Some standard content:
Chemical Industry Standard of the People's Republic of China
HG / T 2619— 94
Published on April 13, 1994
Aluminum Plate Base
Implementation on January 1, 1995
Ministry of Chemical Industry of the People's Republic of China
Chemical Industry Standard of the People's Republic of China
PS Plate. Aluminum Plate Base
Subject Content and Applicable Scope
HG / T 2619— 94
This standard specifies the product classification, technical requirements, inspection rules, marking, packaging, transportation and storage of PS plate aluminum plate base. This standard applies to PS plate aluminum plate base.
2 Reference standards
Metal tensile test methods
GB2283
GB/T3190 Chemical composition of aluminum and aluminum alloy processed products GB3199 Packaging, labeling, transportation and storage of aluminum and aluminum alloy processed products CB6987 Chemical analysis of aluminum and aluminum alloys
3 Product classification
3. 1 Shape
Aluminum substrates are divided into plates and strips according to their shapes
3.2 Alloy grade, state and specification of aluminum substrates 3.2.1 The alloy grade, state and specification of the plates shall comply with the provisions of Table 1, Table 1
Alloy grade
3.2.2 The alloy grade, state and specification of the strip shall comply with the provisions of Table 2. Approved by the Ministry of Chemical Industry of the People's Republic of China on April 13, 1994
Length × Width
1310 × 1120
1270 × 1035
1260 × 1000
1030 × 770
920 × 760
905 × 565
830 × 645
670 × 645
550 × 650
370 × 450
280 × 390
Implemented on January 1, 1995
Alloy Grade
L1, L2. L3
HG/T2619
0. 15~0. 30
5001600bZxz.net
3.2.3 If the purchaser has other special requirements, the supply and demand parties shall negotiate separately and indicate them in the contract. 3.3 Marking example
Inner diameter of strip sleeve
505~510
a. Made of industrial pure aluminum with alloy grade L2, the plate is in hardened state with a thickness of 0.28mm, a width of 760mm and a length of 920mm, marked as:
Plate: L2Y0.28×760×920HG /T2619-94b. The cold-worked hardened strip made of pure aluminum with alloy grade 1050, with a thickness of 0.30 mm and a width of 1000 mm, is marked as:
Strip: 1050H180.30×1000HG/T2619944 Technical requirements
4.1 Chemical composition
4.1.1 The chemical composition of alloy grades L1, L2 and L3 shall comply with the provisions of GB/T3190 4.1.2 The chemical composition of alloy grade 1050 shall comply with the provisions of Table 3. Table 3
Alloy grade
4.2 Dimensions and allowable deviations
4.2.1 The thickness and allowable deviation shall comply with the provisions of Table 4. Friction
0. 15 ~ 0. 28
0. 29 ~ 0. 30
4.2.2 Width allowable deviation: mm
4.2.3 Plate length allowable deviation: ±2mm
4.2.4 The allowable deviation of the length of the two diagonals of the plate shall comply with the provisions of Table 5. 2
≤.0. 05
Allowable deviation
HG / T 2619 — 94
4.2.5 Unevenness, plate not more than 4m, strip not more than 3mmAllowable deviation
4. 2.6 The number of waves shall not exceed three per meter length. For plates less than 1Ⅱ, no more than three 4.2.7 The strip shall be rolled tightly, the parts shall be neat, the tower shall not exceed 20mm, the staggered layer shall not exceed 5mm, 4.2.8 The allowable deviation of the side straight line of the strip shall not exceed 2m per meter length. Side straightness tolerance
Side straightness deviation diagram
4.2.9 The edges of plates and strips should be flat, without cracks and burrs. 4.3 Mechanical properties
The transverse mechanical properties should meet the following requirements: tensile strength 127N/mm;
elongation 1%
4.4 Surface quality
4.4.1 The surface roughness is measured by the arithmetic mean deviation Ra of the transverse wheel hemp, and its value is not greater than 0.34m.4.4.2 The rolled surface should be well processed, and no defects such as cracks, corrosion, pores, folds, and serious scratches that affect use are allowed
5 Test method
5.1 Chemical composition
The arbitration analysis method shall be carried out in accordance with GB.6987. No less than 1 sample shall be taken each time.5.2 Dimensions
Measured with instruments or measuring tools that can ensure accuracy. The thickness is measured at a distance of not less than 10 m from the edge, and each item is sampled at least 1 time.
53 Mechanical properties
HG / T 2619-94
The test method is in accordance with GB 228. Each time, no less than 2 samples are sampled, and the average value is taken as the result. 5.4 Surface quality
5.4.1 The transverse surface roughness is measured by a roughness measuring instrument with an accuracy of 0.01 m. Five points are marked on each sample surface, and the average value is taken as the result. Each time, no less than 1 sample is sampled.
5, 4. 2 Other surface qualities are measured by eye, and no less than 1 sample is sampled each time. 6 Inspection rules
6. 1 Inspection
The plates and strips shall be inspected by the supplier’s technical inspection department and the quality shall be guaranteed to meet the requirements of this standard. 6.2 Inspection items and sampling
Inspection items, inspection batch and inspection rate shall be in accordance with the provisions of Table 6. Table 6
Inspection items
Chemical composition
Allowable deviation of external dimensions
Transverse mechanical properties
Transverse surface roughness Ra
Surface quality
Other surface qualities
6.3 Determination of inspection results
Inspection batch
Inspection of each item
Reasonably determined by the batch manufacturer
Not less than 1 time per batch
Not less than 5 times per batch
Not less than 1 time per batch
Not less than 10 times per batch
For any unqualified index in the test results, double sampling shall be taken from the original inspection batch number, and the unqualified items shall be re-inspected. If all the re-inspection results are qualified, the batch of products shall be judged to be qualified. If one item or one index is still unqualified in the re-inspection, the product shall be judged to be unqualified. 6.4 Quality Assurance
For products that have been qualified by the supplier and accepted by the purchaser, the purchaser may re-inspect any item according to this standard. If any qualified item is detected in the re-inspection, the batch products containing unqualified items shall be returned or exchanged after confirmation by the supplier. In case of quality disputes, the national quality supervision unit shall conduct arbitration according to the provisions of this standard. 7 Marking, packaging, transportation, purchase and storage
7.1 Marking
7.1.1 The marking of the packaging box shall comply with the provisions of GB·3199. 7. 1.2
On the accepted stacks and rolls, the following marks shall be marked: inspection stamp of the supplier’s technical supervision department;
alloy grade;
supply status;
dspecification;
ebatch number
7.2 Packaging, transportation and storage
The plates are not coated with anti-rust oil, and the plates are not packed with paper. The strips are packed firmly and moisture-proof. The specific packaging method shall be formulated by the supplier. Other requirements shall comply with the provisions of GB3199. Each batch of plates and strips shall have a quality certificate that meets the requirements of this standard, which shall indicate: Supplier name:
Alloy grade:
Supply status;
Specification:
Batch number:
Weight or number of sheets;
Mechanical properties test results;
This standard number:
Signed by the supplier's technical supervision department;
Packing date,
Additional instructions:
HG/T2619-94
This standard is proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China, and this standard is under the jurisdiction of the First Film Factory of China Lucky Film Company. The responsible drafting unit of this standard is Chongqing Aluminum Products Processing Factory. The participating drafting units of this standard are China Printing Science and Technology Research Institute, China Printing and Equipment Industry Association, China Lucky Film Company Second Film Factory, Southwest Aluminum Processing Factory; Northeast Light Alloy Processing Factory, Hubei Text No. 605 Factory, North China Aluminum Processing Factory. The main drafters of this standard are Luo Zhengqin, Yue Demao, Hou Muqiang, Wang Lei, Yu Jinglan, Wang Lijin, and Yuan Pu. Huang Yongqing, Qiang Wei, Cheng Sen, Yong Li,
People's Republic of China
Chemical Industry Standards
PS Plate Aluminum Plate Base
HG/T2619-94
Editor Chemical Industry Standards Editorial Department
(Standardization Research Institute of Ministry of Chemical Industry)
Postal Code: 100011
Printing Standardization Research Institute of Ministry of Chemical Industry
Copyright Exclusive Use, No Commercial Printing Allowed
Format 880×12301/6 Number of Words on a Printing Sheet 10000 First Edition in December 1994
First Printing in December 1994
Number of Prints 1-500
Cost 2.60 Yuan
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.