HG/T 2974-1999 Industrial 30% trimethylamine aqueous solution HG/T2974-1999 Standard download decompression password: www.bzxz.net

[cs 71. 080 3]
Chemical Industry Standard of the People's Republic of China
Organic Chemical Products,
(1999)
Issued on 1999-06-16
Implemented on 2000-06-01
Issued by the State Bureau of Petroleum and Chemical Industry
Record No.: 37301999
HG/2974—1999
This standard is revised from HG/T2974—1988, a national standard. Compared with HG/T2974—1983, the standard has been revised in terms of text and technical content. From the date of implementation, this standard replaces HG/2974—1993. This standard was proposed by the Technical Supervision Bureau of the former Ministry of Chemical Industry of the People's Republic of China. This standard was drafted by the National Chemical Standardization Technical Committee and the main drafters of this standard, Jiangshan Chemical Plant. The main contributors to this standard are: Sun Jianmin, Tai Xinfang, Chu Yuhua, Liu Ying and Zhu Daozhang. This standard was first issued as a national standard in 1988, and was promoted as a national standard in 1997. It was newly confirmed by the National Chemical Standardization Technical Committee. This standard contains organic components with negative volatile organic compounds. Scope: Chemical Industry Standard of the People's Republic of China: Solutlons of oy: trimethylamine for industrial uae HG/T 2974—1999 Code: G71-19 This standard specifies the requirements for sampling, test methods, marking, color, transportation and storage of 3-hydroxy-3-methylamine aqueous solutions prepared from diamine. This standard applies to the three-component modified liquid produced by the gas phase catalytic catalysis of methanol. The molecular formula is (CHN
) The molecular weight is: 59.11 (according to the 1995 International Standard for Atomic Mass 2 References
The following standards contain provisions that are referenced in this standard or constitute provisions of this standard. When the standard was published, the versions shown were valid. All standards may be revised. All parties using this standard should use the latest version of the following standards as much as possible. GB/T 190-9 Dangerous goods color packaging symbols
(B/32-91 Packaging barrels
GB/5678R6 Chemical product procurement
GB/T 868086
General rules for liquid chemical products
Expression and determination methods of limit values ​​GB/T12bU--$9bZxz.net
Test methods for water solubility in industrial wastewater
HG/F2971---1999
Rules for the management of dangerous goods for railway transportation Ministry of Railways Railway Transportation (1995.10 Document 3 Requirements
3.1 Appearance, colorless and transparent body,
3.2 The quality of 30% amine aqueous solution should meet the requirements of Table 1, *1 Quality requirements for 31% amine aqueous solution E
Methyl N]
-, Methyl _: H,, NH]
|Dimethoxy N
Line: N,
4 Sampling
Superior products
Qualified products
4.1 Industrial 3%-H water-reduced product skin 4 Factory standard quality inspection department 1 Sampling.4.2 Products are sampled as a batch of uniform quality. 4.3 Soft price method: G/T6878 and GB/1668 relevant regulations are carried out. The number of barrel sampling units is in accordance with C55578-86 National Bureau of Petrochemical Industry 999-06-16 approved 200006-01 implementation
HG/r29741999
Table? Refund. When loading the car, the book can be regarded as a car according to 6B66 985 2.3 Sampling. The minimum sampling volume shall not be less than 500mL. Put the samples into two clean, well-sealed bottles, label them, and indicate: manufacturer name, product name, batch number, cumulative sampling date and name of the sample provider. Each bottle shall be retested and kept in a warranty register for two months. 4.4 Users shall accept the products within 20 days after receiving the products in accordance with the requirements, sampling and testing methods specified in the document standard. 4.5 The inspection results shall be carried out by comparison of drug values ​​(B/1251). If one of the indicators in the inspection results does not meet the requirements of this standard, the other two packaging units shall be retested, and the inspection results shall be deemed not to meet the requirements of this standard even if only one indicator is found to be non-compliant with the requirements of this standard. 5 Test methods 6 Marking, packaging, transportation and storage 6.1 The packaging container should have obvious markings including: manufacturer name, address, product name, trademark, date of production or product number, this label and the mark of "flammable product" in G:R19. 5.2 Each product leaving the factory should be accompanied by a quality certificate, including: manufacturer name, date of production, grade, batch number, net content, this label. 6.3 The product can be loaded in steel grid cars or steel trucks and barrels. The packaging should be inspected and accepted according to G132; after loading, the barrel should be tight and leak-proof.
6 Triamine is easily ignited. The container containing this product should not be stored outdoors. It must be kept away from fire sources and dangerous goods. Avoid commercial spills.
65 The transportation of this product shall be carried out in accordance with the current regulations on railway dangerous goods transportation and other regulations on dangerous goods: Safety
7.1 This product is flammable. Avoid high temperature and contact with open flames. 7.2 This product is toxic and corrosive. Avoid contact with fat and skin. 7.3 This product should be separated from magnetic chemicals and common oxidizing chemicals.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.