GB 16689-1996 Regional flag of the Hong Kong Special Administrative Region
Some standard content:
GB16689-1996 | The relevant provisions in "Instructions" have compiled a standard Appendix A "Instructions on the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China".
2. This standard is based on the annex of the "Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the People's Republic of China" adopted at the Fourth Plenary Session of the Preparatory Committee of the Hong Kong Special Administrative Region of the National People's Congress on August 10, 1996. 1 The "Instructions for the Production of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China" formulates the technical requirements for the shape, pattern, standard size, plate making and positioning of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China, and regards this document as Appendix B of the standard. 3. In this standard, some important technical parameters such as the red chromaticity value and color difference of the flag of the Hong Kong Special Administrative Region, the dye fastness of the regional flag made of various fabrics, the standard size and allowable error, and the evaluation of the appearance of the flag refer to GB12982. Corresponding indicators in 1996 "Flag". In addition, this standard also adds some technical content requirements based on the regional characteristics and the current development status and use requirements of the domestic flag making industry (such as: confirmation of the Y1 value of the white bauhinia petals in the pattern of the Hong Kong Special Administrative Region flag, flag sewing wait). Appendix A, Appendix B and Appendix C of this standard are appendices to the standard. This standard is proposed by the Hong Kong and Macao Affairs Office of the State Council. This standard is under the jurisdiction of the Standardization Department of the State Administration of Technical Supervision. The unit responsible for drafting this standard: National Color Standardization Technical Committee. The main drafters of this standard: Sun Xiuru, Qi Yamin, Han Yue, Zheng Zhijian, Zheng Banglin, Zou Wei, Zhang Jiaying, Wu Xiaoqin. 1 Scope
National Standard of the People's Republic of China
Regional flag of Hong Kong Special Administrative Region
Regional flag of Hong Kong special administrative reglonGB16689—1996
This standard specifies the Hong Kong flag of the People's Republic of China Appearance quality (shape, flag pattern, plate-making positioning, standard size, flag color), dyeing fastness, regional flag sewing, flag evaluation, test methods, inspection rules, Technical requirements for packaging and marking.
This standard applies to regional flags made of cotton, silk, chemical fiber fabrics (excluding man-made fiber fabrics), and also applies to regional flags made of wool and linen fabrics. The appearance quality control of regional flags made of paper, plastic and other materials should also refer to this standard. 2 Referenced standards
The provisions contained in the following standards constitute provisions of this standard by being quoted in this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision and parties using this standard should explore the possibility of using the latest version of the standard listed below. GB250-1995 Gray sample card for evaluating discoloration GB/T3921-1996 Test method for color fastness to washing of textiles GB/T3979--1987 Test method for color fastness of textiles to light Xenon arc GB/T8427-1987||tt ||GB/T84301987 Test method for color fastness of textiles to weathering Xenon arc GB12983-1991 National Flag Color Standard Sample 3 Definition
This standard adopts the following definitions.
3.1 The regional flag of the Hong Kong Special Administrative Region
refers to the red flag of the bauhinia flower that represents the five-star flower of the Hong Kong Special Administrative Region established by the People's Republic of China.
3.2 Bauhinia petal white refers to the white color with specific reflectance of the redbud petals on the regional flag. 4 Requirements
4.1 The shape and pattern of the regional flag
The shape and pattern of the regional flag shall be in accordance with the relevant provisions in the "Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China" and "Instructions on the Pattern of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China" implement. See Appendix A (Appendix of the Standard) and Figure 1. 4.2 Standard size, plate-making positioning and allowable error of the regional flag 4.2.1 Standard size and plate-making positioning of the regional flag shall be implemented in accordance with the relevant provisions of the "Instructions for the Production of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China" . See Appendix B (Standard Appendix) and Appendix C (Standard Appendix). 4.2.2 The standard dimensions and allowable errors of regional flags are shown in Table 1 and Figure 2. State Bureau of Technical Supervision approved the implementation on 1997-02-01 on 1996-12-25
Flag
Specifications
Length
mm
High||tt ||mm
Bauhinia flower circumscribed circle diameter
mm
Pentagram circumscribed circle diameter
mm
stamen width
mm|| tt||Diameter of the small center circle
mm
Distance from the center point of the purple flower to the flag
The distance between the upper and lower edges
mm
The center point of the bauhinia flower To the flag
The distance between the left and right sides
mm
The width of the flagpole cover
mm
The latitude and slant of the flag<
mm|| tt||Bauhinia petal positioning angle
GB16689-1996
Figure 1 Pattern table of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China 1
No. 1
No. 2||tt ||Regional Flag Standard Size and Allowable Tolerance
No. 3
No. 4
1920+201440+18
2880+30
2400+24
1600+161280+13
1920+20
1152±40
101±4
5±1
30±| |tt||960±20
960±35
84±3.5
4±1
25
800±20
1440±301200±30
80~85
30
70~75
24
768±30
67±3| |tt||3.5±1
No. 20
640±15
960±20
60~65
20
14 °±2°
960+12
576±25
50±2.5
3±1
15
480±10
720±15
50~55
20
No. 5
960+15
640+10
384±20
34±2
2±1
10
320±10
480±10
40~45| |tt||15
Car flag
300+6
200+4
120±5
11±1
0.5 ±0.3
3±1
100±2
150±3
15~25
signature flag
210+4| |tt||140+3
84±3
7±1
0.5±0.3
2±1
70±2||tt ||105±2
10~16
14°±1°
Table flag
150+3
100+2||tt| |60±3
5±1
0.5±0.3
2±1
50±2
75±2
8 ~12
中
hengjiancat
M
built
2
图
GB16689-1996|| tt||4.2.3 When making non-standard size regional flags due to special needs, they will be enlarged or reduced in proportion to the standard size and allowable error. 4.3 Regional flag colors and allowable errors
4.3.1 Flag red: The red in the regional flag made of cotton, silk, and chemical fiber fabrics is based on the national flag red of cotton, silk, and chemical fiber fabrics in GB12983 respectively. allow. When evaluated according to GB250, the color difference shall not be less than 3 to 4 levels. 4.3.2 White bauhinia petals: The stimulation value Y1 of the white bauhinia petals of the regional flag made of cotton, silk, or chemical fiber fabrics shall not be less than 73. 4.3.3. White flagpole cover: The white flagpole cover in GB12983 shall prevail. When evaluated according to GB250, the color difference shall not be less than 3 to 4 levels.
Metal or plastic rings that are in harmony with the color of the flag and the flagpole cover are allowed to be placed at appropriate positions on the upper and lower ends of the flagpole cover. The length of the flagpole cover is allowed to be appropriately longer than the height of the flag.
4.3.4 The red color of the regional flag made of wool or linen fabric shall be based on the red color of the national flag of silk in GB12983. When evaluated according to GB250, the color difference shall not be less than 3 to 4 levels. The white Y1. value of redbud petals is consistent with the provisions of 4.3.2 of this standard. 4.4 Dye fastness of regional flag
The dye fastness of regional flag is shown in Table 2.
Table 2 Dye fastness of regional flags
Material
Quality
Cotton, chemical fiber fabrics
Silk
Item||tt| |Mesh
Light fastness
Weather fastness
Washing fastness (fading as it is)
Light fastness
Climate color degree
Color fastness to washing (fading as it is)
Red
Color
Level 4~5
Level 3||tt| |Level 3~4
Level 3
Level 3
Level 3~4
The dye fastness of regional flags made of wool or linen fabrics shall not be lower than Requirements for silk materials in Table 2. 4.5 Regional flag sewing
Bauhinia white
Level 4~5
Level 4
4.5.1 Regional flag flag surface stitching seams are: No. 1, No. 2 The regional flag is allowed to have two seams on the flag surface; the No. 3 regional flag is only allowed to have one seam on the flag surface; the flags below No. 4 flags (including No. 4 flags) are not allowed to have seams on the flag surface; the flag surface is jointed Only horizontal splicing is allowed, vertical splicing is not allowed; the splicing seams on any flag surface shall not pass through the bauhinia pattern, and no wool yarn shall be exposed at the splicing seams. 4.5.21~The seams around the No. 5 flag and the car flag are all double-stitched. 4.5.3 The number of sewing stitches around the flag, the seam of the flag surface, the seam of the flagpole cover and the flag surface is 42 to 46 stitches per 100mm. Sewing stitches should be straight and wrinkle-free.
4.6 Flag surface evaluation
Regional flag flag surface evaluation is based on the degree of impact on the appearance of the regional flag, and is inspected on a unit basis for each flag, see Table 3. Table 3 Flag surface evaluation
item
item
red part
white part
color difference between the upper, middle and lower flag
flag Surface appearance
Test method
5
Requirement
Requirement
No obvious stains, color matching, color stains or wrinkles are allowed. Pentagrams and Hua Ci are not allowed to have obvious unclear karma, and they are not allowed to have obvious stains or color stains. The bauhinia petals are not allowed to have obvious unclear contours. When evaluated according to GB250, it is not lower than level 4. White edges, dark and light edges, and weaving defects that obviously affect the appearance are not allowed on the flag surface. It is not allowed to add decorations, text or other patterns on the flag surface (including the front and back sides) and the surrounding areas. 5.1 | GB16689-1996 | The measurement results are expressed according to the provisions of 5.1 in GB3979, that is, the measured value is expressed as the stimulation value Y1. 5.3 Regional flag dyeing rate test method:
5.3.1 Light fastness test shall be carried out in accordance with the provisions of 6.2.3 in GB/T8427. 5.3.2 The weather resistance color fastness test shall be carried out in accordance with the provisions of 6.4 in GB/T8430. 5.3.3 The color fastness test to washing is carried out in accordance with the provisions of 6.3.2 in GB/T3921. Method 1 is used for silk and chemical fiber fabrics, and method 3 is used for cotton fabrics.
5.4 The standard size and allowable error of the regional flag shall be measured using qualified measuring tools with an accuracy of not less than 0.5%. 5.5 Regional flag appearance evaluation test: Under bright natural light, 1m away from the flag, make visual judgments; when using light inspection, daylight-colored fluorescent lamps must be used, and the illumination shall not be less than 7501x. 6 Inspection Rules
6.1 The shape, pattern and standard size of the flag, flag evaluation, regional flag sewing, and forehead color quality inspection are factory inspections. Type inspection should be carried out when materials, dyes and processes change.
6.2 The number of inspection samples for each batch of products shall be 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 During the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample will be judged to be qualified; when all samples are qualified, the batch of products will be judged to be qualified, otherwise it will be judged to be unqualified. Unqualified products shall not leave the factory. 7 Packaging and logo
7.1 Each regional flag should be packaged separately, and the specifications, materials, and manufacturer's name should be indicated on the package. 7.2 The outer packaging of batch regional flags should ensure that the quality of the finished product is not damaged and facilitate transportation. The outer packaging should be marked with: product name, specifications, material, quantity, manufacturer name, dimensions, weight, and safe transportation signs. 7.3 Each regional flag should be accompanied by the manufacturer's logo. The logo is placed at the lower end of the flagpole cover. The dimensions of the flag in all directions shall not be larger than the width of the flagpole cover. The logos of car flags, signature flags, and table flags can be printed on the inside of the lower end of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9-1996
Appendix A
(Appendix to Biaotan)
Explanation of the pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
Hong Kong Special Administrative Region The regional flag is a red flag with five-star bauhinia flowers. (Quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China) The regional flag is a red flag with a five-star dynamic bauhinia pattern in the middle. The red flag represents the motherland and the bauhinia represents Hong Kong, implying that Hong Kong is an inseparable part of China and thrives in the embrace of the motherland. The five stars on the stamen symbolize the love for the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990, "On the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft)" and its Description of relevant documents") GB16689-1996
Appendix B
(Appendix to the standard recommendation)
Instructions for the production of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
(People's Republic of China Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the Republic) The regional flag has the same shape and color on both sides, and the bauhinia flowers on the flag face each other on both sides. For convenience, this article only uses the flagpole on the left side as the standard for illustration. For the flagpole on the right side, it should be made accordingly. The flag is red, and its chromaticity value is based on the red flag of the People's Republic of China. The flag is rectangular, and its length and height are the ratio of three to two. There is a white dynamic five-petal Bauhinia flower painted on the flag. The diameter of the outer circle is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center point of the flag. There is a red five-pointed star and a red stamen in each petal. The center point of the bauhinia flower is located in the center of the flag. The flagpole cover is white. The regional flag pattern is shown in Figure B1.
Figure B1 Pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
2. The general dimensions of the regional flag are as follows: No. 1: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long and 14 cm high. Table runner: 15 cm long and 10 cm high.
When regional flags of different sizes are produced due to special needs, they will be enlarged or reduced in proportion to the general size. 3. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
4. The color fastness of the regional flag
The color fastness of the regional flag is shown in Table 2.
Table 2 Dye fastness of regional flags
Material
Quality
Cotton, chemical fiber fabrics
Silk
Item||tt| |Mesh
Light fastness
Climate color fastness
Color fastness to washing (fading as it is)
Light fastness
Climate color degree
Color fastness to washing (fading as it is)
Red
Color
Level 4~5
Level 3||tt| |Level 3~4
Level 3
Level 3
Level 3~4
The dye fastness of regional flags made of wool or linen fabrics shall not be lower than Requirements for silk materials in Table 2. 4.5 Regional flag sewing
Bauhinia white
Level 4~5
Level 4
4.5.1 Regional flag flag surface stitching seams are: No. 1, No. 2 The regional flag is allowed to have two seams on the surface; the No. 3 regional flag is only allowed to have one seam on the flag; no seams are allowed on the flags below No. 4 flags (including No. 4 flags); the flag is not allowed to have seams on the flag surface; Only horizontal splicing is allowed, vertical splicing is not allowed; the splicing seams on any flag surface shall not pass through the bauhinia pattern, and no wool yarn shall be exposed at the splicing seams. 4.5.21~The seams around the No. 5 flag and the car flag are all double stitched. 4.5.3 The number of sewing stitches around the flag, the seam of the flag surface, the seam of the flagpole cover and the flag surface is 42 to 46 stitches per 100mm. Sewing stitches should be straight and wrinkle-free.
4.6 Flag surface evaluation
Regional flag flag surface evaluation is based on the degree of impact on the appearance of the regional flag, and is inspected on a unit basis for each flag, see Table 3. Table 3 Flag surface evaluation
item
item
red part
white part
color difference between the upper, middle and lower flag
flag Surface appearance
Test method
5
Requirement
Requirement
No obvious stains, color matching, color stains or wrinkles are allowed. Pentagrams and Hua Ci are not allowed to have obvious unclear karma, and they are not allowed to have obvious stains or color stains. The bauhinia petals are not allowed to have obvious unclear contours. When evaluated according to GB250, it is not lower than level 4. White edges, dark and light edges, and weaving defects that obviously affect the appearance are not allowed on the flag surface. It is not allowed to add decorations, text or other patterns on the flag surface (including the front and back sides) and the surrounding areas. 5.1 | GB16689-1996 | The measurement results are expressed according to the provisions of 5.1 in GB3979, that is, the measured value is expressed as the stimulation value Y1. 5.3 Regional flag dyeing rate test method:
5.3.1 Light fastness test shall be carried out in accordance with the provisions of 6.2.3 in GB/T8427. 5.3.2 The weather color fastness test shall be carried out in accordance with the provisions of 6.4 in GB/T8430. 5.3.3 The color fastness test to washing is carried out in accordance with the provisions of 6.3.2 in GB/T3921. Method 1 is used for silk and chemical fiber fabrics, and method 3 is used for cotton fabrics.
5.4 The standard size and allowable error of the regional flag shall be measured using qualified measuring tools with an accuracy of not less than 0.5%. 5.5 Regional flag appearance evaluation test: Under bright natural light, 1m away from the flag, make visual judgments; when using light inspection, daylight-colored fluorescent lamps must be used, and the illumination shall not be less than 7501x. 6 Inspection Rules
6.1 The shape, pattern and standard size of the flag, flag evaluation, regional flag sewing, and forehead color quality inspection are factory inspections. Type inspection should be carried out when materials, dyes and processes change.
6.2 The number of inspection samples for each batch of products shall be 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 During the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample will be judged to be qualified; when all samples are qualified, the batch of products will be judged to be qualified, otherwise it will be judged to be unqualified. Unqualified products shall not leave the factory. 7 Packaging and signs
7.1 Each regional flag should be packaged separately, and the specifications, materials, and manufacturer's name should be indicated on the package. 7.2 The outer packaging of batch regional flags should ensure that the quality of the finished product is not damaged and facilitate transportation. The outer packaging should be marked with: product name, specifications, material, quantity, manufacturer name, dimensions, weight, and safe transportation signs. 7.3 Each regional flag should be accompanied by the manufacturer's logo. The logo is placed at the lower end of the flagpole cover. The dimensions of the flag in all directions shall not be greater than the width of the flagpole cover. The logos of car flags, signature flags, and table flags can be printed on the inside of the lower end of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9-1996
Appendix A
(Appendix to Biaotan)
Description of the pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
Hong Kong Special Administrative Region The regional flag is a red flag with five-star bauhinia flowers. (Quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China) The regional flag is a red flag with a five-star dynamic bauhinia pattern in the middle. The red flag represents the motherland and the bauhinia represents Hong Kong, implying that Hong Kong is an inseparable part of China and thrives in the embrace of the motherland. The five stars on the stamen symbolize the love for the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990, "On the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft)" and its Description of relevant documents") GB16689-1996
Appendix B
(Appendix to the standard recommendation)
Instructions for the production of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
(People's Republic of China Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the Republic) The regional flag has the same shape and color on both sides, and the bauhinia flowers on the flag face each other on both sides. For convenience, this article only uses the flagpole on the left side as the standard for illustration. For the flagpole on the right side, it should be made accordingly. The flag is red, and its chromaticity value is based on the red flag of the People's Republic of China. The flag is rectangular, and its length and height are the ratio of three to two. There is a white dynamic five-petal Bauhinia flower painted on the flag. The diameter of the outer circle is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center point of the flag. There is a red five-pointed star and a red stamen in each petal. The center point of the bauhinia flower is located in the center of the flag. The flagpole cover is white. The regional flag pattern is shown in Figure B1.
Figure B1 Pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
2. The general dimensions of the regional flag are as follows: No. 1: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long and 14 cm high. Table runner: 15 cm long and 10 cm high.
When regional flags of different sizes are produced due to special needs, they will be enlarged or reduced in proportion to the general size. 3. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
4. The color fastness of the regional flag
The color fastness of the regional flag is shown in Table 2.
Table 2 Dye fastness of regional flags
Material
Quality
Cotton, chemical fiber fabrics
Silk
Item||tt| |Mesh
Light fastness
Climate color fastness
Color fastness to washing (fading as it is)
Light fastness
Climate color degree
Color fastness to washing (fading as it is)
Red
Color
Level 4~5
Level 3||tt| |Level 3~4
Level 3
Level 3
Level 3~4
The dye fastness of regional flags made of wool or linen fabrics shall not be lower than Requirements for silk materials in Table 2. 4.5 Regional flag sewing
Bauhinia white
Level 4~5
Level 4
4.5.1 Regional flag flag surface stitching seams are: No. 1, No. 2 The regional flag is allowed to have two seams on the surface; the No. 3 regional flag is only allowed to have one seam on the flag; no seams are allowed on the flags below No. 4 flags (including No. 4 flags); the flag is not allowed to have seams on the flag surface; Only horizontal splicing is allowed, vertical splicing is not allowed; the splicing seams on any flag surface shall not pass through the bauhinia pattern, and no wool yarn shall be exposed at the splicing seams. 4.5.21~The seams around the No. 5 flag and the car flag are all double stitched. 4.5.3 The number of sewing stitches around the flag, the seam of the flag surface, the seam of the flagpole cover and the flag surface is 42 to 46 stitches per 100mm. Sewing stitches should be straight and wrinkle-free.
4.6 Flag surface evaluation
Regional flag flag surface evaluation is based on the degree of impact on the appearance of the regional flag, and is inspected on a unit basis for each flag, see Table 3. Table 3 Flag surface evaluation
item
item
red part
white part
color difference between the upper, middle and lower flag
flag Surface appearance
Test method
5
Requirement
Requirement
No obvious stains, color matching, color stains or wrinkles are allowed. Pentagrams and Hua Ci are not allowed to have obvious unclear karma, and they are not allowed to have obvious stains or color stains. The bauhinia petals are not allowed to have obvious unclear contours. When evaluated according to GB250, the flag should not be lower than level 4. White edges, dark and light edges, and weaving defects that obviously affect the appearance are not allowed on the flag surface. It is not allowed to add decorations, text or other patterns on the flag surface (including the front and back sides) and the surrounding areas. 5.1 | GB16689-1996 | The measurement results are expressed according to the provisions of 5.1 in GB3979, that is, the measured value is expressed as the stimulation value Y1. 5.3 Regional flag dyeing rate test method: bZxz.net
5.3.1 Light fastness test shall be carried out in accordance with the provisions of 6.2.3 in GB/T8427. 5.3.2 The weather color fastness test shall be carried out in accordance with the provisions of 6.4 in GB/T8430. 5.3.3 The color fastness test to washing is carried out in accordance with the provisions of 6.3.2 in GB/T3921. Method 1 is used for silk and chemical fiber fabrics, and method 3 is used for cotton fabrics.
5.4 The standard size and allowable error of the regional flag shall be measured using qualified measuring tools with an accuracy of not less than 0.5%. 5.5 Regional flag appearance evaluation test: Under bright natural light, 1m away from the flag, make visual judgments; when using light inspection, daylight-colored fluorescent lamps must be used, and the illumination shall not be less than 7501x. 6 Inspection Rules
6.1 The shape, pattern and standard size of the flag, flag evaluation, regional flag sewing, and forehead color quality inspection are factory inspections. Type inspection should be carried out when materials, dyes and processes change.
6.2 The number of inspection samples for each batch of products shall be 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 During the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample will be judged to be qualified; when all samples are qualified, the batch of products will be judged to be qualified, otherwise it will be judged to be unqualified. Unqualified products shall not leave the factory. 7 Packaging and signs
7.1 Each regional flag should be packaged separately, and the specifications, materials, and manufacturer's name should be indicated on the package. 7.2 The outer packaging of batch regional flags should ensure that the quality of the finished product is not damaged and facilitate transportation. The outer packaging should be marked with: product name, specifications, material, quantity, manufacturer name, dimensions, weight, and safe transportation signs. 7.3 Each regional flag should be accompanied by the manufacturer's logo. The logo is placed at the lower end of the flagpole cover. The dimensions of the flag in all directions shall not be greater than the width of the flagpole cover. The logos of car flags, signature flags, and table flags can be printed on the inside of the lower end of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9-1996
Appendix A
(Appendix to Biaotan)
Description of the pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
Hong Kong Special Administrative Region The regional flag is a red flag with five-star bauhinia flowers. (Quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China) The regional flag is a red flag with a five-star dynamic bauhinia pattern in the middle. The red flag represents the motherland and the bauhinia represents Hong Kong, implying that Hong Kong is an inseparable part of China and thrives in the embrace of the motherland. The five stars on the stamen symbolize the love for the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990, "On the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft)" and its Description of relevant documents") GB16689-1996
Appendix B
(Appendix to the standard recommendation)
Instructions for the production of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
(People's Republic of China Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the Republic) The regional flag has the same shape and color on both sides, and the bauhinia flowers on the flag face each other on both sides. For convenience, this article only uses the flagpole on the left side as the standard for illustration. For the flagpole on the right side, it should be made accordingly. The flag is red, and its chromaticity value is based on the red flag of the People's Republic of China. The flag is rectangular, and its length and height are the ratio of three to two. There is a white dynamic five-petal Bauhinia flower painted on the flag. The diameter of the outer circle is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center point of the flag. There is a red five-pointed star and a red stamen in each petal. The center point of the bauhinia flower is located in the center of the flag. The flagpole cover is white. The regional flag pattern is shown in Figure B1.
Figure B1 Pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
2. The general dimensions of the regional flag are as follows: No. 1: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long and 14 cm high. Table runner: 15 cm long and 10 cm high.
When regional flags of different sizes are produced due to special needs, they will be enlarged or reduced in proportion to the general size. 3. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
6 Flag Assessment
The assessment of the flag is based on the degree of impact on the appearance of the flag, and is carried out on each flag as a unit, see Table 3. Table 3 Flag Assessment
Item
Red Part
White Part
Color Difference between the Upper, Middle and Lower Parts of the Flag
Flag Appearance
Test Method
5
Requirements
No obvious stains, overlapping colors, color fading and wrinkles are allowed. The five-pointed star and the flower are not allowed to have obvious unclear wheel rate. No obvious stains and color fading are allowed. The petals of the bauhinia are not allowed to have obvious unclear outlines. When assessed according to GB250, it should not be lower than Grade 4. No white edges, dark and shallow edges or weaving defects that obviously affect the appearance are allowed on the flag. It is not allowed to add decorations, words or other patterns on the flag surface (including the front and back sides) and the surrounding areas. 5.1
The color difference assessment method of the red flag surface and the white flagpole cover shall be carried out in accordance with GB250. GB16689-1996
5.2 The colorimetric measurement of the stimulus value Y1 of the white Bauhinia petals on the flag surface shall be carried out in accordance with the provisions of 3.1 and 3.2 in GB3979. The measurement results shall be expressed in accordance with the provisions of 5.1 in GB3979, that is, the measured value is expressed by the stimulus value Y1. 5.3 Test method for the dyeing rate of the regional flag:
5.3.1 The light fastness test shall be carried out in accordance with the provisions of 6.2.3 in GB/T8427. 5.3.2 The weather fastness test shall be carried out in accordance with the provisions of 6.4 in GB/T8430. 5.3.3 The washing fastness test shall be carried out in accordance with the provisions of 6.3.2 in GB/T3921, among which silk and chemical fiber fabrics shall adopt method 1, and cotton cloth shall adopt method 3.
5.4 The standard size and allowable error of the district flag shall be measured with qualified measuring tools with an accuracy of not less than 0.5%. 5.5 Appearance evaluation test of the district flag: Under bright natural light, stand 1m away from the flag and make a visual judgment; when using light inspection, a daylight fluorescent lamp with an illumination of not less than 7501x shall be used. 6 Inspection rules
6.1 The shape, pattern and standard size of the flag, flag evaluation, district flag sewing, and color quality inspection are factory inspections. Type inspection shall be carried out when the material, dye, or process changes.
6.2 The number of samples for inspection of each batch of products shall be 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 In the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample shall be judged as qualified; when all samples are qualified, the batch of products shall be judged as qualified products, otherwise they shall be unqualified products. Unqualified products shall not be shipped out of the factory. 7 Packaging and marking
7.1 Each flag should be packed separately, and the specifications, materials and manufacturer's name should be indicated on the packaging. 7.2 The outer packaging of batch flags should ensure that the quality of the finished product is not damaged and is convenient for transportation. The outer packaging should indicate: product name, specifications, materials, quantity, manufacturer's name, external dimensions, weight, and safe transportation mark. 7.3 Each flag should be accompanied by the manufacturer's mark. The mark is placed at the bottom of the flagpole cover. The dimensions of the mark in each direction shall not be larger than the width of the flagpole cover. The marks of car flags, signature flags and table flags can be printed on the inside of the bottom of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9—1996
Appendix A
(Appendix to the standard)
Description of the design of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
The regional flag of the Hong Kong Special Administrative Region is a red flag with a bauhinia flower with five stars in the pistil (cited from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China). The regional flag is a red flag with a dynamic bauhinia flower pattern with five stars in the middle. The red flag represents the motherland, and the bauhinia flower represents Hong Kong, implying that Hong Kong is an inseparable part of China and prospers in the embrace of the motherland. The five stars on the pistil symbolize the love of the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from the Explanation on the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft) and Related Documents" by Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990) GB16689-1996
Appendix B
(Appendix to the Standard)
Instructions for the Production of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China
(Provisional Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the People's Republic of China) The shape and color of the regional flag are the same on both sides, and the two sides of the bauhinia flowers on the flag face each other. For convenience, this document only uses the side with the flagpole on the left as the standard for explanation. For the side with the flagpole on the right, both sides should be produced accordingly. The flag is red, and its chromaticity value is based on the red of the national flag of the People's Republic of China. The flag is rectangular, with a ratio of three to two between its length and height. A white dynamic five-petal bauhinia flower is painted in the middle of the flag, and its outer diameter is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center of the flag. There is a red five-pointed star and a red stamen in each petal. The center of the bauhinia flower is located in the center of the flag. The flagpole cover is white. See Figure B1 for the regional flag pattern.
Figure B1 Design of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
II. The general dimensions of the regional flag are as follows: No. 1: 288 cm long, 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long, 14 cm high. Table flag: 15 cm long, 10 cm high.
When making district flags of different sizes due to special needs, they are all enlarged or reduced in proportion to the general size. III. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
6 Flag surface evaluation
Regional flag flag surface evaluation is based on the degree of impact on the appearance of the regional flag, and is inspected on a unit basis for each flag, see Table 3. Table 3 Flag surface evaluation
item
item
red part
white part
color difference between the upper, middle and lower flag
flag Surface appearance
Test method
5
Requirement
Requirement
No obvious stains, color matching, color stains or wrinkles are allowed. Pentagrams and Hua Ci are not allowed to have obvious unclear karma, and they are not allowed to have obvious stains or color stains. The bauhinia petals are not allowed to have obvious unclear contours. When evaluated according to GB250, it is not lower than level 4. White edges, dark and light edges, and weaving defects that obviously affect the appearance are not allowed on the flag surface. It is not allowed to add decorations, text or other patterns on the flag surface (including the front and back sides) and the surrounding areas. 5.1 | GB16689-1996 | The measurement results are expressed according to the provisions of 5.1 in GB3979, that is, the measured value is expressed as the stimulation value Y1. 5.3 Regional flag dyeing rate test method:
5.3.1 Light fastness test shall be carried out in accordance with the provisions of 6.2.3 in GB/T8427. 5.3.2 The weather resistance color fastness test shall be carried out in accordance with the provisions of 6.4 in GB/T8430. 5.3.3 The color fastness test to washing is carried out in accordance with the provisions of 6.3.2 in GB/T3921. Method 1 is used for silk and chemical fiber fabrics, and method 3 is used for cotton fabrics.
5.4 The standard size and allowable error of the regional flag shall be measured using qualified measuring tools with an accuracy of not less than 0.5%. 5.5 Regional flag appearance evaluation test: Under bright natural light, 1m away from the flag, make visual judgments; when using light inspection, daylight-colored fluorescent lamps must be used, and the illumination shall not be less than 7501x. 6 Inspection Rules
6.1 The shape, pattern and standard size of the flag, flag evaluation, regional flag sewing, and forehead color quality inspection are factory inspections. Type inspection should be carried out when materials, dyes and processes change.
6.2 The number of inspection samples for each batch of products shall be 2% of the total number of products in the batch, but shall not be less than 10; samples shall be randomly selected. 6.3 During the inspection of each batch of products, if all the inspection items of each sample are qualified, the sample will be judged to be qualified; when all samples are qualified, the batch of products will be judged to be qualified, otherwise it will be judged to be unqualified. Unqualified products shall not leave the factory. 7 Packaging and signs
7.1 Each regional flag should be packaged separately, and the specifications, materials, and manufacturer's name should be indicated on the package. 7.2 The outer packaging of batch regional flags should ensure that the quality of the finished product is not damaged and facilitate transportation. The outer packaging should be marked with: product name, specifications, material, quantity, manufacturer name, dimensions, weight, and safe transportation signs. 7.3 Each regional flag should be accompanied by the manufacturer's logo. The logo is placed at the lower end of the flagpole cover. The dimensions of the flag in all directions shall not be greater than the width of the flagpole cover. The logos of car flags, signature flags, and table flags can be printed on the inside of the lower end of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9-1996
Appendix A
(Appendix to Biaotan)
Explanation of the pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
Hong Kong Special Administrative Region The regional flag is a red flag with five-star bauhinia flowers. (Quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China) The regional flag is a red flag with a five-star dynamic bauhinia pattern in the middle. The red flag represents the motherland and the bauhinia represents Hong Kong, implying that Hong Kong is an inseparable part of China and thrives in the embrace of the motherland. The five stars on the stamen symbolize the love for the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990, "On the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft)" and its Description of relevant documents") GB16689-1996
Appendix B
(Appendix to the standard recommendation)
Instructions for the production of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
(People's Republic of China Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the Republic) The regional flag has the same shape and color on both sides, and the bauhinia flowers on the flag face each other on both sides. For convenience, this article only uses the flagpole on the left side as the standard for illustration. For the flagpole on the right side, it should be made accordingly. The flag is red, and its chromaticity value is based on the red flag of the People's Republic of China. The flag is rectangular, and its length and height are the ratio of three to two. There is a white dynamic five-petal Bauhinia flower painted on the flag. The diameter of the outer circle is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center point of the flag. There is a red five-pointed star and a red stamen in each petal. The center point of the bauhinia flower is located in the center of the flag. The flagpole cover is white. The regional flag pattern is shown in Figure B1.
Figure B1 Pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
2. The general dimensions of the regional flag are as follows: No. 1: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long and 14 cm high. Table runner: 15 cm long and 10 cm high.
When regional flags of different sizes are produced due to special needs, they will be enlarged or reduced in proportion to the general size. 3. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
3 Each regional flag shall be accompanied by the manufacturer's logo. The logo is placed at the bottom of the flagpole sleeve. The dimensions of the logo in each direction shall not be greater than the width of the flagpole sleeve. The logo of the car flag, signature flag and table flag can be pasted and printed on the inside of the bottom of the flagpole sleeve or on the lower right side of the single-sided outer packaging bag. GB16689
9—1996
Appendix A
(Appendix to the standard)
Description of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
The regional flag of the Hong Kong Special Administrative Region is a red flag with a bauhinia flower with five stars in the pistil (quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China). The regional flag is a red flag with a dynamic bauhinia flower pattern with five stars in the middle. The red flag represents the motherland, and the bauhinia flower represents Hong Kong, implying that Hong Kong is an inseparable part of China and prospers in the embrace of the motherland. The five stars on the pistil symbolize the love of the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from the Explanation on the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft) and Related Documents" by Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990) GB16689-1996
Appendix B
(Appendix to the Standard)
Instructions for the Production of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China
(Provisional Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the People's Republic of China) The shape and color of the regional flag are the same on both sides, and the two sides of the bauhinia flowers on the flag face each other. For convenience, this document only uses the side with the flagpole on the left as the standard for explanation. For the side with the flagpole on the right, both sides should be produced accordingly. The flag is red, and its chromaticity value is based on the red of the national flag of the People's Republic of China. The flag is rectangular, with a ratio of three to two between its length and height. A white dynamic five-petal bauhinia flower is painted in the middle of the flag, and its outer diameter is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center of the flag. There is a red five-pointed star and a red stamen in each petal. The center of the bauhinia flower is located in the center of the flag. The flagpole cover is white. See Figure B1 for the regional flag pattern.
Figure B1 Design of the Regional Flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
II. The general dimensions of the regional flag are as follows: No. 1: 288 cm long, 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long, 14 cm high. Table flag: 15 cm long, 10 cm high.
When making district flags of different sizes due to special needs, they are all enlarged or reduced in proportion to the general size. III. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
3. Each regional flag should be accompanied by the manufacturer's logo. The logo is placed at the lower end of the flagpole cover. The dimensions of the flag in all directions shall not be larger than the width of the flagpole cover. The logos of car flags, signature flags, and table flags can be printed on the inside of the lower end of the flagpole cover or on the lower right side of the single-sided outer packaging bag. GB16689
9-1996
Appendix A
(Appendix to Biaotan)
Explanation of the pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
Hong Kong Special Administrative Region The regional flag is a red flag with five-star bauhinia flowers. (Quoted from Article 10 of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China) The regional flag is a red flag with a five-star dynamic bauhinia pattern in the middle. The red flag represents the motherland and the bauhinia represents Hong Kong, implying that Hong Kong is an inseparable part of China and thrives in the embrace of the motherland. The five stars on the stamen symbolize the love for the motherland in the hearts of Hong Kong compatriots, and the red and white colors embody the spirit of "one country, two systems". (Quoted from Ji Pengfei, Chairman of the Drafting Committee of the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China, at the Third Session of the Seventh National People's Congress on March 28, 1990, "On the Basic Law of the Hong Kong Special Administrative Region of the People's Republic of China (Draft)" and its Description of relevant documents") GB16689-1996
Appendix B
(Appendix to the standard recommendation)
Instructions for the production of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China
(People's Republic of China Interim Measures for the Use of the Regional Flag and Regional Emblem of the Hong Kong Special Administrative Region of the Republic) The regional flag has the same shape and color on both sides, and the bauhinia flowers on the flag face each other on both sides. For convenience, this article only uses the flagpole on the left side as the standard for illustration. For the flagpole on the right side, it should be made accordingly. The flag is red, and its chromaticity value is based on the red flag of the People's Republic of China. The flag is rectangular, and its length and height are the ratio of three to two. There is a white dynamic five-petal Bauhinia flower painted on the flag. The diameter of the outer circle is three-fifths of the height of the flag. The petals are evenly arranged clockwise around the center point of the flag. There is a red five-pointed star and a red stamen in each petal. The center point of the bauhinia flower is located in the center of the flag. The flagpole cover is white. The regional flag pattern is shown in Figure B1.
Figure B1 Pattern of the regional flag of the Hong Kong Special Administrative Region of the People's Republic of China GB16689--1996
2. The general dimensions of the regional flag are as follows: No. 1: 288 cm long and 192 cm high.
No. 2: 240 cm long, 160 cm high.
No. 3: 192 cm long, 128 cm high.
No. 4: 144 cm long, 96 cm high.
No. 5: 96 cm long, 64 cm high.
Car flag: 30 cm long, 20 cm high.
Signature flag: 21 cm long and 14 cm high. Table runner: 15 cm long and 10 cm high.
When regional flags of different sizes are produced due to special needs, they will be enlarged or reduced in proportion to the general size. 3. Bauhinia flower positioning map
14°
Figure B2 Bauhinia flower positioning map
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.