Offset gloss ink
Basic Information
Standard ID:
QB/T 3598-1999
Standard Name:Offset gloss ink
Chinese Name:
胶印亮光油墨
Standard category:Light Industry Standard (QB)
state:Abolished
Date of Release1999-04-21
Date of Implementation:1999-04-21
Date of Expiration:2013-06-01
standard classification number
Standard Classification Number:General>>Economy, Culture>>A17 Printing Technology
Publication information
publishing house:China Light Industry Press
Publication date:1999-04-21
other information
drafter:Jin Zhiwu, Fang Anguo
Drafting unit:Shanghai Ink Factory, Tianjin Ink Factory, Hangzhou Ink Factory
Focal point unit:National Ink Standardization Technical Committee
Proposing unit:Industry Management Department of State Administration of Light Industry
Publishing department:State Bureau of Light Industry
Introduction to standards:
This standard applies to offset glossy ink. Offset glossy ink is a colloid made by mixing and grinding synthetic resin, drying vegetable oil, high-boiling alkane oil, high-quality pigment and additives. It is used for single-color and double-color offset printing presses to print albums, pictures and other high-end exquisite printed materials on coated paper. QB/T 3598-1999 Offset glossy ink QB/T3598-1999 standard download decompression password: www.bzxz.net
This standard applies to offset glossy ink. Offset glossy ink is a colloid made by mixing and grinding synthetic resin, drying vegetable oil, high-boiling alkane oil, high-quality pigment and additives. It is used for single-color and double-color offset printing presses to print albums, pictures and other high-end exquisite printed materials on coated paper.
Some standard content:
QB/T 3598--1999
This standard is the original professional standard ZB/TA17004-1987 Offset Glossy Ink, which was converted to QB/T3598-1999 through the publication of the National Light Industry Bureau Document No. [19997112], and the content remains unchanged. This standard is proposed by the Industry Management Department of the State Bureau of Light Industry. This standard is under the jurisdiction of the National Ink Standardization Technical Committee. This standard was drafted by Shanghai Ink Factory, Tianjin Ink Factory, and Hangzhou Ink Factory. The main drafters of this standard are Jin Zhiwu and Fang Anguo. From the date of implementation, this standard will replace the light industry professional standard ZB/TA17004-1987 "Offset Glossy Ink" issued by the former Ministry of Light Industry.
Light Industry Standard of the People's Republic of China
Offset gloss ink
Offset gloss ink
QB/T3598—1999
Replaces ZB/TA17004--1987
This standard applies to offset gloss ink. Offset gloss ink is a colloid made by mixing and grinding synthetic resin, drying vegetable oil, high-boiling point alkane oil, high-quality pigments and additives. It is used for single-color, double-color, single-sheet offset printing machines to print high-end exquisite printed materials such as albums and pictures on coated paper.
1 Varieties and specifications
1.1 The product colors are divided into six colors: white, yellow, green, blue, red, and black, with a total of 16 colors. 2 Technical requirements
The products of this standard must meet the technical indicators in Table 1. Table 1
Quantity indicators
Pol 111 | | tt | | P01212 | tt||P01633||tt| |P01644
PO1655
P01656
P01808
Product Name
Lemon Yellow Ink
Medium Yellow Ink
Transparent Medium Yellow Ink
Dark Yellow Ink
Peacock Blue Ink
Sky Blue Ink
Medium Blue Ink
Dark Blue Ink
Golden Red Ink||t t||Red ink
Deep red ink
Pink ink
Magenta ink
Coloring power/
90~~110
Fineness/
Flowability/bzxz.net
27~37
25~~35
26~36
25~35
25~~35
30~ ~40
10~16
8~14
8~14
8~14
8~14
Gloss/
Fixing speed
Note 233 medium yellow ink; 234 transparent medium yellow ink: 422 sky blue ink; 412 peacock blue ink; 655 pink ink; 656 magenta ink; 808 black ink can be used for four-color printing.
Approved by the State Bureau of Light Industry on April 21, 1999
Implemented on April 21, 1999
3 Test method
QB/T3598—1999
3.1 Color shall be in accordance with the provisions of the original QB557--1983 "Ink Color Test Method". 3.2 The coloring strength shall be in accordance with the original QB558-1983 "Test Method for Coloring Strength of Ink". 3.3 The fineness shall be in accordance with the original QB559-1983 "Test Method for Fineness of Ink". 3.4 The fluidity shall be in accordance with the original QB560-1983 "Test Method for Fluidity of Ink". 3.5 The viscosity shall be in accordance with the original QB564-1983 "Test Method for Viscosity of Ink". 3.6 The gloss shall be in accordance with the original QB573-1983 "Test Method for Gloss of Ink". 3.7 The fixing speed shall be in accordance with the original QB570-1983 "Test Method for Fixing Speed of Ink". 4 Inspection Rules
4.1 The inspection department of the manufacturer shall be responsible for the inspection before the product leaves the factory, and it shall not leave the factory until it meets the technical indicators. Each batch of products shall be accompanied by the model, product name, batch number, net weight and production date. 4.2 During the acceptance process, the receiving unit shall conduct all or part of the inspections according to the technical indicators listed in this standard, and the inspection personnel shall conduct sampling at a ratio of 5% to 10% according to the batch size, and the sampling volume of each can (box) and barrel shall not be less than 20g. 4.3 When sampling, the dust and debris on the ink can (box) and barrel cover shall be carefully removed to prevent foreign debris from falling into the ink sample. 4.4 If it is found that the technical indicators are not met during the acceptance, the sample shall be re-sampled and re-tested. If the re-test results still do not meet the standard requirements, the manufacturer and the acceptance unit shall jointly negotiate to solve the problem. 5 Marking, packaging, transportation, storage
5.1 Offset glossy ink is packed in iron cans (boxes) or iron barrels. The iron cans (boxes) should be packed in outer packaging boxes. 5.2 The iron cans (boxes) or iron barrels should be labeled with the manufacturer name, model, product name, net weight, production batch number and packaging date. 5.3 The outer packaging surface should have the manufacturer's name, model, product name, quantity, weight and a mark that it should not be inverted. 5.4 The product should not be stored in the open air. The warehouse must be dry and ventilated. Prevent moisture and stay away from fire. 5.5 During transportation and handling, it is not allowed to be thrown, dropped or bumped to prevent the packaging from being damaged and ink from spilling. 5.6 This product can be transported by various means of transportation such as cars, ships, and airplanes. 5.7 Under the conditions of 5.4, the effective storage period of this product is two years from the date of production. 5.8 During the effective storage period, individual quality indicators of this product are allowed to change, but the manufacturer must ensure its use. 752
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.