Some standard content:
All contents of this standard are mandatory. This standard is proposed by the Equipment and Finance Bureau of the Ministry of Public Security. Foreword. This standard is approved by the Technical Committee for Standardization of Police Equipment of the Ministry of Public Security. GA422--20a3. This standard is not funded by Wenzhou Huafa Warning Equipment Co., Ltd., Fujian Quanzhou Yubincheng FRP Products Factory, and Fujian Dongpu Security Equipment Factory. The main drafters of this standard are: Zhang Jiangxian, Ling Dianti, Huang Lixue, Bao Yiyao, Chi Huanran, 1 Fan Guo. Riot shield. 422—2003
This standard specifies the terms and definitions, product classification and designation, key techniques, test methods, inspection rules, tables, installation, installation and maintenance of the standard.
2 Normative references
The following documents are used as the terms of this standard through reference: The referenced documents of the latest period, all subsequent amendments (excluding errors) or downgrades are not applicable to this standard, however, all parties who have reached an agreement on the standard are encouraged to study and use the latest version of the document. For any referenced documents that are not in the same period, the latest version shall apply to this standard. GB/F1720-1579 coating standard GB/T18118S5 paint film color standard
GB/T397815$4
Standard lighting body and lighting test conditions
3 Terms and definitions
The following terms and definitions are based on this standard.
Anti-riot shield
nuti-rlot shield
A plate-type shield used for protection and defense. 3.2
Vision through windowsubscrvulinawindow
In riot control shops, you should place appropriate devices with no danger of small body protection. 3.3
Prolectlen Lealiny arcu
Protection through area
All areas within 5J from the edge of the object, including regulations. 4 Product classification and naming
4.1 Classification
2.1.1 Judging from the optical properties of the materials used in the shield, they are divided into transparent and non-concave types. 1) Transparent material is indicated by "T\", and 2) Non-transparent material is indicated by "k*". 4.1.2 According to the size of the product, it is divided into two specifications. 3) The size 6 is indicated by "\\". 4.2 Naming The product brand is named according to the following structure and requirements: 1) GA 422-2003 Medical Mask Code Material Code Product Name The product brand name is the spelling of the letter FBP): The large transparent anti-riot drug product model is FTP T 1. 5 Requirements 5.1 General requirements 5.1. 1 Appearance requirements
The surface of the quality label should be smooth, without visible concave, convex, bubble, roughness, sharp corner, scratch, grinding spot, degumming and reverse defects. 5.1.2 Mouse color
The color of the surface of the label should be 99% of the common scattered color (monitoring color). 5.1.3 Logo
The front of the anti-recording and dangerous sign should be centered in Chinese font "Warning" and English capital bold "POT.1CF". 5.1.4 5.1.5 Dimensions of handles
The dimensions of the handles shall not be less than gram (height)×2ours (width): 5.1.6 Surface treatment of thick parts
The surface of the structural parts of the protective cover shall be treated with anti-penetration treatment. 5.2 Protection area
The protection area of the protective cover shall be as shown in Table 1:
Table 1 Protection area
The degree of protection shall not be less than 4.3kg.
5.4 Connection strength
The connection between the handles shall be able to withstand 10000K, and there shall be no breakage, vibration or falling off. 5.5 Connection strength
After the buckle of the belt is installed: the connection between the piece and the store should be able to withstand the vertical connection, without any detachment, looseness, detachment or breakage of the belt
5.6 Light transmittance
The shield of the transparent anti-riot sign and the viewing window of the non-transparent anti-riot sign, the light transmittance should be greater than 7.5.7 Impact resistance
The anti-riot sign should withstand the impact of 4 kinetic energy, after the impact The receiving point should have a small hole or be hit outside the receiving point radius mm. If it is a non-explosive shield, the inspection window should not fall off. 5. Daily penetration performance
The anti-chip board uses the standard GA68 combat test tool, 21, kinetic energy, 0\ direction penetration, the force should not pass through the rest, 5.3 Climate and environmental adaptability
The anti-chip board should meet the requirements of .? in the environment of 2U℃~+55℃. 5. 10 Insulation layer adhesion
The protective layer of the anti-ticket board has an insulation layer, and the insulation layer adhesion is obvious (H/12C-1! Level 3 specified in the air) 5. 11 Flame retardancy
The flame retardant should have a flame retardant function, and the flame should not continue to burn for more than 5 months after the flame is isolated. 6 Test method
6.1 Appearance
GA422—2003
Test and inspect the appearance of the flame retardant and its accessories under natural light. The inspection results should meet the requirements of 5.1.1. 6.2 Color
6.2.1 Test device
Color group version: in accordance with GH/SIX-5 specified and the difference meter who confirmed the treasure purchase,
G.2.2 test step requires
with standard color sample and test piece, the car is equivalent to: (B/T 78-1994 standard [% light source service for comparison, qualitatively determine the report will meet the specified requirements; if there is a qualitative judgment on the actual comparison, the standard D of GB/T3S7B1994 should be used, light source. Measure more children conditions: C/D. Use color meter to check the color and chromaticity of the deputy head. The inspection result should meet the requirements of 5.1.2.
6.3 Protection area and viewing window size inspection
Use universal measurement of the width and length of the viewing shield and the commercial value, and calculate the area and the result meets the requirements of 5.2 Table 1, use universal measurement to measure the size and height of the viewing system, the result should meet the requirements of 5.2 Table 1, 5.1. Definition of riot shield. 6.4 Quality inspection and supervision
Use a reliable scale with a scale value of 1:8. The quality of the riot shield shall meet the requirements of ?. 6.5 Handle joint strength test
6.5.1 Test device
Heat treatment force
6.5.2 Test steps
Apply a tensile force of 0N between the handle and the body of the shield, and the test results shall meet the requirements of 5.6. 6.6.1 Test device: test ... b: Place the illuminance value on the bottom of the test finger and record the illuminance value (yuan). Cut the transparent material or non-transparent window material of the shop sign into 430×42-111 size GA4222003 or sample and place it on the opening of the test box. Record the value (%). Calculate the light transmittance (V) according to the following formula. The calculation result should meet the requirements of 5.6. 6. Day impact strength test.
6.8, 1 Test full-mount
Outside size 00m5000m Size 603mm321 Material plate (mm×mK5m Test wood format) Falling test: 6.8.2 Test steps
Place the whole board horizontally, with the board spacing not less than 350mm, and then place the plate with the lip protection facing up on the lower pad. Use a 5.5kg head-shaped shield to fall from the center of the test area. Test? times, 2 times, 1 time. 2 The distance between the test points should not be less than 290mu, and the results should meet the requirements of 5. 6.9 Puncture resistance test
6. 9.1 Test load
Bensong (size 860mm×500mX100mm inner size t0mm×300E×100m pine wood village interpretation) Mengqiang (60) mm40mtX5m extreme Benshu sample) drop impact test machine GA standard cavity 6. 9.2 Test steps
Place the object in the frame, and then collect the matching single board on it. After that, it will not dry. 0mmM: Then put the test part of the protective equipment or the sub-pad on it, and aim the test point at the test machine center, fix the standard test knife on the drop test, adjust the drop test volume and height so that the kinetic energy of the test knife is J when it only pierces the surface of the object, start the test, and conduct the same test on the protection test area twice. Observe and balance once in total. The result is that the seat effectiveness meets the requirements of 38. 5.10 Air exchange environment avoidance test
6..1 The quality brand sample will be placed in a 22-inch sales box for a strong illumination test-war inspection within 10mm. The result: it should meet the requirements of 5,7. 6.10.2 Keep the fire retardant sample in a rewarming rack at a temperature of 55%:2 for 4 h, and then carry out the resistance test at a ratio of 1 mm to 50%. The result shall meet the requirements of 5.7. G.11 Coating adhesion test shall be carried out in accordance with the provisions of G/1720-1979. The result shall meet the requirements of 3.10. 6.12 Resistance to baking test 6.12. Test apparatus 2 gasoline lamp, 70% gasoline 6.12.2 Test steps 1. Place the flame shield upright, and adjust the length of the gasoline spray flame to 230m71. The flame should make an angle of 1 with the surface of the material, the distance from the nozzle to the surface of the material should be 30mm, and the time between the nozzle and the surface of the material should be 10. After the flame is moved back and forth, the burning time of the material should be determined. 5.! The requirements of the inspection and testing are as follows. The inspection is divided into the production inspection and acceptance inspection. 7.! The factory inspection consists of 3 acceptance batches. A inspection batch (return batch): acceptance products, digital inspection batch (remote inspection batch), delivery products. Sampling inspection: (inspection method (cycle), once a year. 7.2 Inspection items. The inspection date and the frequency sequence of the abandoned inspection shall be filled in. The requirements, test methods, and non-conforming types are specified in Table 2. 7.3 Type inspection. If one of the following conditions occurs, the type inspection shall be carried out: new product inspection and teaching. The product is lightly stopped for one car and then resumed production: h. c) When the product structure is changed, the use of materials is changed! 4) The contract requires fees or the management department to issue a type inspection. 7. 4 Sampling rules for inspection and batch grouping
The samples for inspection batches shall be taken from the qualified batches entrusted by A; the samples for inspection shall be taken from the qualified batches of B inspection batches produced in the short term: the samples of inspection batches and inspection batches shall be taken from the qualified batches of B inspection batches produced in the short term;
GA 422—2003
1) The samples for type inspection shall be taken from the qualified batches of B inspection batches produced in the short term, and the number of samples shall not be less than 4: 7.4.2 Batch grouping rules
The products manufactured by the same batch of raw materials according to the same design and the same production process shall be taken as a batch for inspection, and the number of batches shall not exceed 10.
7.5 Judgment rules
If any non-compliance occurs in the A inspection, the product shall be judged as non-compliant, and the rest of the inspection batches shall be judged as qualified according to the test items specified in Table ?. If two or more items are not qualified, the samples shall be judged as non-compliant. If the sample does not meet the requirements, double the selection and retest will be carried out. If the retest fails, it will be judged as an unqualified batch, and if the retest passes, it will be judged as a qualified batch. The test items in the table are in the order of the items to be tested. The state-owned enterprises shall strictly pay attention to the requirements of the test items. The light transmittance and impact strength of the sample shall be strictly controlled. The suitability of the sample to the environment shall be guaranteed: The adaptability to high quality of the sample shall be guaranteed. The non-conforming sample shall be inspected by the factory. Note: The sample shall be inspected by the factory. 1.2 The sample book of each type of control items shall be compared with the overall specification. Note 2 The inspection data in the table shall be carried out according to the serial number, special inspection test section number, and the packaging, transportation and storage. 8.1 Marking: There shall be a permanent water mark on the anti-riot shield. The core shall be clearly marked and the marking shall include the following contents: b) product appearance, specification, batch number or production month.
The packaging of the product should be convenient to ensure that it will not be damaged during transportation. The product packaging box should contain the product certificate and the following information: a)
Factory name and label:
Product model and serial number,
Number and gross weight:
Factory delivery date:
External size: [Length].
8. 3 Transportation and storage
6.3.1 When transporting the product, it should be installed in a safe place to prevent damage from heavy rain, noise and chemicals. 6. 3.2
The product should be stored in a warehouse with a height of more than 250m and a thickness of not less than Cmm. The product cannot be stored with volatile materials and should be away from heat sources. 5.3.35. Judgment rules
A If any non-compliance is found in the inspection, the product will be judged as non-compliant. The rest of the batches will be inspected according to the test items specified in the table. If two or more items are not qualified, the sample will be judged as qualified. If the sample is non-compliant, it will be re-tested. If it fails the re-test, it will be judged as a non-compliant batch. If it passes the re-test, it will be judged as a qualified batch. The inspection items in the table and the order of the inspection items are strictly prohibited. The inspection items in the table are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. 1.2 The sample book of each type of control items shall be compared with the overall specification. Note 2 The inspection data in the table shall be carried out according to the serial number, special inspection test section number, and the packaging, transportation and storage. 8.1 Marking: There shall be a permanent water mark on the anti-riot shield. The core shall be clearly marked and the marking shall include the following contents: b) product appearance, specification, batch number or production month. bZxz.net
The packaging of the product should be convenient to ensure that it will not be damaged during transportation. The product packaging box should contain the product certificate and the following information: a)
Factory name and label:
Product model and serial number,
Number and gross weight:
Factory delivery date:
External size: [Length].
8. 3 Transportation and storage
6.3.1 When transporting the product, it should be installed in a safe place to prevent damage from heavy rain, noise and chemicals. 6. 3.2
The product should be stored in a warehouse with a height of more than 250m and a thickness of not less than Cmm. The product cannot be stored with volatile materials and should be away from heat sources. 5.3.35. Judgment rules
A If any non-compliance is found in the inspection, the product will be judged as non-compliant. The rest of the batches will be inspected according to the test items specified in the table. If two or more items are not qualified, the sample will be judged as qualified. If the sample is non-compliant, it will be re-tested. If it fails the re-test, it will be judged as a non-compliant batch. If it passes the re-test, it will be judged as a qualified batch. The inspection items in the table and the order of the inspection items are strictly prohibited. The inspection items in the table are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. The inspection items are strictly prohibited. 1.2 The sample book of each type of control items shall be compared with the overall specification. Note 2 The inspection data in the table shall be carried out according to the serial number, special inspection test section number, and the packaging, transportation and storage. 8.1 Marking: There shall be a permanent water mark on the anti-riot shield. The core shall be clearly marked and the marking shall include the following contents: b) product appearance, specification, batch number or production month.
The packaging of the product should be convenient to ensure that it will not be damaged during transportation. The product packaging box should contain the product certificate and the following information: a)
Factory name and label:
Product model and serial number,
Number and gross weight:
Factory delivery date:
External size: [Length].
8. 3 Transportation and storage
6.3.1 When transporting the product, it should be installed in a safe place to prevent damage from heavy rain, noise and chemicals. 6. 3.2
The product should be stored in a warehouse with a height of more than 250m and a thickness of not less than Cmm. The product cannot be stored with volatile materials and should be away from heat sources. 5.3.3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.