, standard number, batch, production date, year and net change. After batch release, the dispersed material shall be in accordance with SF-TRI.2006 with a certain format of quality instructions, including manufacturer name, factory address, product name, batch number, specifications, specifications, product quality certification and label number.
72. Packaging
SE-51L200% Packing: Iron barrel lined with plastic, and stamped with shipping date, net weight of each barrel is 25kg, other packaging can be agreed with the manufacturer.
When transporting, please be careful, avoid shift change, and avoid damage to the packaging. Storage
Dispersed material SE-5KL200≤Store in a cool place. + Dryness x place.1 Avoid adding heat to the stomach during transportation, avoid carbon contact. Y2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.