This standard specifies the technical conditions for liquid fertilizer packaging, including packaging requirements, packaging test items and indicators, packaging dimensions, packaging sampling, test methods, storage and transportation, etc. This standard applies to liquid fertilizers. When liquid anhydrous ammonia is used as a fertilizer, its packaging should comply with the corresponding product standards. NY/T 1108-2006 Technical requirements for liquid fertilizer packaging NY/T1108-2006 Standard download decompression password: www.bzxz.net
This standard specifies the technical conditions for liquid fertilizer packaging, including packaging requirements, packaging test items and indicators, packaging dimensions, packaging sampling, test methods, storage and transportation, etc. This standard applies to liquid fertilizers. When liquid anhydrous ammonia is used as a fertilizer, its packaging should comply with the corresponding product standards.
Some standard content:
ICS65.080 Agricultural Industry Standard of the People's Republic of China NY/T1108—2006 Liquid fertilizers package technical conditions Liquid fertilizers package technical conditions2006-07-10 Issued 2006-10-01 Implementation Ministry of Agriculture of the People's Republic of China This standard is proposed and managed by the Ministry of Agriculture of the People's Republic of China. NY/T1108—2006 The drafting units of this standard are: National Fertilizer Quality Supervision and Inspection Center (Beijing), National Agricultural Technology Extension Service Center. The main drafters of this standard are: Feng Zhaohui, Cao Weidong, Liu Hongfang, Bao Wankui, Wang Xu. 1 1Scope Technical requirements for liquid fertilizer packaging NY/T1108-2006 This standard specifies the technical conditions for liquid fertilizer packaging, including packaging requirements, packaging test items and indicators, packaging size, packaging sampling, test methods, storage and transportation, etc. This standard applies to liquid fertilizers. When liquid anhydrous ammonia is used as fertilizer, its packaging should comply with the corresponding product standards. 2Normative references The clauses in the following documents become clauses of this standard through reference in this standard. For all dated references, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, parties to an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated references, the latest versions shall apply to this standard. GB/T2828 Batch inspection counting sampling procedures and sampling tables (applicable to inspection of continuous batches) GB/T4857.3 Static load stacking test method for packaging and transport packages GB/T4857.5 Drop test method for packaging and transport packages GB/T4892 Dimension series for rigid rectangular transport packages GB/T13201 GB/T13757 GB/T15233 GB/T15239 GB/T16716 GB/T17344www.bzxz.net Dimension series for cylindrical transport packages Dimension series for bag transport packages Unit cargo dimensions Isolated batch counting sampling inspection procedures and sampling tables General rules for the treatment and utilization of packaging waste Packaging packaging containers Airtightness test method GB/T 18006.2 3 Terms and definitions Test method for degradation performance of disposable degradable tableware The following terms and definitions apply to this standard. 3.1 Reduce reduce On the premise of ensuring the functions of containing, protecting, transporting, storing and selling, the first consideration for packaging is to minimize the total amount of packaging materials used. Reuse Reuse the used packaging materials after certain treatment. 3.3 Recycle Recycle the discarded packaging products and convert the waste into new substances or energy after certain treatment. 3.4 degradable Under certain conditions, the chemical structure and physical and mechanical properties of discarded packaging materials may change significantly, such as molecular weight reduction, physical and mechanical properties decline, or decompose into carbon dioxide and water. 1 NY/T1108—2006 4 Requirements 4.1 General 4.1.1 Liquid fertilizer packaging should have the safety of protecting the environment and life safety: the economy of rationally utilizing resources and reducing energy consumption: and the waste can be treated and reused 4.1.2 The volume and mass of the packaging should be limited to the minimum level, and the packaging should be reduced. 4.1.3 The packaging materials should ensure that the fertilizer is not damaged during normal storage and transportation, and meet the requirements of the corresponding packaging material standards. 4.1.4 When the technical conditions permit and are consistent with the relevant provisions of fertilizers, reusable packaging should be selected; if it cannot be reused, the packaging materials should be recyclable; if it cannot be recycled, the packaging waste should be degradable. 4.1.5 Recyclable and degradable packaging should indicate "recyclable" or "degradable" in the packaging label. 4.1.6 Requirements for plastic products: The packaging materials used should be reusable, recyclable or degradable. Under the premise of protecting the contents intact, try to use materials of a single material. The polystyrene resin or molded products used should meet the requirements of the corresponding national standards. 4.1.7 For reusable or recyclable packaging, the treatment and utilization of its waste shall be carried out in accordance with the provisions of GB/T16716. 4.2 Transport packaging 4.2.1 The test items and indicators of liquid fertilizer transport packaging are shown in Table 1. Table 1 Test items Stacking (general packaging, 24h plastic packaging barrel, 40℃, 28d ), m drop, m 4.2.2 The transportation packaging materials of liquid fertilizers should be strong and durable to ensure that the contents are not damaged. The packaging materials that can be used are: natural materials, metals, synthetic materials, composite materials, corrugated cardboard with moisture-proof layer, corrugated calcium plastic board and other packaging materials agreed by the transportation department and users. 4.3 Sales packaging 4.3.1 The test items and indicators of liquid fertilizer sales packaging are shown in Table 2. Table 2 Test items Airtightness (5min), kPa 4.3.2 Minimum packaging limit. Expressed in volume units, bagged products should not be less than 25mL, and bottled products should not be less than 100mL. 4.3.3 The sales packaging materials of liquid fertilizers should be strong and durable, and should not have any contact with the fertilizer. The product will not be damaged by physical and chemical effects, will not swell, leak, or affect product quality. Available packaging materials include: glass, plastic, metal, composite materials, etc. 4.3.4 The packaging container of bottled liquid fertilizer must be equipped with a suitable inner plug and outer cover or an outer cover with a gasket, and should not leak when inverted. The barrel cover of barreled liquid fertilizer must have a gasket to avoid leakage. 5 Packaging size 5.1 The size of the transport package shall comply with the provisions of GB/T4892, GB/T13201GB/T13757. 5.2 The packaging unit shall comply with the provisions of GB/T15233. 6 Sampling Sampling shall be carried out according to the inspection methods specified in the packaging materials and related products. In general production, it shall be implemented in accordance with GB/T2828; product certification 2 or Supervision and random inspection shall be carried out in accordance with GB/T15239: appraisal inspection and arbitration inspection shall be carried out in accordance with GB/T15239. 7 Test methods The stacking test method shall comply with the provisions of GB/T4857.3. 7.2 The drop test method shall comply with the provisions of GB/T4857.5. 7.3 The airtightness test method shall comply with the provisions of GB/T17344. 7.4 For degradable materials, refer to GB/T18006.2 for inspection. 8 Storage and transportation NY/T1108—2006 The storage environment of liquid fertilizer packaging must be clean and hygienic. Appropriate storage technology and methods should be selected according to product characteristics, storage principles and requirements; the storage method cannot cause changes in liquid fertilizers and cannot cause pollution. Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.