Introduction to standards:
This standard specifies the content and use of the marking of commercial wood and its products. The commercial wood and its products referred to in this standard include logs, sawn timber, wood-based panels and other wood materials that enter the commodity circulation field, as well as semi-finished products and finished products made of wood materials. This standard applies to the production, distribution, storage, transportation, quality inspection and use of commercial wood and its products. SB/T 10383-2004 Marking of commercial wood and its products SB/T10383-2004 Standard download decompression password: www.bzxz.net
This standard specifies the content and use of the marking of commercial wood and its products. The commercial wood and its products referred to in this standard include logs, sawn timber, wood-based panels and other wood materials that enter the commodity circulation field, as well as semi-finished products and finished products made of wood materials. This standard applies to the production, distribution, storage, transportation, quality inspection and use of commercial wood and its products.
Some standard content:
ICS_65.020.01
Series No.: 14164—2004
People's Republic of China Domestic Trade Industry Standard SB/T 10383--2004
Mark of wonrl and weorl prhducis in Issued on August 4, 2004
Ministry of Commerce of the People's Republic of China
Implementation on January 1, 2005
SB/T10383—2004
Wood Insert Standard mainly stipulates the use of marking methods for commercial wood and its products: In order to avoid the mutual interference of standard words, there is a general standard. The content of the mark is divided into two parts, and the mark of wood products and other types is specified in this standard. The Ministry of Commerce of the People's Republic of China proposes this standard. The drafter of this standard is: Technical Material Development Center. The drafters of the technical standard are: Xiang Jiusi, Bo Yiwei, Yu Xinghua, Hao Lianghua, Chen Xinmin, Tu Zaokang, Zhang Zhaozhong. This standard requires the village medical center to be responsible for the interpretation of this standard. 1 Scope || tt || Commercial wood and its products marking || tt || This standard specifies the contents of the marking of commercial wood and its products. SEI/T 103932004
The three standards for commercial wood products include all the finished materials such as wood, lumber, artificial boards, etc. that must be passed through the production and sales process, as well as the semi-finished products and finished products that must be produced by the technology.
The industry is responsible for the production, sales, storage, transportation, quality inspection and use of commercial wood and its products. 2 Normative reference documents
The clauses in the planning documents become the clauses of the wood standard book through reference in the standard. All the documents are referenced documents in the whole period, and some of them may be amended later, excluding the specified version, which is not suitable for wood. However, the parties involved in the cooperation have reached an agreement on whether to use the latest versions of these documents according to this standard. It is unknown whether the latest versions of these documents are suitable for wood standards. (GB/T48221999 boiler material inspection
15/1-2003 flower board for all pull-out single internal requirements GB/T5841999 joinery line
H/T9H15.1-19RR plywood general this according to the actual situation. Packaging, transportation and storage GB/T19.7
timber making process certificate
t5/1 12625.2—1040
GE/T 14 9-1492
G5/T 14732
G3/T 1EGR5—1www.bzxz.net
G5/T 15787
G3:T 167H4
GB/T181C7
Technical requirements
Hard fiberboard
Terms for wood anti-corrosion
Terms for raw formaldehyde, aldehydes and aldehydes in raw resin wood
Terms for raw wood
China National Standard for the Design of Raw Materials
tHS/T 8E12-2001
China National Standard for the Design of Raw Materials for Interior Decoration and Renovation
Limited emission limits for formaldehyde in artificial boards and their products GR1FERT
GB18581Limited emission limits for indoor decoration and renovation materials LY/T 12X0-IS58
-Y/T 1511--2003
1.Y/T 1.Am 20CC
3 Terms and definitions
Wood industry reform and development
Log production standard
Directional innovation
GB/11917-9H9,CR/T1401919$2,GB/T1533-1UU1.CB/T157871995,1.Y/T17S199% confirmed technical commitment and definition for 4.1 General provisions 4.1.1 Classification of wood species and their products: The Chinese name and the species name shall be used to mark the species name. The species name of domestic timber shall be in accordance with R/T167H1-1997, and the species name of imported timber shall be in accordance with (B/T185_3-2)01. IC383-2004, the red version of the species name shall be in accordance with 6/18103-203, and the Latin name shall prevail if there is no standard for the tree species. Wooden parts made of multiple species shall be marked with the species of the raw materials. 4.1.2 Product name and trademark
Commercial wood products shall be marked with the common product name (name) and trademark, and the trade name shall not be used. 4.1.3 Grade symbol
The grade of commercial raw materials and their products shall be marked with the corresponding symbol (table) according to the different grade standards of the wood and its production quality
|4. 1. 4 Measurement units
Table 1 Other symbols
The measurement units of commercial raw materials and their products shall be recognized by the state of production 4. 1. 5 Production unit (factory, site:
Trade materials and their products shall be marked with the full name of the production unit (), site), and the unit code in the registered trademark of the unit may be used for barcode marking.
4.1.6 Production date
Trade products shall be marked with the number of production, month, and year. 4.1.7 Water content
Trade materials and their products that have been treated shall be marked with the name of the factory. 4.1.8 Treatment method
Trade wood and its products that have been treated with chemical agents shall be marked with the name of the chemical agent used in Chinese or English. 4.1.9 Quality inspection agency mark
Trade materials and their products that have been tested shall be marked with the full name of the quality inspection agency in Chinese, and may also be marked with a barcode by reducing the unit code in the registered trademark of the agency.
4.1.0 Certification mark
The certified wood and its products can be marked with the certification mark within the validity period of the certificate. 4.1. 11 Precautions
For commercial wood and its products that are easy to burn, burn, burn, change or cause safety hazards to the environment and human body, the operation, storage, processing, use and handling of the wood and its products should be in accordance with the national standards, industry standards and local standards. The detailed installation, connection and use instructions should be provided. 4.2 Log marking
The grade, length, grade, species mark and number printing shall be carried out in accordance with the provisions of 1.Y/T1311-2002. 4.3 Marking of sawn timber 4.3.1 Specification According to the current technical regulations of GB/T 487197, length, width and thickness shall be marked with numbers. 1.3.2 Generally, sawn timber shall be marked in accordance with the technical specifications of GB/T 4825-923 or the grade number, etc. 4.4 Marking of man-made board 4.4.1 Applicable varieties Man-made board is applicable to carbon fiber board, pattern board (SB), fine grain board and various decorative boards, etc. 4.4.2 Specification The length, width and thickness shall be in millimeters, with the unit of measurement being 1/40 mm. 4.4.3 SHT 103B3-2004
The grade of artificial board shall be marked in Chinese or in accordance with GB/T98167-1966, GB/T12626.21990, GB/4897.1-2003LY/T150-000, T6-999. 44.4 Adhesive
Artificial board shall be marked in accordance with GB/T1473%-1993, 1, Y/124(1996), and the name of the adhesive used in production shall be marked in Chinese.
4.4.5 Aluminum release limit and implementation standard
Artificial board bottom safety CB1858℃ stipulates: Marking of formaldehyde release limit and implementation standard, 1. 5 Wood product mark
4.5.1 Applicable varieties
Wood product mark is used for cross-jointed wood materials + production capacity finger-jointed wood, integrated wood, solid wood flooring, solid wood composite flooring, grade laminate flooring, wood structure, wood line bearing, sleepers, wood, cabinets, furniture, door rot, fish liver, stationery, toys, chopsticks, toothpaste, etc. 4.5.2 Specifications
This product should be marked with specifications according to different product sizes 4.5.3 The quality grade of the product received by the quality inspection department shall be marked according to the Chinese or unified standards. 4.5.4 Limit of harmful substances
When the product is specified in B15, the harmful substance content shall be marked. 4.5.5. Factory address and contact information
Furniture, door seals, floors, furniture, stationery, toys, micro-pieces, signs and other unfinished products that can be directly used should be produced in accordance with environmental protection regulations! Detailed information:
5 Method of marking
5.1 Commercial wood and its products should be marked in a clear position without affecting the product quality and use.
5.2 Commercial wood and its products can be marked in a clear position with the help of the company's product logo, nameplate, etc.: There are standards for marking, but no standards can be determined by the product size. 5.3 Commercial wood and its products should be marked with Chinese characters in the mark, and the barcode should be in accordance with the national standard. The barcode should contain Chinese characters, Chinese characters and letters: The size of the barcode should be less than 18.6.
6.1 Commercial wood and its products should be marked in a clear position without affecting the product quality and use. 6.2 The log mark should be marked on the original cross section or near the end. 63 The sawn timber mark should be marked on the new or near-end timber. 6.4 The wood-based panel mark should be marked on the end or back surface. 6.5 For timber and its products sold on the market, the mark should be marked on the obvious position of the product without affecting the appearance of the product before use. For timber and its products sold in batches, produced, used, and used, with the consent of the purchaser, the mark can be used only on similar products, and the content of the mark specified in the standard can also be indicated in the contract or product manual: 6.6 For timber and its products for outer packaging, the mark should be marked on the obvious position of the outer packaging. If there is no packaging, specification, or standard, it is advisable to mark it on the product. It can be marked in the form of a manual or a single label at the stacking place.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.