title>Dangerous goods - Test method of cap for extremely insensitive detonate substance(EIDS) - GB/T 21575-2008 - Chinese standardNet - bzxz.net
Home > GB > Dangerous goods - Test method of cap for extremely insensitive detonate substance(EIDS)
Dangerous goods - Test method of cap for extremely insensitive detonate substance(EIDS)

Basic Information

Standard ID: GB/T 21575-2008

Standard Name:Dangerous goods - Test method of cap for extremely insensitive detonate substance(EIDS)

Chinese Name: 危险品 极不敏感引爆物质的雷管试验方法

Standard category:National Standard (GB)

state:in force

Date of Release2008-04-01

Date of Implementation:2008-09-01

standard classification number

Standard ICS number:Environmental protection, health care and safety >> 13.300 Dangerous goods protection

Standard Classification Number:Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive

associated standards

Procurement status:NEQ ST/SG/AC.10/1

Publication information

publishing house:China Standards Press

ISBN:155066·1-32707

Plan number:20068199-T-469

Publication date:2008-08-01

other information

Release date:2008-04-01

drafter:Wang Libing, Li Ningtao, Yu Zhirui, Yu Yanjun, Wang Xiaobing, Xu Chuanlai

Drafting unit:Tianjin Institute of Inspection and Quarantine, Sinochem Chemical Standardization Institute, Jiangnan University, etc.

Focal point unit:National Technical Committee on Hazardous Chemicals Management Standardization

Proposing unit:National Technical Committee on Hazardous Chemicals Management Standardization

Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of China

competent authority:National Standardization Administration

Introduction to standards:

This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods. This standard does not apply to the test of the dangerousness of the following goods: - Dangers of military explosives; - Dangers of explosives in the production process; - Dangers of unpackaged explosives in transportation; - Dangers caused by the influence of static electricity or electromagnetic fields; - Dangers caused by improper operation or illegal operation; - Other special hazards under abnormal transportation conditions. GB/T 21575-2008 Test method for detonators of extremely insensitive detonating substances for dangerous goods GB/T21575-2008 Standard download decompression password: www.bzxz.net
This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods. This standard is not applicable to the test of the following goods' hazards: ———hazards of military explosives; ———hazards of explosives in the production process; ———hazards of unpackaged explosives in transportation; ———hazards caused by the influence of static electricity or electromagnetic fields; ———hazards caused by improper operation or illegal operation; ———special hazards under other abnormal transportation conditions.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Test and Criteria Manual", and the degree of consistency is not equivalent. Its relevant technical content is completely consistent with the above manuals, and the standard text
format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for the Management of Dangerous Chemicals Standardization (SAC/TC251).
The responsible drafting unit of this standard is Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting units of this standard are Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard are Wang Libing, Li Ningtao, Yu Zhirui, Yu Yanjun, Wang Xiaobing, Xu Chuanlai.
This standard is published for the first time.

The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB8031-20050 -10.47978 Industrial electric detonator
GB/T11253-2007 Carbon structural steel cold-rolled thin steel plate and steel strip (ISO4997:1999, NEQ)
United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations"
United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria"

Some standard content:

IC8 13.300
National Standard of the People's Republic of China
G8/T215752008
Dangerous Goods
Extremely Insensitive Detonating Substances
Test Method for Detonators
Dangernus goons--Test method or cap for extremely insensitive detonating substances (ElDs)2008-04-31 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China National Standardization Administration
2008-09-01 Implementation
B/21575--2008
The corresponding sub-unit of the United Nations is the United Nations' ten pets. The health facilities of the car bottle and the United Nations are the United Nations' annual awards for the delivery of dangerous goods. The inspection and service standards are based on your needs. The heat of the hundred is non-equivalent. In fact, the United States has the most complete teaching of the technology, and the most difficult to issue this standard is in accordance with GB/T1.12C. This standard is the first to be issued.
m滋
0/1 21575--2008
Test method for detonators of extremely insensitive detonating substances
1! This standard deals with the test methods and test methods for the classification and grading of explosives in dangerous goods. 1.2 This standard does not apply to the dangerous goods described in the whole process and test report. "In the production process, you must test the dangerous goods without packaging for explosives. The risks caused by the shock of the explosives in the equipment, the risks caused by the flashover, and the risks caused by the operation without selecting the special chapter. 2 Normative references The following documents are arranged in the standard (not including explosives). The latest version of this standard is used. RO31
Industry follow
#o? Magnetic rope edge
Most suitable
Education cargo transportation and marketing:
United Nations related ten dangerous goods transportation
3 water language and extension
United Nations national open China United Logistics Box
Strictly share the terms and
of the load
There are not applicable to this standard
Cold rolled steel plate and steel cladding (1S
Emulsion is the selected Japanese intention to open the sample, the true and then all drums according to this standard based on the cooperation of all parties to study the latest Version applicable to this standard,
:1959,E0)
Recommendations for the transport of dangerous goods
In extreme fashion, the explosive energy is generated by the group, and a large amount of gas is produced, and the chemical and chemical changes of the composition are used to produce the instantaneous phenomenon: bzxz.net
Explosive substances
refer to solid substances (foods that can produce gas by their own chemical reactions and can be used to avoid the environment at high speed). Smoke is large, even if they do not emit radiation. Think of it, 3. 3
Explosive articles expasise srtules
Refers to articles containing multiple explosive substances 4 Equipment and materials
4.1 Detonation tube
Electrical energy tube (8 80312005)8 Competitive tube
4.2 Selection of products
Inner diameter 80m, length 1 micron not more than, 5mm GB/T 21575---2008
4.3 Verification machine
Connect the steel plate (/11253-200?235-. My is 160mm curtain 1mm4.4 wheat rack
avoid steel complex, use point mr wall thickness m
4.5 bottom sea
length, width not less than 15amm thickness 25m:
4.6. Sincere inspection and installation free Figure 1)
original shape can tube
1. Test end sensitivity test
5. Test ticket
5. Put the sample into the sample tube at the bottom of the tube, and require its density to be as close as possible. When loading, pay attention to the shape of the sample molecules. Each time you load it, let the molecules swim down from a high place so that the test group can fill it up:
center) The cavity sample should be carefully filled to avoid gaps: Zhou Yiyan! Do not make the sample of the sealed package, money Meng medicine, such as medicine is too long, the drug dealers of many products need to insert double cut sample 0) the sensitivity of the opponent and the camera have beautiful samples, in the sincere test town Bi Le in 2 full 30 degree of beauty under the protection of sample #30:) for the concept of the meal of ammonium, such as the high temperature area of ​​the environment should be transported in the home before the test! The following is the cycle. 5r25325.
5.? Put the pipe on the selected certificate board with the bracket, and then use the bottom plate 1 to tighten the pipe from the explosion quality department to the central shock, and insert it to the full depth. Hui... a full effect of the top to Xin good, lazy climbing to avoid teaching, 5.3 Bin Jun to carry out 3
5. Say the result of the nest description
08723675m-2005
The result appears in the test version to let me observe the shape of his education through both the same teaching certificate city line test board The heart is short, the violent mark appears in the bay title and does not choose the tailor-made carrying back business test results Cui withdraws the way for "select Na as", "heart Bin test report
test Jun interpretation use name, number, film, specification,
enterprise name:
test equipment new
test verification board material flower phenomenon
test results record, recognize and observe the innovation in the test, why there is any explanation for the test results of the test number phenomenon in the test phase II, test person signing, test Jun single image meaning. You are a dangerous product technology insensitive explosive material surface pipe Bin test determination method step result example dance management table 1 dangerous test dark extremely insensitive explosive material pipe the test shrink soft real love || tt || not according to the amount of steam with cat investment / hold the dynamic tide) said the device ring drop methyl sure I live energy number (20) Ya Huanbo military steam four bottles coach Youde mixture 4, Lincheng 1 Xiongfeng Korean medicine / ladder think cotton (60: 401. Yan || tt || Sanxia base three sure base installation: three religions end polymer (S5) point system G8/1 21575-2008
Chinese Academy of Sciences
Family Standard
Dangerous grade non-explosive substances
Control test method
GnTa13200G
Yu bacteria secret thick Luo foundation waist signature line
Beijing system office three Hebei business 16 college
All equipment chicken:
Website ww.pea,cn
:23823846685108
China approved teaching society printing Guangyin period
All effects Xinhua book Da distribution
That year x231 namely Zhang 0.Yu number 5 stem etc.
Card code: 15502-3183: Price 10.00 Yuandian Headquarters Distribution Center dispatched assistance
There is a printing and binding mirror
Copyright special calculation slow teaching feeling research
Report phone: (Q10168533533
8002--91912 1/$0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.