JB/T 9830-1999 Technical specification format for agricultural tractor manual
Some standard content:
TC5 65.060.10
Machinery Industry Standard of the People's Republic of China
JB/r9830-1999
Tractors for agriculture
Specifications pattcrn for operator's manuals1999-08-06Promulgated
State Administration of Machinery Industry
Implementation on 2000-01-01
JB/T9830-1999
This standard is a revision of ZHF16U00?.1-007.3-90 "Technical Specification Format for Agricultural Tractor Instructions". During the revision, two standards of the original specifications were combined into one standard, and corresponding changes were made in the compilation, but the main technical contents did not change. This standard replaces ZB/TTG0007.1~007.3-90 from the date of implementation. This standard is proposed and approved by the National Technical Committee for Tractor Standardization. The originating unit of this standard is Luoyang Tractor Vision Research Institute, and the main initiator of this standard is Shang Xiangsheng.
1 Scope
Machinery Industry Standard of the People's Republic of China
Agricultural tractors
Technical specification format for operator's manual
Traclors for agriculture
-Specifications pattern for operator's mannalsThis standard specifies the technical specification format and filling method for operator's manual of agricultural tractors. IR.T 930—1999
Replacement 23 60 0071-007.3-90
This standard is applicable to the writing of technical specifications for operator's manual of agricultural tractors (hereinafter referred to as tractors). It shall be used as a reference for agricultural tractors, forestry push-pull machines and industrial tractors.
2 Reference standards
The following provisions are included in the standard: Provisions that are not used in this standard or are not included in the standard shall be effective when this standard is published. All standards will be revised. Parties using non-standards should discuss the possibility of using the latest versions of the following standards. JBT9831-1999 Agricultural Tractor Number Reduction Rules 3 Technical Specifications
The technical specifications of the tractor manual indicate the structure and performance of the tractor and major components. The technical specifications are as follows. When writing, they can be added based on their structure.
3.1 Complete Machine
3.1. The brand and model of the tractor shall be filled in according to [/T983] and shall be consistent with the approval card of the other number. 3.1.2 Type and main purpose
For wheeled tractors, such as two-wheel weak-motion, west-wheel drive, extension and transfer types: single-type, two-wheel method or some types. Soil use is calculated for one purpose, universal cattle plowing, high-altitude film tillage, water, slope, fruit reading, art, transportation, bow drive, wet running and other purposes,
3.1.3 Rated rate of gravity, kN
3.1.4 Dynamic vehicle recording rate, kw:
3.ls External dimensions, mmxmmxmm: calculated length x × height 3.1.6 Wheel (pastoral! cm, mm. Calculate the range of the minimum wheelbase to the maximum wheelbase of the front and rear wheels respectively. 3.1. Wheelbase or belt contact length, mm
3.1.8 Minimum ground clearance and agricultural space, mm
31.9 Minimum inner radius of rotation, m, calculated separately when using unilateral dynamic without unilateral braking , average value of the radius of rotation,
Approved by the State Machinery Industry Bureau on August 6, 1999, and implemented on January 1, 2000
ID/T9830-1999
3.1.10 Theoretical speed of each pin, km/h. The theoretical speed of each pin forward and backward when the engine is calibrated to the rotation speed! Including annual electric speed].
3.1.1 Mass. Calculate the mass of the station structure, the minimum mass used, the mass distribution of the front and rear wheels, and the mass of the front and rear counterweights. 3.2 Engine
3.2.1 Engine brand, number.
3.2.z Number of cylinders: cylinder diameter, a; stroke, mm; total displacement, [3. 2.3 Rated speed, rmin: Rated power, kW.3.2.4 Maximum speed, N·m and corresponding speed, minl, .2.53
Fuel consumption rate, gr(kw·h)
Engine oil consumption rate, official (W)
Injection record. Calculation column cancer type or distribution type, etc.: Open, number, 3.2. 7
Speed regulator. Calculate centrifugal or pneumatic: full range or dual mode, etc. 3.2.8
Injector. Calculate hole type and shaft type: model and injection pressure, MP. Engine. Calculate rotary or gear type; speed, rmin: flow, Limi diesel filter. Make cotton rope, felt or paper, porous plastic filter, etc.: model, engine filter. Calculate centrifugal or paper, etc., model. Air filter. Calculate cyclone, oil bath or paper, etc.: model. Lingque water pump, calculate speed, umin; flow, L/min3.2.14
Energy saving standard, enter model, and start humidification, 3. 2. 15
Cooling type. Including water-cooled evaporative type, water-cooled or air-cooled type, etc. 3.2.16
Lubrication method. Including flying or, pressure type or compound type, etc. 3.3.17
Starting method. Including downward starting, electric starting, gas starter starting, etc.; starting preheating or B-type auxiliary power device, etc. 3.2.18F
3.3 Special power system
3.3.1 Engine and transmission system connection type, including direct drive or manual drive, etc. 3.3.2 Clutch. Including dry type or hybrid; single-plate, double-plate or double-plate; single-acting clutch, double-acting clutch or double clutch: normally engaged or non-engaged, etc.
Note: When the ionizer and the station stop are separated, the 3.3.3 transformer box shall be listed separately. Count the number of gears for main and secondary transmissions and forward and reverse transmissions: straight or gear type, travel gear type: power gear shifting, combination gear shifting or synchronizer shifting, partial power shifting, full power shifting, etc. 3.3.4 Central transmission. 1 Count column gear type, straight inner wheel type, screw gear type chain transmission type, etc.: 3.3.5 Differential. Count ordinary type or moon chain type, toothed type, gear type or hydraulic friction plate type differential lock, etc. 3.3.6 Final transmission, count single-stage and double-stage; internal or external type: hanging gear type, gear type or travel internal excavation type, etc. 3.3.7 Front pseudo-drive axle. Count intermediate or rigid transmission auxiliary: intermediate transmission, differential, final transmission type. 3.4 Travel system
3.4.! Wheeled tractor
3.4.1.1 Frame, including frameless type, semi-rigid type or full-wing type, etc. 3.4.1.2 Front frame. Include elastic frame or rigid frame, etc. 2bZxz.net
JB/T9830—1999
3, 4.1.3 Front tractor, including retractable or fixed type: sleeve or plate type, etc. 1.4.1.4 Tire. Include the specifications of the front and rear tires, grade, number of plies, number of tires, and air pressure, kPa respectively: 3.4.2 Belt tractor
3.4.2.1 Frame. Include rigid frame: semi-rigid frame, elastic frame, etc. 3.4.2.2 Drive. Include integral or support type; single row or double row; joint coupling or joint gear coupling, etc. 3.4.2.3 Temperate zone. Including integral pin-jointed, integral tooth-jointed or combined crawler tracks, rubber-coated carbon belts or rubber-coated belts, etc. 3.4.2.4 Support wheels and supporting wheels. Counting number 3.4.2.5 Tensioning wheels and tensioning buffer devices: including sliding type and dynamic type, 3.4.3 Walking tractor
Counting specifications of dynamic wheels and regular wheels, tire tread and air volume, kPa. 3.5 Steering system
3.5.1 Wheel changer
3.51. Steering method. Front wheel swivel, folding swivel, four-wheel swivel, etc. 3.5.1.2 Steering gear. Mechanical type, hydraulic power steering type or hydrostatic steering type: screw-type, spherical scorpion lever type, spherical ball type, crank type, etc.
3.5.2 Belt conveyor
3.5.2.1 Steering gear, wet-ratio or multi-disc clutch type, linear gear type or double differential type 3.2.2 Operating methods: mechanical, hydraulic or pressure type, etc. 3.6 Braking system
3.6.1 Service brakes: dry, wet: lung, disc or belt: mechanical, foot-assisted or pressure type, etc. 3.2 Parking brake: key pedal, independent or manual, etc. 3.6.3 Braking system: mechanical, pneumatic or hydraulic brake, etc. 3.7.1 Hydraulic system. Open or closed center and safety adjustment pressure, MPm3.7.2 Hydraulic pump. Gear system, type and flow plate, L/Ritc3.7.3 Distributor. Travel valve, rotary valve, chain valve, etc.3.7.4 Cylinder, diameter × piston, mn × mn: single-acting or double-acting, 3.7.5 Hydraulic mechanism. Front suspension, rear rescue or auxiliary control, two-point or one-point suspension type or connection size and type of suspension device.
3.7.6 Depth adjustment method, including floating control, square control, manual control or force integrated control, etc.: upper pull or lower rod sensor, etc.3.1 Maximum lifting force, kN, maximum lifting force at 610mm behind the model suspension point, 3.7.8 Hydraulic output connector. Counting front or rear type: diameter view, logarithm, and force, MPa: flow to, Lmin, 3.8 Moving knife output shaft
Counting front type, rear type or shaft arrangement type: independent type, semi-independent type or non-independent type: speed, mi (relative engine rotation, r/mn]; same length speed, m: shaft head type, etc. 3.9 Number of force wheel H pulley
Counting pulley width, mm and speed, ms-|| tt||3.10 Traction device
JB/T9830-1999
3.10 Traction device. Including fixed type, lifting rod type; height of traction rod, mm: category. For tractor, the size of the traction machine is: mm, the height of the lower support surface, mm3.10.7, towing device, including (type of hook forming, etc.). 3.11 Tractor three-frame ||tt| | The passenger compartment has adjustable or fixed type or horizontal. 3.12 Cab
Simple type, with a radiator or air conditioning device, etc. 3.13 Safety frame
Passenger compartment or four-hook type, etc.
3.14 Driver's seat
Passenger compartment, type of airbag: seat structure and adjustment type, etc. 3.15 Electrical instruments
3.15.1 Grounding type, positive pole iron or negative pole 3.15.2 Generator, model: voltage, V: power, W, 3.15.3 Regulator, model and voltage, V. 3.15.4 Starting motor, model: voltage, V: power, W, 3.15.5 Battery. Model; voltage, V; capacity, A·h: number 3.15.6 Lighting signal device. Name, number 3.15.7 Monitoring warning device. Name, 3. 16 Quantity
3.16.! Stirring oil. Counted in brand: quality kg3.16.2 Cooling (water) Counted in kg=
3.16.3 Engine lubricating oil. Counted in brand: quality kg3.16.4 Lubricating oil for transmission box. Counted in brand: quality k name. 3.16.5 Lubricating oil for final drive: Counted in brand: quality kg. 3.16.6 Lubricating oil for front drive correction: Counted in brand: quality kg. 3.16.7 Liquid suspension oil. Counted in brand; pad kg: 3.16.8 Transmission or liquid stop and turn, Counted in brand: quality k
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.