This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of straight and curved edge banding machines. This standard applies to straight and curved edge banding machines (hereinafter referred to as machine tools). QB/T 1595-1992 Straight and Curved Edge Banding Machines QB/T1595-1992 Standard download decompression password: www.bzxz.net

Light Industry Standard of the People's Republic of China
Straight and Curved Edge Banding Machine
1 Subject Content and Scope of Application
QB/T 1595—1992
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of straight and curved edge banding machines. This standard applies to straight and curved edge banding machines (hereinafter referred to as machine tools). 2 Reference standards
GB/T191 Packaging, storage and transportation pictorial signs
GB/T5226 General technical conditions for machine tool electrical equipment JB/T8 Product label
JB/T1471 Technical conditions for export machine tool packaging JB/T4171 General rules for precision inspection of woodworking machine tools QB/T842 General technical conditions for light industrial machinery scales ZBJ65015 Method for measuring noise (pressure) level of woodworking machine tools ZBY96006 Method for compiling furniture machine models 3 Product classification
The machine model should comply with the provisions of ZBY96006. 4 Technical requirements
The straight and curved edge banding machine should comply with the requirements of this standard and be designed and manufactured in accordance with the drawings and technical documents approved by the prescribed procedures. 4.1 Processing quality
4.1.1 The surface of each roller should be smooth and the roughness R. should not exceed 0.8μm. 4.1.2 The purchased accessories and standard parts shall comply with the current standards to ensure reliable performance. 4.2 The electrical system shall comply with the provisions of GB/T5226. 4.3 Appearance quality
4.3.1 The exposed processing surface shall not have defects such as rust, bruises, burrs, etc. 4.3.2 The assembly and joint surfaces of parts shall be neat and there shall be no obvious misalignment. 4.3.3 The quality of paint shall comply with the relevant provisions of QB/T842. 4.4 Machine tool accuracy
4.4.1 Before the machine tool inspection, the straight and curved edge banding machine shall be in a natural leveling state. 4.4.2 During the inspection, if it cannot be measured within the specified range, it shall comply with the provisions of Article 2.2.1 of JB/T4171. 4.4.3 When other inspection methods are used, their accuracy shall not be lower than the accuracy of the inspection method in Article 4.4.4. 4.4.4 Geometric accuracy
The geometric accuracy shall comply with the provisions of the following table.
Approved by the Ministry of Light Industry of the People's Republic of China on August 31, 1992 and implemented on April 1, 1993
Note: The "△\" in the inspection diagram refers to the tolerance value of this item. 4.4.5 Working accuracy
The glue coating is uniform, and the glue coating surface reaches more than 95%.
5 Test method
QB/T1595-
Inspection items
Verticality of the pressing roller, feeding roller and working table
Parallelism of the pressing roller and feeding roller
Parallelism of the pressing roller and the coating roller
The geometric accuracy and working accuracy of the machine tool shall be carried out in accordance with the provisions of Article 4.4.5.1
5.2 Appearance quality Inspect by visual inspection. It shall comply with the provisions of Article 4.3. 5.3 Idle running test
5.3.1 There shall be no abnormal vibration and noise during idling for 1 hour. 5.3.2 Start and stop 10 times continuously to test the reliability of the action. 5.3.3 Test the flexibility of the operating mechanism by visual inspection. Tolerance
Inspection method
Put a square on the workbench close to the rolling surface, use a feeler gauge to measure the gap and measure its maximum value
Bring the two rollers together, use a feeler gauge to measure the gap
and the maximum value measured when the rollers rotate one circle
Bring the two rollers together, use a feeler gauge to measure the gap
and the maximum value measured when the rollers rotate one circle
5.3.4 The sound pressure level of the machine tool operation noise shall not exceed 85dB(A). Inspection The method shall be carried out in accordance with the provisions of ZBJ65015. 5.3.5 The electrical system works accurately and reliably. The test shall be carried out in accordance with the provisions of GB/T5226. 5.4 Load test
Carry out glue coating test at various speeds.
The edge banding quality inspection is generally carried out at the manufacturer and at the user's factory when necessary. 6 Inspection rules
The machine tool shall be inspected and qualified by the factory inspection department in accordance with the provisions of this standard, and a certificate of conformity shall be issued. 6.1
6.2 The edge banding machine shall be inspected at the factory in accordance with Article 4.4 and may only leave the factory after passing the inspection. 6.3 Type inspection
The type inspection items are all the technical requirements of this standard. Type inspection must be carried out when one of the following situations occurs: 52
Trial production of new products or transformation and appraisal of old products; QB/T1595-1992
After formal production, when there are major changes in structure, materials, and processes that may affect product performance; when the national quality supervision agency proposes to conduct type inspection; during normal production, inspection is conducted once a year; when the product is resumed after a long period of suspension; when the factory inspection results are significantly different from the last type inspection. 6.4 Type inspection rulesWww.bzxZ.net
For products produced in batches, each batch shall be randomly inspected at a sampling rate of 10%, and no less than one batch shall be inspected. If it fails to meet the requirements, double the inspection. If it still fails to meet the requirements after double inspection, the batch of products shall be judged as unqualified. 7 Marking, packaging, transportation, storage
7.1 Marking
Fix the sign at the appropriate position of the machine tool. The type, size and technical requirements of the sign shall comply with the provisions of JB/T8. 7.2 Packaging
The packaging of machine tools shall comply with the relevant provisions of QB/T842 and GB/T191, and the export of machine tools shall comply with the provisions of JB/T1471. 7.3 Transportation
The transportation shall comply with the relevant provisions of QB/T842 and the relevant transportation department documents. 7.4 Storage
The products shall be stored in a rainproof and ventilated warehouse. Additional remarks:
This standard was proposed by the Technical Equipment Department of the Ministry of Light Industry. This standard is under the jurisdiction of the National Furniture Machinery Standardization Center. This standard was drafted by Mudanjiang Second Light Industry Machinery Factory. The main drafters of this standard are Wang Shisen, Zhang Weihong, 53
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.