JB/T 5153.1-1991 Plate and frame pressure oil filter types and basic parameters
Basic Information
Standard ID:
JB/T 5153.1-1991
Standard Name: Plate and frame pressure oil filter types and basic parameters
Chinese Name:
板框式加压滤油机 型式与基本参数
Standard category:Machinery Industry Standard (JB)
state:Abolished
Date of Release1991-07-22
Date of Implementation:1992-07-01
Date of Expiration:2006-10-01
standard classification number
Standard Classification Number:Machinery>>General Machinery and Equipment>>J77 Separation Machinery
Publication information
other information
Introduction to standards:
JB/T 5153.1-1991 Plate and frame pressure oil filter type and basic parameters JB/T5153.1-1991 standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
JB/T5153.1~5153.2-91
Plate and frame pressure oil filter
1991-07-22: Issued
Issued by the Ministry of Machinery and Electronics Industry of the People's Republic of China
1992-07-01Implementation
JB/T5153.1—91
Plate and frame pressure oil filter
JB/ T5153.2—91
1 Plate and frame pressure oil filter
Type and basic parameters
Technical conditions
c00500000000
Mechanical industry standard of the People's Republic of China
Plate and frame pressure oil filter
Type and basic parameters
Subject content and scope of application
This standard specifies the type and basic parameters of plate and frame pressure oil filter. This standard applies to plate and frame pressure oil filter (hereinafter referred to as "oil filter") for filtering transformer oil. 2 Reference standards
GB7780
Filter model compilation method
Type and basic parameters
Chamber filter press and plate and frame filter press
JB/T5152
Type and basic parameters
3.1 Structural type
The structural type diagram of the oil filter is as follows:
Pressure plate
3.2 Basic parameters
Motor
The basic parameters of the oil filter should comply with the relevant provisions of JB/T5152. The parameters are shown in Table 1. Approved by the Ministry of Machinery and Electronics Industry on July 22, 1991, JB/T5153.191
Thrust plate
Implemented on July 1, 1992
Plate size 1
The first series
(plate outer dimensions)bzxZ.net
The second series
(plate inner dimensions)
JB/T5153.191
Filter area
Note: 1) The first series of parameters should be used when developing new products and renovating old products. The model indication method
The oil filter model indication method starts from the provisions of GB7760, 2
Filter pressure
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.